|
|
|
|
|
|
|
|
|
|
|
|
|
|
Shorter length great for shallow walls. White color blends with white walls. Non-conductive/non-corroding nylon. Maximum fixture thickness 3/4 in #8 x 1-1/4 in sheet metal screw. Accommodates loads to 75 lb. Drills directly into drywall. Installs quickly and easily with a #2 Phillips or cordless screwdriver; removable and reusable. Applications smoke detectors, clocks, bathroom accessories, thermostats, plaques and awards, decorative wall hangings, picture frames, coat racks.
|
Starts easier than other self-drilling drywall anchors. No pre-drilling required; can accommodate #6 to #8 Dia screws of any length. Up to 50 lb load capacity. Drills directly into drywall or wood studs. Zinc die-cast design for maximum durability. A superior alternative to traditional plastic plugs and mollies. Installs quickly and easily with a #2 Phillips or cordless screwdriver. #7 x 1-1/4 in sheet metal screw; Maximum fixture thickness - 3/4 in. Removable. Applications - closet organizers, electrical fixtures, curtain rods, HVAC fixtures, plumbing fixtures, light shelving and supports, Signs.
|
Shorter length great for shallow walls. White color blends with white walls. Non-conducive/non-corroding nylon. Maximum fixture thickness 3/4 in. #6 x 1-1/4 in sheet metal screw. Accommodates loads to 30 lb. Drills directly into drywall. Installs quickly and easily with a #2 Phillips or cordless screwdriver; removable and reusable. Applications -Smoke detectors, clocks, bathroom accessories, thermostats, plaques and awards, decorative wall hangings, picture frames, coat racks.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
The Spring Toggle Bolt is a toggle anchor made of steel and is ideal for fixing heavy items to the wall or ceiling. It is offered in a variety of lengths to accommodate thicker material. The two metal wings are spring loaded and open behind the wall when inserted.
|
The FlipToggle? anchor's strong toggling mechanism supplies extra holding power in drywall, plaster or hollow concrete blocks. Its main feature is its ability to be installed in thicker hollow wall material, up to 3 in thick. Its simple and effective tilting mechanism ensures a trouble-free installation every time and is twice as strong as the regular toggle bolt of the same bolt diameter. The FlipToggle? requires a 1/2 in hole regardless of its diameter and can be used with any bolt length.
|
The Spring Toggle Bolt is a toggle anchor made of steel and is ideal for fixing heavy items to the wall or ceiling. It is offered in a variety of lengths to accommodate thicker material. The two metal wings are spring loaded and open behind the wall when inserted.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
The Spring Toggle Bolt is a toggle anchor made of steel and is ideal for fixing heavy items to the wall or ceiling. It is offered in a variety of lengths to accommodate thicker material. The two metal wings are spring loaded and open behind the wall when inserted.
|
The Nylon Toggle? is made of resistant nylon with wings that expands behind the drywall. It is therefore rustproof and very economical.
|
The Nylon Toggle? is made of resistant nylon with wings that expands behind the drywall. It is therefore rustproof and very economical.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
The Nylon Toggle? is made of resistant nylon with wings that expands behind the drywall. It is therefore rustproof and very economical.
|
The Spring Toggle Bolt is a toggle anchor made of steel and is ideal for fixing heavy items to the wall or ceiling. It is offered in a variety of lengths to accommodate thicker material. The two metal wings are spring loaded and open behind the wall when inserted.
|
The WallDriller? is designed to offer the maximum holding power in drywall material. Its fine centered point helps guide the anchor into the wall with flawless precision. A sharp profile thread cuts deeply into the hole without damaging the drywall, ensuring maximum holding power and stability. The sharp cutting edge reduces the force required to cut the material, making it a self-drilling anchor without pre-drilling.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Can be used in all types of masonry. Corrosion resistant. It is internally threaded and installs flush to surface.
|
The Spring Toggle Bolt is a toggle anchor made of steel and is ideal for fixing heavy items to the wall or ceiling. It is offered in a variety of lengths to accommodate thicker material. The two metal wings are spring loaded and open behind the wall when inserted.
|
The FlipToggle? anchor's strong toggling mechanism supplies extra holding power in drywall, plaster or hollow concrete blocks. Its main feature is its ability to be installed in thicker hollow wall material, up to 3 in thick. Its simple and effective tilting mechanism ensures a trouble-free installation every time and is twice as strong as the regular toggle bolt of the same bolt diameter. The FlipToggle? requires a 1/2 in hole regardless of its diameter and can be used with any bolt length.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
The Spring Toggle Bolt is a toggle anchor made of steel and is ideal for fixing heavy items to the wall or ceiling. It is offered in a variety of lengths to accommodate thicker material. The two metal wings are spring loaded and open behind the wall when inserted.
|
Can be used in all types of masonry. Corrosion resistant. It is internally threaded and installs flush to surface.
|
The TripleGrip? is one of the most technologically advanced anchor on the market. It is designed with two expandable wings that grip tightly behind the drywall for a maximum holding power. Its advanced cam-action technology expands; thereby creating an additional pressure against the side walls of the drywall or masonry. This also provides more stability and strength. Two lateral wings hold the anchor in place, preventing any rotation while the screw is inserted.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
The TripleGrip? is one of the most technologically advanced anchor on the market. It is designed with two expandable wings that grip tightly behind the drywall for a maximum holding power. Its advanced cam-action technology expands; thereby creating an additional pressure against the side walls of the drywall or masonry. This also provides more stability and strength. Two lateral wings hold the anchor in place, preventing any rotation while the screw is inserted.
|
The TripleGrip? is one of the most technologically advanced anchor on the market. It is designed with two expandable wings that grip tightly behind the drywall for a maximum holding power. Its advanced cam-action technology expands; thereby creating an additional pressure against the side walls of the drywall or masonry. This also provides more stability and strength. Two lateral wings hold the anchor in place, preventing any rotation while the screw is inserted.
|
The TripleGrip? is one of the most technologically advanced anchor on the market. It is designed with two expandable wings that grip tightly behind the drywall for a maximum holding power. Its advanced cam-action technology expands; thereby creating an additional pressure against the side walls of the drywall or masonry. This also provides more stability and strength. Two lateral wings hold the anchor in place, preventing any rotation while the screw is inserted.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Can be used in all types of masonry. Corrosion resistant. It is internally threaded and installs flush to surface.
|
The WallDriller? is designed to offer the maximum holding power in drywall material. Its fine centered point helps guide the anchor into the wall with flawless precision. A sharp profile thread cuts deeply into the hole without damaging the drywall, ensuring maximum holding power and stability. The sharp cutting edge reduces the force required to cut the material, making it a self-drilling anchor without pre-drilling.
|
The WallDriller? is designed to offer the maximum holding power in drywall material. Its fine centered point helps guide the anchor into the wall with flawless precision. A sharp profile thread cuts deeply into the hole without damaging the drywall, ensuring maximum holding power and stability. The sharp cutting edge reduces the force required to cut the material, making it a self-drilling anchor without pre-drilling.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
The WallDriller? is designed to offer the maximum holding power in drywall material. Its fine centered point helps guide the anchor into the wall with flawless precision. A sharp profile thread cuts deeply into the hole without damaging the drywall, ensuring maximum holding power and stability. The sharp cutting edge reduces the force required to cut the material, making it a self-drilling anchor without pre-drilling.
|
Can be used in all types of masonry. Corrosion resistant. It is internally threaded and installs flush to surface.
|
Corrosion resistant. It is internally threaded and it installs flush to surface.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
The DrillerToggle? provides the holding power of a toggle bolt with the ease of installation of a WallDriller?. The toggle action supplies extra holding power in drywall, while its self-drilling tip eliminates all the extra hassles and messes of installing a regular toggle anchor. The DrillerToggle? fine centered point helps guide the anchor into the wall with a flawless precision. Its sharp cutting edge reduces the force required to cut the material and its powerful toggling mechanism holds tightly behind the drywall.
|
Simply taps into drywall, no pre-drilling, vibration resistant.
|
Pre-assembled unit. Three head styles of screws available. Sizes available from 1/8 in extra short to 1/4 in extra long.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
The Cobra designed plastic screw anchors are one of the most universally used anchors in the hardware market. The plastic anchor has notched wings with two expansion points to prevent the anchor from rotating as the screw is inserted.
|
Pre-assembled unit. Three head styles of screws available. Sizes available from 1/8 in extra short to 1/4 in extra long.
|
Pre-assembled unit. Three head styles of screws available. Sizes available from 1/8 in extra short to 1/4 in extra long.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Pre-assembled unit. Three head styles of screws available. Sizes available from 1/8 in extra short to 1/4 in extra long.
|
The WallDriller? is designed to offer the maximum holding power in drywall material. Its fine centered point helps guide the anchor into the wall with flawless precision. A sharp profile thread cuts deeply into the hole without damaging the drywall, ensuring maximum holding power and stability. The sharp cutting edge reduces the force required to cut the material, making it a self-drilling anchor without pre-drilling.
|
Simply taps into drywall, no pre-drilling, vibration resistant.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Corrosion resistant. It is internally threaded and it installs flush to surface.
|
The Cobra designed plastic screw anchors are one of the most universally used anchors in the hardware market. The plastic anchor has notched wings with two expansion points to prevent the anchor from rotating as the screw is inserted.
|
Midwest Fastener Conical Anchor, 5/16 in Dia, Thread Size: #14-16, 1-1/2 in L, Plastic, Suitable for: #14 x 1-1/2 in Screw
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Pre-assembled unit. Three head styles of screws available. Sizes available from 1/8 in extra short to 1/4 in extra long.
|
Pre-assembled unit. Three head styles of screws available. Sizes available from 1/8 in extra short to 1/4 in extra long.
|
The Cobra designed plastic screw anchors are one of the most universally used anchors in the hardware market. The plastic anchor has notched wings with two expansion points to prevent the anchor from rotating as the screw is inserted.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
The Cobra designed plastic screw anchors are one of the most universally used anchors in the hardware market. The plastic anchor has notched wings with two expansion points to prevent the anchor from rotating as the screw is inserted.
|
The WallDriller? is designed to offer the maximum holding power in drywall material. Its fine centered point helps guide the anchor into the wall with flawless precision. A sharp profile thread cuts deeply into the hole without damaging the drywall, ensuring maximum holding power and stability. The sharp cutting edge reduces the force required to cut the material, making it a self-drilling anchor without pre-drilling.
|
Secure attachment to concrete, block and brick. One-piece design requires no assembly, does not require anchor torque-down, cracked and seismic approved. Blue ClimaSeal adds corrosion resistance. ANSI drill bit required.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
The WallDriller? is designed to offer the maximum holding power in drywall material. Its fine centered point helps guide the anchor into the wall with flawless precision. A sharp profile thread cuts deeply into the hole without damaging the drywall, ensuring maximum holding power and stability. The sharp cutting edge reduces the force required to cut the material, making it a self-drilling anchor without pre-drilling.
|
The WallGripper? is the only expandable screw-in anchor on the market. It expands and grips behind the drywall and it is twice as strong as a regular screw-in anchor. Its patented design offers the ultimate holding power without any pre-drilling. Its unique body design consists of four expandable wings that collapse and grip tightly behind the drywall. A fine centered point helps guide the anchor into the wall with flawless precision. A sharp cutting edge reduces the force required to cut the material. Also, a sharp profile thread cuts deeply into the hole to ensure ultimate holding power and stability without damaging the wall material.
|
The DrillerToggle? provides the holding power of a toggle bolt with the ease of installation of a WallDriller?. The toggle action supplies extra holding power in drywall, while its self-drilling tip eliminates all the extra hassles and messes of installing a regular toggle anchor. The DrillerToggle? fine centered point helps guide the anchor into the wall with a flawless precision. Its sharp cutting edge reduces the force required to cut the material and its powerful toggling mechanism holds tightly behind the drywall.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
The WallDriller? is designed to offer the maximum holding power in drywall material. Its fine centered point helps guide the anchor into the wall with flawless precision. A sharp profile thread cuts deeply into the hole without damaging the drywall, ensuring maximum holding power and stability. The sharp cutting edge reduces the force required to cut the material, making it a self-drilling anchor without pre-drilling.
|
The Parawedge? anchor stud is cold formed and consists of a threaded section with standard coarse bolt threads at one end and a parabolic shaped taper mandrel neck at the opposite end for a smoother expansion. It has a 360 deg clip for more contact, a torque controlled expansion and can be installed into a bottomless hole.
|
The DrillerToggle? provides the holding power of a toggle bolt with the ease of installation of a WallDriller?. The toggle action supplies extra holding power in drywall, while its self-drilling tip eliminates all the extra hassles and messes of installing a regular toggle anchor. The DrillerToggle? fine centered point helps guide the anchor into the wall with a flawless precision. Its sharp cutting edge reduces the force required to cut the material and its powerful toggling mechanism holds tightly behind the drywall.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
The COBRATAP concrete screws are designed with a high and low thread to cut the concrete more effectively and to keep its alignment. It is made of tempered, high-grade steel to ensure the best torque and maximum holding power and is-coated with the corrosion-resistant Cobra-Coat?. The COBRATAP is ACQ compatible and is offered with a flat head or a hexagonal head. The fat head style contains a bonus drill bit in the 10-piece pack, while a drill bit and drive bit are included in all packs of 25 and 100 pieces.
|
The COBRATAP concrete screws are designed with a high and low thread to cut the concrete more effectively and to keep its alignment. It is made of tempered, high-grade steel to ensure the best torque and maximum holding power and is-coated with the corrosion-resistant Cobra-Coat?. The COBRATAP is ACQ compatible and is offered with a flat head or a hexagonal head. The hexagonal head style contains a bonus drill bit in the 10-piece pack, while a drill bit and socket drive are included in all packs of 25 and 100 pieces.
|
Midwest Fastener Conical Anchor, 3/16 in Dia, Thread Size: #8-10, 7/8 in L, Plastic, Suitable for: #8 x 1 in Screw
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
The Parawedge? anchor stud is cold formed and consists of a threaded section with standard coarse bolt threads at one end and a parabolic shaped taper mandrel neck at the opposite end for a smoother expansion. It has a 360 deg clip for more contact, a torque controlled expansion and can be installed into a bottomless hole.
|
Pre-assembled, all-purpose medium duty anchor. One-step installation. Corrosion resistant. A masonry drill bit is included in all "R" packs of 4 pieces.
|
Can be used in all types of masonry. Corrosion resistant. It is internally threaded and installs flush to surface.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
The COBRATAP concrete screws are designed with a high and low thread to cut the concrete more effectively and to keep its alignment. It is made of tempered, high-grade steel to ensure the best torque and maximum holding power and is-coated with the corrosion-resistant Cobra-Coat?. The COBRATAP is ACQ compatible and is offered with a flat head or a hexagonal head. The fat head style contains a bonus drill bit in the 10-piece pack, while a drill bit and drive bit are included in all packs of 25 and 100 pieces.
|
The COBRATAP concrete screws are designed with a high and low thread to cut the concrete more effectively and to keep its alignment. It is made of tempered, high-grade steel to ensure the best torque and maximum holding power and is-coated with the corrosion-resistant Cobra-Coat?. The COBRATAP is ACQ compatible and is offered with a flat head or a hexagonal head. The hexagonal head style contains a bonus drill bit in the 10-piece pack, while a drill bit and socket drive are included in all packs of 25 and 100 pieces.
|
The DrillerToggle? provides the holding power of a toggle bolt with the ease of installation of a WallDriller?. The toggle action supplies extra holding power in drywall, while its self-drilling tip eliminates all the extra hassles and messes of installing a regular toggle anchor. The DrillerToggle? fine centered point helps guide the anchor into the wall with a flawless precision. Its sharp cutting edge reduces the force required to cut the material and its powerful toggling mechanism holds tightly behind the drywall.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Midwest Fastener Conical Anchor, 1/4 in Dia, Thread Size: #10-12, 1 in L, Plastic, Suitable for: #10 x 1-1/4 in Screw
|
The DrillerToggle? provides the holding power of a toggle bolt with the ease of installation of a WallDriller?. The toggle action supplies extra holding power in drywall, while its self-drilling tip eliminates all the extra hassles and messes of installing a regular toggle anchor. The DrillerToggle? fine centered point helps guide the anchor into the wall with a flawless precision. Its sharp cutting edge reduces the force required to cut the material and its powerful toggling mechanism holds tightly behind the drywall.
|
Secure attachment to concrete, block and brick. One-piece design requires no assembly, does not require anchor torque-down, cracked and seismic approved. Blue ClimaSeal adds corrosion resistance. ANSI drill bit required.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
The WallGripper? is the only expandable screw-in anchor on the market. It expands and grips behind the drywall and it is twice as strong as a regular screw-in anchor. Its patented design offers the ultimate holding power without any pre-drilling. Its unique body design consists of four expandable wings that collapse and grip tightly behind the drywall. A fine centered point helps guide the anchor into the wall with flawless precision. A sharp cutting edge reduces the force required to cut the material. Also, a sharp profile thread cuts deeply into the hole to ensure ultimate holding power and stability without damaging the wall material.
|
The WallGripper? is the only expandable screw-in anchor on the market. It expands and grips behind the drywall and it is twice as strong as a regular screw-in anchor. Its patented design offers the ultimate holding power without any pre-drilling. Its unique body design consists of four expandable wings that collapse and grip tightly behind the drywall. A fine centered point helps guide the anchor into the wall with flawless precision. A sharp cutting edge reduces the force required to cut the material. Also, a sharp profile thread cuts deeply into the hole to ensure ultimate holding power and stability without damaging the wall material.
|
The Parawedge? anchor stud is cold formed and consists of a threaded section with standard coarse bolt threads at one end and a parabolic shaped taper mandrel neck at the opposite end for a smoother expansion. It has a 360 deg clip for more contact, a torque controlled expansion and can be installed into a bottomless hole.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
The COBRATAP concrete screws are designed with a high and low thread to cut the concrete more effectively and to keep its alignment. It is made of tempered, high-grade steel to ensure the best torque and maximum holding power and is-coated with the corrosion-resistant Cobra-Coat?. The COBRATAP is ACQ compatible and is offered with a flat head or a hexagonal head. The fat head style contains a bonus drill bit in the 10-piece pack, while a drill bit and drive bit are included in all packs of 25 and 100 pieces.
|
The COBRATAP concrete screws are designed with a high and low thread to cut the concrete more effectively and to keep its alignment. It is made of tempered, high-grade steel to ensure the best torque and maximum holding power and is-coated with the corrosion-resistant Cobra-Coat?. The COBRATAP is ACQ compatible and is offered with a flat head or a hexagonal head. The hexagonal head style contains a bonus drill bit in the 10-piece pack, while a drill bit and socket drive are included in all packs of 25 and 100 pieces.
|
Midwest Fastener Anchor Kit with Screw, Screw Size: #10-12 x 1 in, Zinc, Suitable for: #10-12 x 1 in Screw
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Midwest Fastener Anchor Kit with Screw, Screw Size: #6-8 x 3/4 in, Zinc, Suitable for: #6-8 x 3/4 in Screw
|
Midwest Fastener Anchor Kit, Plastic, Includes: (1) #12, #14 and #16 Anchors
|
Secure attachment to concrete, block and brick. One-piece design requires no assembly, does not require anchor torque-down, cracked and seismic approved. Blue ClimaSeal adds corrosion resistance. ANSI drill bit required.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
The WallDriller? is designed to offer the maximum holding power in drywall material. Its fine centered point helps guide the anchor into the wall with flawless precision. A sharp profile thread cuts deeply into the hole without damaging the drywall, ensuring maximum holding power and stability. The sharp cutting edge reduces the force required to cut the material, making it a self-drilling anchor without pre-drilling.
|
The TripleGrip? is one of the most technologically advanced anchor on the market. It is designed with two expandable wings that grip tightly behind the drywall for a maximum holding power. Its advanced cam-action technology expands; thereby creating an additional pressure against the side walls of the drywall or masonry. This also provides more stability and strength. Two lateral wings hold the anchor in place, preventing any rotation while the screw is inserted.
|
The COBRATAP concrete screws are designed with a high and low thread to cut the concrete more effectively and to keep its alignment. It is made of tempered, high-grade steel to ensure the best torque and maximum holding power and is-coated with the corrosion-resistant Cobra-Coat?. The COBRATAP is ACQ compatible and is offered with a flat head or a hexagonal head. The fat head style contains a bonus drill bit in the 10-piece pack, while a drill bit and drive bit are included in all packs of 25 and 100 pieces.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
The COBRATAP concrete screws are designed with a high and low thread to cut the concrete more effectively and to keep its alignment. It is made of tempered, high-grade steel to ensure the best torque and maximum holding power and is-coated with the corrosion-resistant Cobra-Coat?. The COBRATAP is ACQ compatible and is offered with a flat head or a hexagonal head. The hexagonal head style contains a bonus drill bit in the 10-piece pack, while a drill bit and socket drive are included in all packs of 25 and 100 pieces.
|
The Cobra designed plastic screw anchors are one of the most universally used anchors in the hardware market. The plastic anchor has notched wings with two expansion points to prevent the anchor from rotating as the screw is inserted.
|
The drive nail anchor is easy to install and ideal for light-duty and tamperproof applications in any type of masonry. It is a two-piece nail-in anchor comprised of a corrosion-resistant die-cast zinc alloy anchor body, with the choice of a steel or stainless steel nail.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
The Cobra designed plastic screw anchors are one of the most universally used anchors in the hardware market. The plastic anchor has notched wings with two expansion points to prevent the anchor from rotating as the screw is inserted.
|
The COBRATAP concrete screws are designed with a high and low thread to cut the concrete more effectively and to keep its alignment. It is made of tempered, high-grade steel to ensure the best torque and maximum holding power and is-coated with the corrosion-resistant Cobra-Coat?. The COBRATAP is ACQ compatible and is offered with a flat head or a hexagonal head. The fat head style contains a bonus drill bit in the 10-piece pack, while a drill bit and drive bit are included in all packs of 25 and 100 pieces.
|
The COBRATAP concrete screws are designed with a high and low thread to cut the concrete more effectively and to keep its alignment. It is made of tempered, high-grade steel to ensure the best torque and maximum holding power and is-coated with the corrosion-resistant Cobra-Coat?. The COBRATAP is ACQ compatible and is offered with a flat head or a hexagonal head. The hexagonal head style contains a bonus drill bit in the 10-piece pack, while a drill bit and socket drive are included in all packs of 25 and 100 pieces.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
The TripleGrip? is one of the most technologically advanced anchor on the market. It is designed with two expandable wings that grip tightly behind the drywall for a maximum holding power. Its advanced cam-action technology expands; thereby creating an additional pressure against the side walls of the drywall or masonry. This also provides more stability and strength. Two lateral wings hold the anchor in place, preventing any rotation while the screw is inserted.
|
The TripleGrip? is one of the most technologically advanced anchor on the market. It is designed with two expandable wings that grip tightly behind the drywall for a maximum holding power. Its advanced cam-action technology expands; thereby creating an additional pressure against the side walls of the drywall or masonry. This also provides more stability and strength. Two lateral wings hold the anchor in place, preventing any rotation while the screw is inserted.
|
The COBRATAP concrete screws are designed with a high and low thread to cut the concrete more effectively and to keep its alignment. It is made of tempered, high-grade steel to ensure the best torque and maximum holding power and is-coated with the corrosion-resistant Cobra-Coat?. The COBRATAP is ACQ compatible and is offered with a flat head or a hexagonal head. The fat head style contains a bonus drill bit in the 10-piece pack, while a drill bit and drive bit are included in all packs of 25 and 100 pieces.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Midwest Fastener Masonry Screw, 1/4 in Dia, 2-1/4 in L, Drill Size: 3/16 in, Head Type: Flat, Phillips, Steel, Blue Ruspert
|
Midwest Fastener Screw, Drive Type: Phillips, Package Quantity: 1 PK, Applicable Materials: Concrete
|
Midwest Fastener Masonry Screw, 3/16 in Dia, 3-1/4 in L, Drill Size: 5/32 in, Head Type: Flat, Phillips, Steel, Blue Ruspert
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Midwest Fastener Masonry Screw, 1/4 in Dia, 3-1/4 in L, Drill Size: 3/16 in, Head Type: Flat, Phillips, Steel, Blue Ruspert
|
Midwest Fastener Masonry Screw, 1/4 in Dia, 1-3/4 in L, Drill Size: 3/16 in, Head Type: Flat, Phillips, Steel, Blue Ruspert
|
Midwest Fastener Masonry Screw, 1/4 in Dia, 3-1/4 in L, Drill Size: 3/16 in, Head Type: Hex, Slotted, Steel, Blue Ruspert
|
|
|
Headquarters Palm City, Jensen Beach, Stuart
