|
|
|
|
|
|
|
|
|
|
|
|
|
|
Fits up to 1-3/8 in Dia closet poles. Reinforced design allows for interior and exterior uses. Single screw mounting. Includes one pair of pole sockets and screws.
|
National Hardware V211S Bracket Screw, Steel, Zinc
|
National Hardware V108S Bracket Screw, Steel, White
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Fits up to 1-3/8 in Dia closet poles. Includes one pair of pole sockets and screws.
|
National Hardware V211S Bracket Screw, Steel, White
|
National Hardware BPB107 Pole Socket Set, Polypropylene, White, Suitable for: Up to 1-3/8 in Dia Pole, Includes: Fasteners
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
National Hardware MPB107 Pole Socket Set, Polypropylene, White, Suitable for: Up to 1-3/8 in Dia Pole, Includes: Fasteners
|
"Accepts a 1-3/8"" diameter standard wood pole. 2-3/16""OD x 3/4"" overall. Includes one pair of pole sockets and two No.8 x 3/4"" Phillips flat head screws."
|
Can be used as a support or brace. Strengths exceed ANSI/BHMA standards. Brackets are designed for use with standard dimensional lumber. First measurement indicates nominal width of shelf leg, second measurement denotes nominal length of wall leg. Bulk pack.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
The ProSource shelf bracket dimensions are 1/16 in W x 2-3/8 in H x selected depth. Suitable to use with ProSource shelving. The UPC is tagged.
|
National Hardware V107 Pole Socket Set, Polypropylene, White, Suitable for: Up to 1-3/8 in Dia Pole, Includes: Fasteners
|
The U 10165 is a shelf support peg, with a 5 mm diameter. Steel plated construction, used by many cabinet manufacturers. 25 lb maximum safe load per peg.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
1-3/8 in Dia with single screw mounting. Includes two pieces of-3/4 in screws and pole sockets.
|
Fits up to 1-3/8 in Dia closet poles. Includes one pair of pole sockets and screws.
|
Fits up to 1-3/8 in Dia closet poles. Reinforced design allows for interior and exterior uses. Single screw mounting. Includes one pair of pole sockets and screws.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Single track adjustable wall standard. Dimensions of 5/8 in W x 24 in H x selected length. For use with ProSource shelving. UPC tagged.
|
ClosetMaid Support Bracket, 12 in Length, 2 in Width, 2 in Height, White, Steel
|
Pilasters for built-in shelving and book case applications. Adjustable on 1/2 in centers. 23 ga high-strength steel with a dimension of 5/8 in W x 3/16 in D.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
The U 10156 is a plastic shelf support peg with a 3 mm diameter steel peg, to provide extra strength when needed. Used by many cabinet manufacturers. 10 lb maximum safe load per peg.
|
ClosetMaid Shelf End Cap, Dimensions: 1/4 in Dia x 0.4 in D, Plastic, White, Suitable for: ClosetMaid Shelf and Rod Shelving, Includes: (10) Small End Caps and (4) Large End Caps
|
Use for mounting 1 in wood or steel closet poles. Satin brass color.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
The U 10166 is a shelf support peg, with a 1/4 in Dia. Steel plated construction, used by many cabinet manufacturers. 25 lb maximum safe load per peg.
|
SuperSlide? shelving and hardware allows hangers to slide freely on both fixed-mount and ShelfTrack mounting systems. The heavy-duty preloaded bracket with anchor easily mounts to the wall and holds the end of the SuperSlide? shelf and hang rod.
|
Allows installation of 2 shelf and rod brackets to the wall and 1 shelf to the brackets. Four 1-1/2 in pan head screws for mounting brackets to the wall. Four 3/4 in pan head screws for mounting shelf to the brackets. For best use install in wall studs. For use with 108 shelf and rod bracket.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
1-3/8 in Dia with single screw mounting. Includes two pieces of-3/4 in screws and pole sockets.
|
For use with cabinets and storage cabinets with glass shelves.
|
The U 10163 is a shelf support peg, with a 1/4 in Dia. Steel plated construction, used by many cabinet manufacturers. 25 lb maximum safe load per peg.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Prime-Line Shelf Support Peg, Load Rating: 5 lb, Peg Diameter: 5 mm, Peg Length: 3/8 in, Plastic, Mill, Clear
|
White plastic, packaged on pegable card.
|
U 10136 is a shelf support peg with a 1/4 in Dia. Plastic construction and used by many cabinet manufacturers. The 5 lb maximum safe load per peg.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
SuperSlide? shelving and hardware allows hangers to slide freely on both fixed-mount and ShelfTrack? mounting systems.
|
Fits up to 1-3/8 in Dia closet pole or 1 in Dia pipe. Hardwood construction for maximum strength, extra deep holes for dropout prevention. Screws for each part included to make mounting quick, easy and strong. Includes one pair of pole sockets.
|
For use with the 80 Series standards. For shelving applications in light industrial, commercial and residential use. Standards can be mounted to nearly any type of wall. For storage and display applications in retail stores, grocery stores, light warehouses, repair garages, maintenance storage, business office storage and residential storage. Reinforced brackets lock into slotted standards for strong, secure weight-bearing support. Fully adjustable in 1 in increments. 16 ga cold rolled steel construction. Tested to meet or exceed ANSI performance standards as established by BHMA.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
The ClosetMaid? traditional fixed mount system is the original, economical way to install ventilated wire shelving. Wall clip attaches to the back of shelving to anchor shelf to the wall.
|
For use with the 80 Series standards. For shelving applications in light industrial, commercial and residential use. Standards can be mounted to nearly any type of wall. For storage and display applications in retail stores, grocery stores, light warehouses, repair garages, maintenance storage, business office storage and residential storage. Reinforced brackets lock into slotted standards for strong, secure weight-bearing support. Fully adjustable in 1 in increments. 16 ga cold rolled steel construction. Tested to meet or exceed ANSI performance standards as established by BHMA.
|
For use with the 80 Series standards. For shelving applications in light industrial, commercial and residential use. Standards can be mounted to nearly any type of wall. For storage and display applications in retail stores, grocery stores, light warehouses, repair garages, maintenance storage, business office storage and residential storage. Reinforced brackets lock into slotted standards for strong, secure weight-bearing support. Fully adjustable in 1 in increments. 16 ga cold rolled steel construction. Tested to meet or exceed ANSI performance standards as established by BHMA.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
For use with the 80 Series standards. For shelving applications in light industrial, commercial and residential use. Standards can be mounted to nearly any type of wall. For storage and display applications in retail stores, grocery stores, light warehouses, repair garages, maintenance storage, business office storage and residential storage. Reinforced brackets lock into slotted standards for strong, secure weight-bearing support. Fully adjustable in 1 in increments. 16 ga cold rolled steel construction. Tested to meet or exceed ANSI performance standards as established by BHMA.
|
N 6794 is a set of machined hardwood closet pole sockets. They fit the standard 1-3/8 in closet pole. They have a natural finish and can be stained or painted if desired. There are two hardwood sockets and fasteners included in the package.
|
Pilasters for built-in shelving and book case applications. Adjustable on 1/2 in centers. 23 ga high-strength steel with a dimension of 5/8 in W x 3/16 in D.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Pilasters for built-in shelving and book case applications. Adjustable on 1/2 in centers. 23 ga high-strength steel with a dimension of 5/8 in W x 3/16 in D.
|
Use to join two shelves together to create a continuous run of shelving.
|
ClosetMaid Shelving Support Bracket, 16 in L, 2 in W, 2 in H, Steel, Epoxy-Coated
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
For use with the 80 Series standards. For shelving applications in light industrial, commercial and residential use. Standards can be mounted to nearly any type of wall. For storage and display applications in retail stores, grocery stores, light warehouses, repair garages, maintenance storage, business office storage and residential storage. Reinforced brackets lock into slotted standards for strong, secure weight-bearing support. Fully adjustable in 1 in increments. 16 ga cold rolled steel construction. Tested to meet or exceed ANSI performance standards as established by BHMA.
|
For use with the 80 Series standards. For shelving applications in light industrial, commercial and residential use. Standards can be mounted to nearly any type of wall. For storage and display applications in retail stores, grocery stores, light warehouses, repair garages, maintenance storage, business office storage and residential storage. Reinforced brackets lock into slotted standards for strong, secure weight-bearing support. Fully adjustable in 1 in increments. 16 ga cold rolled steel construction. Tested to meet or exceed ANSI performance standards as established by BHMA.
|
For use with the 80 Series standards. For shelving applications in light industrial, commercial and residential use. Standards can be mounted to nearly any type of wall. For storage and display applications in retail stores, grocery stores, light warehouses, repair garages, maintenance storage, business office storage and residential storage. Reinforced brackets lock into slotted standards for strong, secure weight-bearing support. Fully adjustable in 1 in increments. 16 ga cold rolled steel construction. Tested to meet or exceed ANSI performance standards as established by BHMA.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
For use with the 80 Series standards. For shelving applications in light industrial, commercial and residential use. Standards can be mounted to nearly any type of wall. For storage and display applications in retail stores, grocery stores, light warehouses, repair garages, maintenance storage, business office storage and residential storage. Reinforced brackets lock into slotted standards for strong, secure weight-bearing support. Fully adjustable in 1 in increments. 16 ga cold rolled steel construction. Tested to meet or exceed ANSI performance standards as established by BHMA.
|
For use with the 80 Series standards. For shelving applications in light industrial, commercial and residential use. Standards can be mounted to nearly any type of wall. For storage and display applications in retail stores, grocery stores, light warehouses, repair garages, maintenance storage, business office storage and residential storage. Reinforced brackets lock into slotted standards for strong, secure weight-bearing support. Fully adjustable in 1 in increments. 16 ga cold rolled steel construction. Tested to meet or exceed ANSI performance standards as established by BHMA.
|
National Hardware V103 Pole Socket Set, Dimensions: 1-3/8 in Dia, Wood, Natural, Suitable for: Up to 1-3/8 in Dia Pole, Includes: Fasteners
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Pilasters for built-in shelving and book case applications. Adjustable on 1/2 in centers. 23 ga high-strength steel with a dimension of 5/8 in W x 3/16 in D.
|
Single track adjustable wall standard. Dimensions of 5/8 in W x 36 in H x selected length. For use with ProSource shelving. UPC tagged.
|
National Hardware Shelf and Rod Bracket, 125 lb Weight, 12.74 in Length, 9.31 in Width, 0.84 in Height, White, Steel
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
The ProSource shelf support is ideal for shelf support in cabinetry and furniture. Made of steel and zinc. Dimensions: 1/4 in H x 9 in L x 3 in W.
|
The ClosetMaid? traditional fixed-mount system is the original, economical way to install ventilated wire shelving. Wall clip attaches to the back of shelving to anchor shelf to the wall.
|
For use with the 80 Series standards. For shelving applications in light industrial, commercial and residential use. Standards can be mounted to nearly any type of wall. For storage and display applications in retail stores, grocery stores, light warehouses, repair garages, maintenance storage, business office storage and residential storage. Reinforced brackets lock into slotted standards for strong, secure weight-bearing support. Fully adjustable in 1 in increments. 16 ga cold rolled steel construction. Tested to meet or exceed ANSI performance standards as established by BHMA.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
For use with the 80 Series standards. For shelving applications in light industrial, commercial and residential use. Standards can be mounted to nearly any type of wall. For storage and display applications in retail stores, grocery stores, light warehouses, repair garages, maintenance storage, business office storage and residential storage. Reinforced brackets lock into slotted standards for strong, secure weight-bearing support. Fully adjustable in 1 in increments. 16 ga cold rolled steel construction. Tested to meet or exceed ANSI performance standards as established by BHMA.
|
For use with the 80 Series standards. For shelving applications in light industrial, commercial and residential use. Standards can be mounted to nearly any type of wall. For storage and display applications in retail stores, grocery stores, light warehouses, repair garages, maintenance storage, business office storage and residential storage. Reinforced brackets lock into slotted standards for strong, secure weight-bearing support. Fully adjustable in 1 in increments. 16 ga cold rolled steel construction. Tested to meet or exceed ANSI performance standards as established by BHMA.
|
For use with the 80 Series standards. For shelving applications in light industrial, commercial and residential use. Standards can be mounted to nearly any type of wall. For storage and display applications in retail stores, grocery stores, light warehouses, repair garages, maintenance storage, business office storage and residential storage. Reinforced brackets lock into slotted standards for strong, secure weight-bearing support. Fully adjustable in 1 in increments. 16 ga cold rolled steel construction. Tested to meet or exceed ANSI performance standards as established by BHMA.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
For use with the 80 Series standards. For shelving applications in light industrial, commercial and residential use. Standards can be mounted to nearly any type of wall. For storage and display applications in retail stores, grocery stores, light warehouses, repair garages, maintenance storage, business office storage and residential storage. Reinforced brackets lock into slotted standards for strong, secure weight-bearing support. Fully adjustable in 1 in increments. 16 ga cold rolled steel construction. Tested to meet or exceed ANSI performance standards as established by BHMA.
|
Heavy-duty preloaded bracket with anchor easily mounts to the wall and holds the end of any size ClosetMaid? shelf. Provides side wall support. Supports front lip of shelving where it meets the side wall. For drywall installations. Measures 2-7/8 in H x 2-1/8 in W x 1-3/4 in D. Made from resin.
|
Features twice the slots for more strength. Two 10-1/2 in brackets mounted to twin-slotted standards support up to 300 lb per shelf when installed according to manufacturer's directions.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
For use with the 180 series brackets. Standards can be mounted to nearly any type of wall. Reinforced brackets lock into slotted standard for strong, secure weight bearing support. Fully adjustable 1 in increments. 16 ga steel construction. Dimensions of 5/8 in W x 13/32 in H x selected length.
|
Made of heavy-duty steel covered with high-impact plastic. Italian design. Functional and attractive.
|
Screws are 1-1/2 in long with a #8 body and #6 head.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Screws are 1-1/2 in long with a #8 body and #6 head.
|
Fits up to 1-3/8 in Dia closet pole or 1 in Dia pipe. Hardwood construction for maximum strength, extra deep holes for dropout prevention. Screws for each part included to make mounting quick, easy and strong. Made from linden wood. Includes one pair of pole sockets.
|
For use with the 80 Series standards. For shelving applications in light industrial, commercial and residential use. Standards can be mounted to nearly any type of wall. For storage and display applications in retail stores, grocery stores, light warehouses, repair garages, maintenance storage, business office storage and residential storage. Reinforced brackets lock into slotted standards for strong, secure weight-bearing support. Fully adjustable in 1 in increments. 16 ga cold rolled steel construction. Tested to meet or exceed ANSI performance standards as established by BHMA.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
For use with the 80 Series standards. For shelving applications in light industrial, commercial and residential use. Standards can be mounted to nearly any type of wall. For storage and display applications in retail stores, grocery stores, light warehouses, repair garages, maintenance storage, business office storage and residential storage. Reinforced brackets lock into slotted standards for strong, secure weight-bearing support. Fully adjustable in 1 in increments. 16 ga cold rolled steel construction. Tested to meet or exceed ANSI performance standards as established by BHMA.
|
Snaps securely into place. For use with #233 and #255. High-strength steel construction.
|
ClosetMaid Support Bracket, White, Steel, Includes: (1) #8 Pin, (1) Anchor
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Converts shelf and rod shelving, 12 in and 16 in deep, to a continuous slide. Just add the brackets and choose your length of ClosetMaid? hang rod. Hang rod snaps into bracket to create an continuous slide for hangers.
|
Double-lug bracket design prevents shelves and contents from falling when bumped. Supports adjust to accommodate changes in storage and layout. Rounded corners and recessed groove design. Cover strips conceal screw holes and slots for a more refined appearance. Epoxy finish is resistant to chips and scratches.
|
The ProSource shelf bracket is made from a heavy duty steel construction.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Holds up to 500 lb per pair. For 12 in deep shelf.
|
Pilasters for built-in shelving and book case applications. Adjustable on 1/2 in centers. 23 ga high-strength steel with a dimension of 5/8 in W x 3/16 in D.
|
Double-lug bracket design prevents shelves and contents from falling when bumped. Supports adjust to accommodate changes in storage and layout. Rounded corners and recessed groove design. Cover strips conceal screw holes and slots for a more refined appearance. Epoxy finish is resistant to chips and scratches.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Double-lug bracket design prevents shelves and contents from falling when bumped. Supports adjust to accommodate changes in storage and layout. Rounded corners and recessed groove design. Cover strips conceal screw holes and slots for a more refined appearance. Epoxy finish is resistant to chips and scratches.
|
National Hardware Pole Socket Set, Steel, Brass, Includes: (2) Socket, Fasteners
|
Pilasters for built-in shelving and book case applications. Adjustable on 1/2 in centers. 23 ga high-strength steel with a dimension of 5/8 in W x 3/16 in D.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Double-lug bracket design prevents shelves and contents from falling when bumped. Supports adjust to accommodate changes in storage and layout. Rounded corners and recessed groove design. Cover strips conceal screw holes and slots for a more refined appearance. Epoxy finish is resistant to chips and scratches.
|
Double-lug bracket design prevents shelves and contents from falling when bumped. Supports adjust to accommodate changes in storage and layout. Rounded corners and recessed groove design. Cover strips conceal screw holes and slots for a more refined appearance. Epoxy finish is resistant to chips and scratches.
|
Comes with 1/4 in Dia x 7/16 in L pin. Polybagged.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Heavy-duty preloaded bracket with anchor easily mounts to the wall and holds the end of any size ClosetMaid? shelf. Provides side wall support. Supports front lip of shelving where it meets the side wall. For drywall installations. Measures 2-7/8 in H x 2-1/8 in W x 1-3/4 in D. Made from resin.
|
Double-lug bracket design prevents shelves and contents from falling when bumped. Supports adjust to accommodate changes in storage and layout. Rounded corners and recessed groove design. Cover strips conceal screw holes and slots for a more refined appearance. Epoxy finish is resistant to chips and scratches.
|
Pilasters for built-in shelving and book case applications. Adjustable on 1/2 in centers. 23 ga high-strength steel with a dimension of 5/8 in W x 3/16 in D.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Pilasters for built-in shelving and book case applications. Adjustable on 1/2 in centers. 23 ga high-strength steel with a dimension of 5/8 in W x 3/16 in D.
|
Pilasters for built-in shelving and book case applications. Adjustable on 1/2 in centers. 23 ga high-strength steel with a dimension of 5/8 in W x 3/16 in D.
|
Double-lug bracket design prevents shelves and contents from falling when bumped. Supports adjust to accommodate changes in storage and layout. Rounded corners and recessed groove design. Cover strips conceal screw holes and slots for a more refined appearance. Epoxy finish is resistant to chips and scratches.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Single track adjustable wall standard. Dimensions of 5/8 in W x 48 in H x selected length. For use with ProSource shelving. UPC tagged.
|
Ideal for shelves 11 to 18 in deep and rods up to 1-3/8 in Dia, this heavy-duty fixed shelf/rod bracket for home closets features a 2-1/2 in hook and holds up to 300 lb per pair. White finish.
|
For wire shelving, converts almost any wire shelf to a shoe shelf. Make a shoe shelf by inverting shelf, lip facing up. Holds shoes away from wall at an angle. Use 1 shoe support bracket every 24 in. Does not work with Close Mesh shelving. Measures 6-1/8 in H x 1-1/4 in W x 4-3/4 in D.
|
|
|
Headquarters Palm City, Jensen Beach, Stuart