|
|
|
|
|
|
|
|
|
|
|
Midwest Products Sheet, Basswood, 36 in L, 3 in W, 1/16 in Thick
|
Cloverdale Replacement Single Bevel Edge Trimmer Blade, Dimensions: 1/64 x 3/4 x 1-3/4 in, Suitable for: 33437 Edge Trimmer
|
Fasade Backsplash Inside Corner Trim, PVC, White, Matte, 18 in L, Suitable for: Backsplash Panels
|
|
|
|
|
|
|
|
|
|
|
|
|
Fasade J-Trim, PVC, White, Matte, 18 in L
|
Appearance-grade, southern yellow pine. MCA treatment, above ground contact.
|
Midwest Products Sheet, Basswood, 36 in L, 3 in W, 1/8 in Thick
|
|
|
|
|
|
|
|
|
|
|
|
|
Midwest Products Sheet, Basswood, 36 in L, 3 in W, 3/32 in Thick
|
No mitering decorative blocks. Installs with a hammer and finishing nails. Pine wood.
|
No mitering decorative blocks. Installs with a hammer and finishing nails. Pine wood.
|
|
|
|
|
|
|
|
|
|
|
|
|
No mitering decorative blocks. Installs with a hammer and finishing nails. Pine wood.
|
No mitering decorative blocks. Installs with a hammer and finishing nails. Pine wood.
|
Midwest Products Basswood Sheet, 36 in L, 4 in W, 1/8 in Thick
|
|
|
|
|
|
|
|
|
|
|
|
|
Palclad wall and ceiling liner panels are ideally suited for both industrial and residential interior applications. These waterproof panels are lightweight, have an attractive surface texture, absorb scratches and clean up very easily. Palclad is a cost-effective alternative to traditional FRP panels. Manufactured from 100% recycled content.
|
WallTuf Inside Corner Moulding, Inside Corner, Vinyl, White, 8 ft L
|
WallTuf Divider Moulding, White, Vinyl, 8 ft Actual Length
|
|
|
|
|
|
|
|
|
|
|
|
|
WallTuf End Cap Moulding, Vinyl, White, 8 ft L, Suitable for: WallTuf Liner Panels
|
No mitering decorative blocks. Installs with a hammer and finishing nails. Pine wood.
|
No mitering decorative blocks. Installs with a hammer and finishing nails. Pine wood.
|
|
|
|
|
|
|
|
|
|
|
|
|
No mitering decorative blocks. Installs with a hammer and finishing nails. Pine wood.
|
ALEXANDRIA Moulding Common Board, 1 in Nominal Thickness, 4 in Width, 4 ft Length
|
Used under Sun-n-Rain panels on each cross support or purlin. Provides support for fasteners when attaching panels to framing. Custom profile matches pitch and depth of panel corrugation.
|
|
|
|
|
|
|
|
|
|
|
|
|
Used under Suntuf? panels on each cross support or purlin. Provides support for fasteners when attaching panels to framing. Custom profile matches pitch and depth of panel corrugation.
|
Used under Palruf? or Suntop panels on each cross support or purlin. Provides support for fasteners when attaching panels to framing. Custom profile matches pitch and depth of panel corrugation.
|
Use under Palram's corrugated panels to close off vertical edges for a finished look.
|
|
|
|
|
|
|
|
|
|
|
|
|
No mitering decorative blocks. Installs with a hammer and finishing nails. Pine wood.
|
Appearance-grade, white pine. MCA treatment, above ground contact.
|
Appearance-grade, white pine. MCA treatment, above ground contact. Accommodates 4 x 4 in post.
|
|
|
|
|
|
|
|
|
|
|
|
|
Appearance-grade, white pine. MCA treatment, above ground contact.
|
Appearance-grade, white pine. MCA treatment, above ground contact.
|
Appearance-grade, white pine. MCA treatment, above ground contact.
|
|
|
|
|
|
|
|
|
|
|
|
|
Woodtite 1 in screw (sku 940.4302) with EPDM washer is used to fasten PVC, Sun-n-Rain and Palruf or Polycarbonate, Suntop and Suntuf, corrugated panels in a siding or cladding application and Woodtite 2 in screw (sku 171.0235) also with EPDM washer is used to crown fasten PVC, Sun-n-Rain and Palruf or Polycarbonate, Suntop and Suntuf, corrugated panels in a roofing application.
|
Appearance-grade, white pine. MCA treatment, above ground contact.
|
Used under Suntuf? panels on each cross support or purlin. Provides support for fasteners when attaching panels to framing. Custom profile matches pitch and depth of panel corrugation.
|
|
|
|
|
|
|
|
|
|
|
|
|
No mitering decorative blocks. Installs with a hammer and finishing nails. Pine wood.
|
Use on desktop, antique, shelving cabinets, crafts, hobbies and more. Pre-sanded and ready to finish. Trims with edge trimmer or utility knife. Paper backed with a resin-impregnated paper that prevents splitting. Furniture-grade, pre-sanded and ready to finish as desired with preheated (400 deg) iron, press length of edging till glue has melted if mistake in application is made, simply reheat and re-apply. Allow edging to cool completely before finishing other pieces.
|
Use on desktop, antique, shelving cabinets, crafts, hobbies and more. Pre-sanded and ready to finish. Trims with edge trimmer or utility knife. Paper backed with a resin-impregnated paper that prevents splitting. Furniture-grade, pre-sanded and ready to finish as desired with preheated (400 deg) iron, press length of edging till glue has melted if mistake in application is made, simply reheat and re-apply. Allow edging to cool completely before finishing other pieces.
|
|
|
|
|
|
|
|
|
|
|
|
|
Sanded on four sides.
|
Do-it-yourself peel and stick tiles are lightweight, easy to handle, cut and maintain. Sticks without adding extra glue, does not yellow or crack with time. Can be installed in minutes over a clean and smooth surface without any mess or specialized tools. Designed for kitchen and bathroom environments, the tiles are resistant to the heat of stovetops and the humidity of bathrooms. Tiles can be cut to size with a razor blade and a straight edge or a sharp pair of scissors.
|
Do-it-yourself peel and stick tiles are lightweight, easy to handle, cut and maintain. Sticks without adding extra glue, does not yellow or crack with time. Can be installed in minutes over a clean and smooth surface without any mess or specialized tools. Designed for kitchen and bathroom environments, the tiles are resistant to the heat of stovetops and the humidity of bathrooms. Tiles can be cut to size with a razor blade and a straight edge or a sharp pair of scissors.
|
|
|
|
|
|
|
|
|
|
|
|
|
Appearance-grade, white pine. MCA treatment, above ground contact.
|
Use on desktop, antique, shelving cabinets, crafts, hobbies and more. Applies to wood, plywood particle board, hardboard, metal and more. Prefinished and colorfast. Heat and stain-resistant, washable and static-free. Flexible and durable (not recommended for surface subject to sharp tools). Trims with edge trimmer or utility knife. Cut edge 1/2 in longer than surface to be covered with preheat (400 deg) iron, press length of edging till glue has melted while still hot, press edging down firmly with wood block or re-apply. Carded.
|
Fasade inside corner trim pieces allow you to finish the corners of panels in a matching finish. The trims are easy to install and add a professional touch to any project. Simply cut with scissors or utility knife.
|
|
|
|
|
|
|
|
|
|
|
|
|
Basswood is ideal for almost any project that requires wood and can be painted or stained to represent any wood type. Bag contains 72 cu-in.
|
No mitering decorative blocks. Installs with a hammer and finishing nails. Oak wood.
|
Self-drilling tapping screws for fastening polycarbonate and PVC directly to aluminum and steel supporting members. Hex-head with weatherseal washer.
|
|
|
|
|
|
|
|
|
|
|
|
|
No mitering decorative blocks. Installs with a hammer and finishing nails. Pine wood.
|
ALEXANDRIA Moulding Stud, Wood, 8 in Length, 4 in Width, 2 in Thickness
|
ALEXANDRIA Moulding Common Board, 1 in Nominal Thickness, 4 in Width, 8 ft Length
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Selected for appearance, grade, southern yellow pine MCA treatment, above ground contact.
|
Use on desktop, antique, shelving cabinets, crafts, hobbies and more. Pre-sanded and ready to finish. Trims with edge trimmer or utility knife. Paper backed with a resin-impregnated paper that prevents splitting. Furniture-grade, pre-sanded and ready to finish as desired with preheated (400 deg) iron, press length of edging till glue has melted if mistake in application is made, simply reheat and re-apply. Allow edging to cool completely before finishing other pieces.
|
|
|
|
|
|
|
|
|
|
|
|
|
Use on desktop, antique, shelving cabinets, crafts, hobbies and more. Pre-sanded and ready to finish. Trims with edge trimmer or utility knife. Paper backed with a resin-impregnated paper that prevents splitting. Furniture-grade, pre-sanded and ready to finish as desired with preheated (400 deg) iron, press length of edging till glue has melted if mistake in application is made, simply reheat and re-apply. Allow edging to cool completely before finishing other pieces.
|
Pine treated with Osomose weather shield (inhibits checking and cracking).
|
Surface mount for light fixture. Decoratively provides a level and waterproof surface for all exterior fixtures. Durable, maintenance-free, UV stabilized and constructed with color molded so they won't scratch, flake or fade. The patented snap-on trim ring makes installation easy. Fits all type of siding. 6-7/10 x 6-7/10 in.
|
|
|
|
|
|
|
|
|
|
|
|
|
ALEXANDRIA Moulding Round Plywood, 3/4 in Actual Thickness, 11-3/4 in Actual Width
|
No mitering decorative blocks. Installs with a hammer and finishing nails. Oak wood.
|
No mitering decorative blocks. Installs with a hammer and finishing nails. Pine wood.
|
|
|
|
|
|
|
|
|
|
|
|
|
UFP Moulded Handrail, 6 ft L, 4 ft W, 2 ft Thick
|
Cleanly cuts in both directions. Compact size. Provides exacting control for flush trimming wood veneer, melamine, PVC and polyester edgebanding. Measures 3 in x 2-1/4 in x 1 in.
|
Rivets can be used in conjunction with adhesive when attaching Palclad panels to a substrate. 50/BG.
|
|
|
|
|
|
|
|
|
|
|
|
|
Used for installing short wire connections and hose bibs. Decoratively provides a level and waterproof surface for all exterior fixtures. Durable, maintenance-free, UV stabilized and constructed with color molded so they won't scratch, flake or fade. The patented snap-on trim ring makes installation easy. ID 3 in x 4-3/4 in. OD 4-1/2 in x 6-5/16 in.
|
Pine treated with Osomose weather shield (inhibits checking and cracking).
|
Decoratively provides a level and waterproof surface for all exterior fixtures. Durable, maintenance-free, UV stabilized and constructed with color molded so they won't scratch, flake or fade. The patented snap-on trim ring makes installation easy. 5 x 6 in ID. 7 x 8 in OD.
|
|
|
|
|
|
|
|
|
|
|
|
|
Sanded on four sides.
|
Decoratively provides a level and waterproof surface for all exterior fixtures. Durable, maintenance-free, UV stabilized and constructed with color molded so they won't scratch, flake or fade. The patented snap-on trim ring makes installation easy; fits around existing pipes, wires and more. 3 x 4-3/4 in ID. 5 x 6-3/4 in OD.
|
Fasade J-trims add a professional touch to your project. Just cut with scissors or utility knife and attach to any cut edge.
|
|
|
|
|
|
|
|
|
|
|
|
|
Fasade inside corner trim pieces allow you to finish the corners of panels in a matching finish. The trims are easy to install and add a professional touch to any project. Simply cut with scissors or utility knife.
|
Fasade J-trims add a professional touch to your project. Just cut with scissors or utility knife and attach to any cut edge.
|
Selected for appearance, grade, southern yellow pine MCA treatment, above ground contact.
|
|
|
|
|
|
|
|
|
|
|
|
|
ALEXANDRIA Moulding Rectangular Plywood, 1/4 in Actual Thickness, 2 in Actual Width, 4 ft Actual Length, B-C Grade
|
Has a close and tight homogeneous grain structure that makes it ideal for a wide variety of hobby, craft and miniature projects. May be painted or stained to represent any wood type. Great finishing qualities. Strong and lightweight.
|
Sanded on four sides.
|
|
|
|
|
|
|
|
|
|
|
|
|
ALEXANDRIA Moulding Stud, Wood, 8 in Length, 3 in Width, 2 in Thickness
|
ALEXANDRIA Moulding Common Board, 1 in Nominal Thickness, 6 in Width, 8 ft Length
|
UFP Stair Stringer, Number of Steps: 3, Rise Size: 6-3/4 in, Run Size: 10 in, Wood, Treated, Yellow, 35.64 in L, 11-1/4 in W, Suitable for: Ground Contact
|
|
|
|
|
|
|
|
|
|
|
|
|
ALEXANDRIA Moulding Stud, Wood, 8 in Length, 4 in Width, 2 in Thickness
|
Tops are cut off at an angle.
|
White hardwood boards.
|
|
|
|
|
|
|
|
|
|
|
|
|
Deckorators Pressure Treated Post Cap, Press-On, Flat Top, 5-5/8 in Length, 5-5/8 in Width, Pine Wood, Suitable for: 6 x 6 in Wood Posts
|
ALEXANDRIA Moulding Stud, Wood, 8 in Length, 6 in Width, 2 in Thickness
|
No mitering decorative blocks. Installs with a hammer and finishing nails. Pine wood.
|
|
|
|
|
|
|
|
|
|
|
|
|
Used installing larger coach lamps and smaller electrical and water meters. Decoratively provides a level and waterproof surface for all exterior fixtures. Durable, maintenance-free, UV stabilized and constructed with color molded so they won't scratch, flake or fade. The patented snap-on trim ring makes installation easy. ID 6 in x 10 in. OD 8-1/8 in x 12 in.
|
ALEXANDRIA Moulding Standard Perforated Hardboard, Plywood, 4 ft Overall Width, 4 ft Overall Height, 3/16 in Overall Depth
|
Palram Americas Side Wall Connector Flashing, Plastic, 4 ft 2 in L, 8 in W, Suitable for: Suntuf Corrugated Poly Panels
|
|
|
|
|
|
|
|
|
|
|
|
|
UFP Stair Stringer, Number of Steps: 4, Rise Size: 6-3/4 in, Run Size: 10 in, Wood, Treated, Yellow, 47.71 in L, 11-1/4 in W, Suitable for: Ground Contact
|
ALEXANDRIA Moulding Common Board, 1 in Nominal Thickness, 8 in Width, 8 ft Length
|
Use on desktop, antique, shelving cabinets, crafts, hobbies and more. Applies to wood, plywood particle board, hardboard, metal and more. Prefinished and colorfast. Heat and stain-resistant, washable and static-free. Flexible and durable (not recommended for surface subject to sharp tools). Trims with edge trimmer or utility knife. Cut edge 1/2 in longer than surface to be covered with preheat (400 deg) iron, press until glue has melted and press down.
|
|
|
|
|
|
|
|
|
|
|
|
|
ALEXANDRIA Moulding Round Plywood, 3/4 in Actual Thickness, 17-3/4 in Actual Length
|
ALEXANDRIA Moulding Sanded Rectangular Plywood, 1/2 in Actual Thickness, 2 ft Actual Width, 4 ft Actual Length, B-C Grade
|
Pre-sanded and ready to finish, backed with a resin impregnated paper that prevents splitting. Apply to wood, plywood, particle board, hardboard and metal. Apply with contact cement.
|
|