|
|
|
|
|
|
|
|
|
|
|
|
|
|
Lomanco End Plug, Foam/Polyethylene
|
One-piece white polyethylene. Recommended for moisture control in sidewalls construction or other restricted areas.
|
We use a minimum of 0.02 ga aluminum for our round aluminum louvers, screens and plugs - most manufacturers use a thinner gauge, which leads to a weaker product. This thick, durable material maximizes lifespan and ensures proper ventilation needs.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
High-impact resin construction, all-purpose intake ventilation. Snap-in for easy installation with 5/16 in soffit material. 22 sq-in. NFA.
|
We use a minimum of 0.02 ga aluminum for our round aluminum louvers, screens and plugs - most manufacturers use a thinner gauge, which leads to a weaker product. This thick, durable material maximizes lifespan and ensures proper ventilation needs.
|
We use a minimum of 0.02 ga aluminum for our round aluminum louvers, screens and plugs, most manufacturers use a thinner gauge, which leads to a weaker product. This thick, durable material maximizes lifespan and ensures proper ventilation needs.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
We use a minimum of 0.02 ga aluminum for our round aluminum louvers, screens and plugs, most manufacturers use a thinner gauge, which leads to a weaker product. This thick, durable material maximizes lifespan and ensures proper ventilation needs.
|
We use a minimum of 0.02 ga aluminum for our round aluminum louvers, screens and plugs, most manufacturers use a thinner gauge, which leads to a weaker product. This thick, durable material maximizes lifespan and ensures proper ventilation needs.
|
One-piece white polyethylene. Recommended for moisture control in sidewalls construction or other restricted areas.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
One-piece white polyethylene. Recommended for moisture control in sidewalls construction or other restricted areas.
|
We use a minimum of 0.02 ga aluminum for our round aluminum louvers, screens and plugs, most manufacturers use a thinner gauge, which leads to a weaker product. This thick, durable material maximizes lifespan and ensures proper ventilation needs.
|
Grill with a flange and (4) screws to hold it in the foundation opening, has no flap or slide mechanism to open or close it, so the air can constantly move through. Size of 7-3/4 in x 15-1/4 in so it easily fits the standard 8 in x 16 in block foundation opening.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Grill with a flange and (4) screws to hold it in the foundation opening, has no flap or slide mechanism to open or close it, so the air can constantly move through. Size of 7-3/4 in x 15-1/4 in so it easily fits the standard 8 in x 16 in block foundation opening.
|
Grill with a flange and (4) screws to hold it in the foundation opening, has no flap or slide mechanism to open or close it, so the air can constantly move through. Size of 7-3/4 in x 15-1/4 in so it easily fits the standard 8 in x 16 in block foundation opening.
|
We use a minimum of 0.02 ga aluminum for our round aluminum louvers, screens and plugs most manufacturers use a thinner gauge, which leads to a weaker product. This thick, durable material maximizes lifespan and ensures proper ventilation needs.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
We use a minimum of 0.02 ga aluminum for our round aluminum louvers, screens and plugs, most manufacturers use a thinner gauge, which leads to a weaker product. This thick, durable material maximizes lifespan and ensures proper ventilation needs.
|
We use a minimum of 0.02 ga aluminum for our round aluminum louvers, screens and plugs - most manufacturers use a thinner gauge, which leads to a weaker product. This thick, durable material maximizes lifespan and ensures proper ventilation needs.
|
We use a minimum of 0.02 ga aluminum for our round aluminum louvers, screens and plugs, most manufacturers use a thinner gauge, which leads to a weaker product. This thick, durable material maximizes lifespan and ensures proper ventilation needs.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
We use a minimum of 0.02 ga aluminum for our round aluminum louvers, screens and plugs - most manufacturers use a thinner gauge, which leads to a weaker product. This thick, durable material maximizes lifespan and ensures proper ventilation needs.
|
We use a minimum of 0.02 ga aluminum for our round aluminum louvers, screens and plugs, most manufacturers use a thinner gauge, which leads to a weaker product. This thick, durable material maximizes lifespan and ensures proper ventilation needs.
|
One-piece white polyethylene. Recommended for moisture control in sidewalls construction or other restricted areas.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
For King and Queen size brick. Fits 9-1/4 in x 16 in vent openings. 1-3/4 in frame depth and 8 in x 8 in sized mesh. Mesh is made of aluminum perma kote epoxy charcoal. Frame is made of high-density polypropylene resins. 9-1/4 in x 16 in.
|
For King and Queen size brick. Fits 9-1/4 in x 16 in vent openings. 1-3/4 in frame depth and 8 in x 8 in sized mesh. Mesh is made of aluminum perma kote epoxy charcoal. Frame is made of high-density polypropylene resins. 9-1/4 in x 16 in.
|
Witten Vent Foundation Vent, Rough Opening Size: 8 in L x 16 in W, Black Oxide
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
We use a minimum of 0.02 ga aluminum for our round aluminum louvers, screens and plugs - most manufacturers use a thinner gauge, which leads to a weaker product. This thick, durable material maximizes lifespan and ensures proper ventilation needs.
|
We use a minimum of 0.02 ga aluminum for our round aluminum louvers, screens and plugs, most manufacturers use a thinner gauge, which leads to a weaker product. This thick, durable material maximizes lifespan and ensures proper ventilation needs.
|
We use a minimum of 0.02 ga aluminum for our round aluminum louvers, screens and plugs, most manufacturers use a thinner gauge, which leads to a weaker product. This thick, durable material maximizes lifespan and ensures proper ventilation needs.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Witten Vent Foundation Vent, Rough Opening Size: 8 in L x 16 in W, Brown
|
Witten Vent Foundation Vent, Rough Opening Size: 8 in L x 16 in W, Gray
|
Low profile style. Molded in screen. Angled screen that prevents birds from nesting. Wide, flexible flange will not crack on installation, even in cold weather. Angled throat to effectively deflect water. Injection molded UV resistant polypropylene.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Polypropylene material. Ideal for steep pitched roofs. Low profile and a stair step screen to provide more airflow in a smaller vent. 17-1/2 in x 18-1/2 in flashing with 4.3 in H. 61 sq-in of net-free area. UV resistant polypropylene.
|
Polypropylene material. Ideal for steep pitched roofs. Low profile and a stair step screen to provide more airflow in a smaller vent. 17-1/2 in x 18-1/2 in flashing with 4.3 in H. 61 sq-in of net-free area. UV resistant polypropylene.
|
One-piece aluminum central louver panel construction with pre-punched louvered vanes. Designed for flush or recessed mounting.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
One-piece aluminum central louver panel construction with pre-punched louvered vanes. Designed for flush or recessed mounting.
|
No need to penetrate the roof or wall. For venting bathrooms or dryers. Flapper lets out hot moist air while keeping out cold air. Mounts flush to soffit for virtually invisible installation. Meets CSA codes and standards. Connects to either 4 in or 5 in ducting or flex hose. Overall size 6-3/4 in x 5-3/4 in.
|
One-piece aluminum central louver panel construction with pre-punched louvered vanes. Designed for flush or recessed mounting.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
A high-quality finish, thanks to the patented lock-on trim ring. Available with scalloped or square corner details & fits 4" exhaust pipe. Patented exhaust flaps stay closed when not in use.
|
With 18 in lintel for new construction. Fits standard 8 in x 16 in vent openings. High-density thermo-plastic construction. Automatically opens at 70 deg F, closes at 40 (approximately). Key working mechanism, bi-metal coil, fully enclosed by protective cover. No electrical hook-up required. Stainless steel and corrosion-resistant metal parts. 62 sq-in net-free area. Heavy-duty aluminum mesh screen, front and back. 8 in x 16 in.
|
One-piece aluminum central louver panel construction with pre-punched louvered vanes. Designed for flush or recessed mounting.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Galvanized steel construction. Replaces turbine heads during cold weather or severe weather conditions. No.WC12 Dade Country Approved 04-0618.01 when used with Master Flow base. No.WC12F Florida Building Code (FBC) Approved FL5027.
|
Replaces old-style manual vents. Fits standard 8 in x 16 in vent openings. Automatically opens at 70 deg F and closes at 40 (approximately). The key mechanism, bi-metal coil, fully enclosed in protective cover. Stainless steel compression spring with 1 adjustable screw for easy installation. 65 sq-in net-free area. High-density thermo-plastic construction. Stainless steel and corrosion-resistant metal parts. Heavy-duty aluminum mesh screen, front and back. No electrical hook-up required. 8 in x 16 in.
|
Replaces old-style manual vents. Fits standard 8 in x 16 in vent openings. Automatically opens at 70 deg F and closes at 40 (approximately). The key mechanism, bi-metal coil, fully enclosed in protective cover. Stainless steel compression spring with 1 adjustable screw for easy installation. 65 sq-in net-free area. High-density thermo-plastic construction. Stainless steel and corrosion-resistant metal parts. Heavy-duty aluminum mesh screen, front and back. No electrical hook-up required. 8 in x 16 in.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Builders Edge Hooded Ventilator, Net Free Ventilating Area: 12 sq-in, Installation Type: Side Wall
|
With 18 in lintel for new construction. Fits standard 8 in x 16 in vent openings. High-density thermo-plastic construction. Automatically opens at 70 deg F, closes at 40 (approximately). Key working mechanism, bi-metal coil, fully enclosed by protective cover. No electrical hook-up required. Stainless steel and corrosion-resistant metal parts. 62 sq-in net-free area. Heavy-duty aluminum mesh screen, front and back. 8 in x 16 in.
|
Replaces old-style manual vents. Fits standard 8 in x 16 in vent openings. Automatically opens at 70 deg F and closes at 40 (approximately). The key mechanism, bi-metal coil, fully enclosed in protective cover. Stainless steel compression spring with 1 adjustable screw for easy installation. 65 sq-in net-free area. High-density thermo-plastic construction. Stainless steel and corrosion-resistant metal parts. Heavy-duty aluminum mesh screen, front and back. No electrical hook-up required. 8 in x 16 in.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Master Flow? foundation vents help to remove damaging moisture that can lead to mold growth and structural decay in the foundation area of the home.
|
With 18 in lintel for new construction. Fits standard 8 in x 16 in vent openings. High-density thermo-plastic construction. Automatically opens at 70 deg F, closes at 40 (approximately). Key working mechanism, bi-metal coil, fully enclosed by protective cover. No electrical hook-up required. Stainless steel and corrosion-resistant metal parts. 62 sq-in net-free area. Heavy-duty aluminum mesh screen, front and back. 8 in x 16 in.
|
Replaces old-style manual vents. Fits standard 8 in x 16 in vent openings. Automatically opens at 70 deg F and closes at 40 (approximately). The key mechanism, bi-metal coil, fully enclosed in protective cover. Stainless steel compression spring with 1 adjustable screw for easy installation. 65 sq-in net-free area. High-density thermo-plastic construction. Stainless steel and corrosion-resistant metal parts. Heavy-duty aluminum mesh screen, front and back. No electrical hook-up required. 8 in x 16 in.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
With 1 in W frame for new construction or to replace old foundation vents. Fits standard 8 in x 16 in concrete block opening. Operates automatically without electricity, opens at 70 deg F, closes at 40 (approximately). Simple homeowner/DIYer snap-in installation, with color matched set screws for additional stability. Removable back for maintenance and cleaning. Screened with 1/8 in heavy-duty aluminum mesh. High-density thermo-plastic construction. All metal parts are corrosion-resistant stainless steel. Aluminum louvers. No mortar required for installation. 62 sq-in net-free area. 8 in x 16 in.
|
With 1 in W frame for new construction or to replace old foundation vents. Fits standard 8 in x 16 in concrete block opening. Operates automatically without electricity, opens at 70 deg F, closes at 40 (approximately). Simple homeowner/DIYer snap-in installation, with color matched set screws for additional stability. Removable back for maintenance and cleaning. Screened with 1/8 in heavy-duty aluminum mesh. High-density thermo-plastic construction. All metal parts are corrosion-resistant stainless steel. Aluminum louvers. No mortar required for installation. 62 sq-in net-free area. 8 in x 16 in.
|
With 1 in W frame for new construction or to replace old foundation vents. Fits standard 8 in x 16 in concrete block opening. Operates automatically without electricity, opens at 70 deg F, closes at 40 (approximately). Simple homeowner/DIYer snap-in installation, with color matched set screws for additional stability. Removable back for maintenance and cleaning. Screened with 1/8 in heavy-duty aluminum mesh. High-density thermo-plastic construction. All metal parts are corrosion-resistant stainless steel. Aluminum louvers. No mortar required for installation. 62 sq-in net-free area. 8 in x 16 in.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
One-piece aluminum central louver panel construction with pre-punched louvered vanes. Designed for flush or recessed mounting.
|
For attic ventilation. 26 ga.
|
Witten Vent Foundation Vent, Aluminum
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
One-piece aluminum central louver panel construction with pre-punched louvered vanes. Designed for flush or recessed mounting.
|
Master Flow? foundation vents help to remove damaging moisture that can lead to mold growth and structural decay in the foundation area of the home.
|
One-piece aluminum central louver panel construction with pre-punched louvered vanes. Designed for flush or recessed mounting.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Use for venting bathroom and kitchen exhaust fans, not for use as dryer or furnace vent, durable, maintenance free, UV stabilized and constructed with color molded-through so they wont scratch, flake or fade, full fiberglass screening for complete insect protection, net-free area 12 sq-in. Lifetime limited warranty. Made in USA.
|
All aluminum, rust-free construction, overall size of 4 in x 16 in louver, 8 x 8 perma-coated aluminum screen attached, pre-drilled holes, unique eyebrow designed louvers provides maximum ventilating capacity with weather infiltration, 25 sq-in of net-free area.
|
One-piece aluminum central louver panel construction with pre-punched louvered vanes. Designed for flush or recessed mounting.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Automatic adjustable. Inline with vent. Outside arrow indicator for easy changes. Compatible with all single speed power vents. 4.4 A, 120 V, 60 Hz.
|
Ideal for appliances needing ventilation. Heavy-duty screen deters animals and insects, large flashing for added leak protection. Black.
|
Drip channel drains water to the front of the siding to eliminate wood rot. Wide trim ring, removable template, large flange, and level lines. Injection-molded UV resistant polypropylene for impact. Molded in screen prevents insects and bees from nesting in gable vent. Molded in screen cannot become unglued. Deep wood grain finish enhances appearance for a real wood look. Weeping holes prevent condensation or moisture from remaining trapped. Suitable for use with vinyl or aluminum siding, shake, stucco or brick. 44 sq. ins. of net free area.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Drip channel drains water to the front of the siding to eliminate wood rot. Wide trim ring, removable template, large flange and level lines. Injection-molded UV-resistant polypropylene. Molded in screen prevents insects and bees from nesting in gable vent. Molded in screen cannot become unglued. Deep wood grain finish enhances appearance for a real wood look. Weeping holes prevent condensation or moisture from remaining trapped. Suitable for use with vinyl or aluminum siding, shake, stucco or brick. 58 sq-in of net-free area. Includes a 3 in snap on trim ring for easy installation.
|
Drip channel drains water to the front of the siding to eliminate wood rot. Wide trim ring, removable template, large flange and level lines. Injection-molded UV-resistant polypropylene. Molded in screen prevents insects and bees from nesting in gable vent. Molded in screen cannot become unglued. Deep wood grain finish enhances appearance for a real wood look. Weeping holes prevent condensation or moisture from remaining trapped. Suitable for use with vinyl or aluminum siding, shake, stucco or brick. 55 sq-in of net-free area.
|
All aluminum, rust-free construction, overall size of 8 in x 16 in louver, 8 x 8 perma-coated aluminum screen attached, pre-drilled holes, unique eyebrow designed louvers provides maximum ventilating capacity with weather infiltration, 65 sq-in of net-free area.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Drip channel drains water to the front of the siding to eliminate wood rot. Wide trim ring, removable template, large flange and level lines. Injection-molded UV-resistant polypropylene for impact. Molded in screen prevents insects and bees from nesting in gable vent. Molded in screen cannot become unglued. Deep wood grain finish enhances appearance for a real wood look. Weeping holes prevent condensation or moisture from remaining trapped. Suitable for use with vinyl or aluminum siding, shake, stucco or brick. 44 sq-in of net-free area for 12 x 18 in and 18 x 24 in, 74 sq-in of net-free area for 22 x 28 in. Rough cut opening is 12-1/2 x 18-1/4 in.
|
One-piece aluminum central louver panel construction with pre-punched louvered vanes. Designed for flush or recessed mounting.
|
The Lomanco? Series 900 adjustable louversfit roof pitches of 2-1/2/12 to 9/12. The ingenious design actually forces the louver blades to pivot, changing angle as the unit is adjusted. This permits maximum air flow capacity while assuring optimum protection from the weather.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Drip channel drains water to the front of the siding to eliminate wood rot. Wide trim ring, removable template, large flange and level lines. Injection-molded UV-resistant polypropylene for impact. Molded in screen prevents insects and bees from nesting in gable vent. Molded in screen cannot become unglued. Deep wood grain finish enhances appearance for a real wood look. Weeping holes prevent condensation or moisture from remaining trapped. Suitable for use with vinyl or aluminum siding, shake, stucco or brick. 44 sq-in of net-free area for 12 x 18 in. Rough cut opening is 12-1/2 x 18-1/4 in.
|
For attic ventilation. 26 ga.
|
Wires parallel to thermostat, allows moisture-laden winter air to be discharged. Thermostat will operate unit during the summer months and in the winter months humistat will takeover. Settings for humidistat are minimum 80%, normal 42% and maximum 20 %. Fits 2000 series.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
All Lomanco? Whirlybird? turbines come with a lifetime transferable warranty. Simply put, you can't buy a better turbine. The turbine design features permanently lubricated upper and lower ball bearings that ensure long life and no maintenance. Other common features of the turbine are its rigid spider-type construction riveted at every connection and tested to withstand winds of 110 mph, 21 air-foil curved vanes with rolled edges to deflect water and 100% rust-free all-aluminum construction. The Whirlybird? turbine's large flashing makes installation easy. The Whirlybird? turbine's exclusive vari-pitch base adjusts to a 12/12 roof pitch for use on many roof applications. When installed properly, the Whirlybird? turbine reduces energy bills and the likelihood of winter ice buildup.
|
Use with all attic power gable mount vents, moving air opens the louvers only when the power vent is operating, when vent is off, shutter helps prevent infiltration of rain, snow, insects, etc, maintenance-free white aluminum construction, can be painted if desired.
|
Permanently lubricated track system, upper and lower stainless steel ball bearings prevents metal-to-metal contact, encased to help prevent dirt, dust, sand and other foreign materials from damaging bearings for long life, less friction, smoother spin and wear resistance. Heavy-duty steel spider braces and case-hardened steel shaft for long-lasting strength/durability. Simple, mechanically-locked, two-piece head/base for faster, easier installation. Pre-punched bottom/crimped collar of one-piece base fits tighter, makes installation easier and allows for adjustability up to 12/12 pitch without removing turbine. Extra-large flashing and head with included bottom ring for easier installation and better weather protection. Double ribbed vanes, with convex top, direct even wind-driven rain away from the unit. Dade County/Texas Department of Insurance approved.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Permanently lubricated track system, upper and lower stainless steel ball bearings prevents metal-to-metal contact, encased to help prevent dirt, dust, sand and other foreign materials from damaging bearings for long life, less friction, smoother spin and wear resistance. Heavy-duty steel spider braces and case-hardened steel shaft for long-lasting strength/durability. Simple, mechanically-locked, two-piece head/base for faster, easier installation. Pre-punched bottom/crimped collar of one-piece base fits tighter, makes installation easier and allows for adjustability up to 12/12 pitch without removing turbine. Extra-large flashing and head with included bottom ring for easier installation and better weather protection. Double ribbed vanes, with convex top, direct even wind-driven rain away from the unit. Dade County/Texas Department of Insurance approved.
|
Classic design and function for venting air through side walls, durable, maintenance-free, UV stabilized and constructed with color molded-through so they wont scratch, flake or fade, built-in concealed exhaust flap stays closed when not in use, net free area 25 sq-in, locking positions 3/4, 1 and 1-1/4 in, fitted with 6 in exhaust pipe and pipe length 8-1/10 in, wire screen included. Lifetime limited warranty. Made in USA.
|
Permanently lubricated track system, upper and lower stainless steel ball bearings prevents metal-to-metal contact, encased to help prevent dirt, dust, sand and other foreign materials from damaging bearings for long life, less friction, smoother spin and wear resistance. Heavy-duty steel spider braces and case-hardened steel shaft for long-lasting strength/durability. Simple, mechanically-locked, two-piece head/base for faster, easier installation. Pre-punched bottom/crimped collar of one-piece base fits tighter, makes installation easier and allows for adjustability up to 12/12 pitch without removing turbine. Extra-large flashing and head with included bottom ring for easier installation and better weather protection. Double ribbed vanes, with convex top, direct even wind-driven rain away from the unit. Dade County/Texas Department of Insurance approved.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
One-piece aluminum central louver panel construction with pre-punched louvered vanes. Designed for flush or recessed mounting.
|
Replacement motor for GM30, PG1, PG2, MD105, MD105D, H122D, PR1, PR1D, PR2D, PR2DHT, EGV5, ERV4 and ERV5 series power vents.
|
Allows user to control moisture and humidity levels during colder months. Adjustable to fit individual attic humidity levels. Wires parallel with existing thermostat.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
The most versatile 20 ft roll of roof ventilation product on the market. Helps to keep attics cool and allows hot, moist air to release at the highest point that is essential to achieving a balanced ventilation system. It works with a wide range of roofing materials and installs on the hip and ridge for a clean appearance. The StormStop? Membrane allows air to flow while preventing all forms of weather from entering the attic space.
|
All Lomanco? Whirlybird? turbines come with a lifetime transferable warranty. Simply put, you can't buy a better turbine. The turbine design features permanently lubricated upper and lower ball bearings that ensure long life and no maintenance. Other common features of the turbine are its rigid spider-type construction riveted at every connection and tested to withstand winds of 110 mph, 21 air-foil curved vanes with rolled edges to deflect water and 100% rust-free all-aluminum construction. The Whirlybird? turbine's large flashing makes installation easy. The Whirlybird? turbine's exclusive vari-pitch base adjusts to a 12/12 roof pitch for use on many roof applications. When installed properly, the Whirlybird? turbine reduces energy bills and the likelihood of winter ice buildup.
|
Permanently lubricated track system, upper and lower stainless steel ball bearings prevents metal-to-metal contact, encased to help prevent dirt, dust, sand and other foreign materials from damaging bearings for long life, less friction, smoother spin and wear resistance. Heavy-duty steel spider braces and case-hardened steel shaft for long-lasting strength/durability. Simple, mechanically-locked, two-piece head/base for faster, easier installation. Pre-punched bottom/crimped collar of one-piece base fits tighter, makes installation easier and allows for adjustability up to 12/12 pitch without removing turbine. Extra-large flashing and head with included bottom ring for easier installation and better weather protection. Double ribbed vanes, with convex top, direct even wind-driven rain away from the unit. Dade County/Texas Department of Insurance approved.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Galvanized construction, externally braced for added strength. Heavy-duty construction ideal for coastal and high wind areas. Simple, two-piece assembly for faster installation. Permanently lubricated dual bearing system for long-lasting performance. Stainless steel ball bearings. 720 cfm air movement. No.GC12E Dade County Approved 02-0524.03. Nos.GC12EF and GC12EWWF Florida Building Code (FBC) Approved FL5027.
|
The Lomanco? Series 900 adjustable louversfit roof pitches of 2-1/2/12 to 9/12. The ingenious design actually forces the louver blades to pivot, changing angle as the unit is adjusted. This permits maximum air flow capacity while assuring optimum protection from the weather.
|
Permanently lubricated track system, upper and lower stainless steel ball bearings prevents metal-to-metal contact, encased to help prevent dirt, dust, sand and other foreign materials from damaging bearings for long life, less friction, smoother spin and wear resistance. Heavy-duty steel spider braces and case-hardened steel shaft for long-lasting strength/durability. Simple, mechanically-locked, two-piece head/base for faster, easier installation. Pre-punched bottom/crimped collar of one-piece base fits tighter, makes installation easier and allows for adjustability up to 12/12 pitch without removing turbine. Extra-large flashing and head with included bottom ring for easier installation and better weather protection. Double ribbed vanes, with convex top, direct even wind-driven rain away from the unit. Dade County/Texas Department of Insurance approved.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Drip channel drains water to the front of the siding to eliminate wood rot. Wide trim ring, removable template, large flange and level lines. Injection-molded UV-resistant polypropylene for impact. Molded in screen prevents insects and bees from nesting in gable vent. Molded in screen cannot become unglued. Deep wood grain finish enhances appearance for a real wood look. Weeping holes prevent condensation or moisture from remaining trapped. Suitable for use with vinyl or aluminum siding, shake, stucco or brick. 44 sq-in of net-free area for 12 x 18 in and 18 x 24 in, 74 sq-in of net-free area for 22 x 28 in. Rough cut opening is 12-1/2 x 18-1/4 in.
|
Drip channel drains water to the front of the siding to eliminate wood rot. Wide trim ring, removable template, large flange and level lines. Injection-molded UV-resistant polypropylene. Molded in screen prevents insects and bees from nesting in gable vent. Molded in screen cannot become unglued. Deep wood grain finish enhances appearance for a real wood look. Weeping holes prevent condensation or moisture from remaining trapped. Suitable for use with vinyl or aluminum siding, shake, stucco or brick. 90 sq-in of net-free area.
|
Lomanco End Plug, High-Density Foam
|
|
|
Headquarters Palm City, Jensen Beach, Stuart
