Home > HARDWARE > CONSTRUCTION HARDWARE > JOIST HANGERS & CONNECTORS > FRAMING ANGLES/ANCHORS
Sort By:
Page of 1
RIGID TIE RAIL CONNECTOR 20GA ANGLE MED LARGE ZMAX 2X3IN SS RIGID TIE ANGLE 90DEG 16GA BLK
The Outdoor Accents? APRTR connects a 2X member to another member in wood construction applications. Manufactured to high-quality standards to ensure solid performance, this Rigid Tie connector features ZMAX? galvanization with a black powder-coat finish for added corrosion resistance. As part of the Outdoor Accents accessories line, this decorative hardware connector can be used with either the Mission Collection? or Avant Collection?, as well as separately to add flair to any outdoor project. The ML angle combines strength and versatility through the use of Strong-Drive? SDS heavy-duty connector screws. Fastener holes are staggered to minimize wood splitting and opposing hole patterns allow for back-to-back installation without fastener interference. The Outdoor Accents? APRTA is designed to connect two wood members at a 90 deg angle. This Rigid Tie angle fastens the members on two sides, eliminating the need for angle bracing. Manufactured to high-quality standards to ensure solid performance, this Rigid Tie connector features ZMAX? galvanization with a black powder-coat finish for added corrosion resistance. As part of the Outdoor Accents accessories line, this decorative hardware connector can be used with either the Mission Collection? or Avant Collection?, as well as separately to add flair to any outdoor project.
SKEWABLE L ANGLE 18GA ZMAX 90DEG ANGLE ZMAX BLACK 12GA 6X L-ANGLE MED ZMAX 12GA 2 X 4IN
Simpson Strong-Tie Skewable Angle, Steel, ZMAX, 3-1/2 in Width, 1-1/4 in Depth, 7-7/8 in Height, 18 ga Material Thickness Outdoor Accents? angles tie together beams, rafters and more. The APVA angle makes structural connections between beams and posts more visually appealing. These 90 deg angles make connections stronger and provide consistent, straight corners for a variety of outdoor projects. Part of the Avant collection. The ML-angle combines strength and versatility through the use of Strong-Drive? SDS heavy-duty connector screws. Fastener holes are staggered to minimize wood splitting and opposing hole patterns allow for back-to-back installation without fastener interference.
L-ANGLE MED ZMAX 12GA 2 X 8IN HURRICANE TIE GALV 1-3/8 X 6IN L-ANGLE MED ZMAX 12GA 2 X 6IN
The ML-angle combines strength and versatility through the use of Strong-Drive? SDS heavy-duty connector screws. Fastener holes are staggered to minimize wood splitting and opposing hole patterns allow for back-to-back installation without fastener interference. The H2.5A single-sided hurricane tie is designed to resist moderate loads at the rafter/truss to-top-plate connection. As part of a continuous load path, the H2.5A resists both lateral and uplift loads. The symmetrical design eliminates the need for separate right and left parts. The ML-angle combines strength and versatility through the use of Strong-Drive? SDS heavy-duty connector screws. Fastener holes are staggered to minimize wood splitting and opposing hole patterns allow for back-to-back installation without fastener interference.
HURRICANE TIE T-SHP GALV 18GA 90DEG ANGLE ZMAX BLACK 12GA 4X 90DEG ANGLE ZMAX BLK 3-1/4X3IN
The H2.5T single-sided hurricane tie is designed to resist moderate loads at the rafter/truss to-top-plate connection. As part of a continuous load path, the H2.5T resists both lateral and uplift loads. H2.5T ties are available in left and right-hand models and can be installed in pairs. Outdoor Accents? angles tie together beams, rafters and more. The APVA angle makes structural connections between beams and posts more visually appealing. These 90 deg angles make connections stronger and provide consistent, straight corners for a variety of outdoor projects. Part of the Avant collection. Outdoor Accents? angles tie together beams, rafters and more. The APA angle makes structural connections between beams and posts much more visually appealing. These angles make connections stronger and provide consistent, straight corners for a variety of outdoor projects.
FRMG ANGLE GALV 1-7/16X2-1/2IN STRINGER CONNECTOR ADJ ZMAX FRMG ANGLE GALV 1-7/16X4-1/2IN
The A34 is a framing angle designed for making a variety of connections. The angle is secured with nails or SD screws and features a speed prong to temporarily hold the connector in place during fastening. The economical A34 provides easy and fast installation. The LSC adjustable stair-stringer connector offers a versatile, concealed connection between the stair-stringer and the carrying header or rim board while replacing costly framing. Field slopeable to all common stair-stringer pitches, the LSC connector is suitable for either solid or notched stringers. The A35 is a balanced and completely reversible framing angle designed for making a variety of connections. The angle's exclusive bend slot allows instant and accurate field bends for all two and three-way ties. The A35 is secured with nails and features a speed prong to temporarily hold the connector in place for easy and fast installation.
A-ANGLE ZINC GALV 3X3X1-1/2IN CNR CONNECTOR TIE RGD ZMAX 2X RFTR CONNECTOR RIDGE GALV 18GA
Our line of angles provides a way to make a wide range of 90 deg connections. The RTC is a uniquely designed rigid tie connector that connects two horizontal members at a corner to a vertical wood member. Manufactured to high-quality standards to ensure solid performance, this corner rigid tie connector features a galvanized finish for added corrosion resistance. An interlock provides alignment control and correct nailing locations. For a rafter-to-face connector, flatten the top-flange into the face plane. The RR may be used with rafters sloped up to 30 deg.
HURRICANE TIE ZMAX 1-3/8 X 6IN HURRICANE TIE GALV 1-1/4 X 8IN HURRCANE TIE GALV 1-9/16X4-5/8
The H2.5A single-sided hurricane tie is designed to resist moderate loads at the rafter/truss to-top-plate connection. As part of a continuous load path, the H2.5A resists both lateral and uplift loads. The symmetrical design eliminates the need for separate right and left parts. The H8 single-sided hurricane tie is designed to resist moderate loads at the top of a wall connection. Provides a connection as part of a continuous load path to resist wind and seismic forces. The H8 is versatile and has been tested for connecting I-joist rafters to double-top-plates as well as studs to sill plates. The H3 single-sided hurricane tie is designed to resist moderate loads at the rafter/truss to-top-plate connection. As part of a continuous load path, the H3 resists both lateral and uplift loads. H3 ties are available in left and right-hand models and can be installed in pairs.
A-ANGLE GLV 4-9/16X4-3/8X1-1/2 MUDSILL ANCHOR ZMAX 18GA 15IN GUSSET ANGLE GALV 18GA 2-3/4IN
Our line of angles provides a way to make a wide range of 90 deg connections. The MAB is a mudsill anchor with the design flexibility to anchor the mudsill to concrete block, poured walls or slab foundations. Because of its unique design, the MAB can eliminate certain problems associated with misplaced anchor bolts. The GA angle is a small, versatile angle designed to improve corner stability. The engineered and tested gusset in the angle increases strength for lateral and uplift loads. The GA installs easily with nails, or for increased loads, with Strong-Drive? SD Connector screws.
L-ANGLE HEAVY GALV 7GA 3 X 3IN HURRICANE TIE ZINC GALV 18GA A-ANGLE ZINC GALV 8 X 8 X 2IN
The HL is a versatile angle designed to improve corner stability. This multipurpose connector helps promote standardization and construction economy. The L-shaped design of this heavy utility strap makes it ideal for a variety of applications where two members meet at a 90 deg angle. The H1A provides a connection between the truss or rafter and the wall of the structure that helps resist wind and seismic forces. The H1A is designed for nominal 2X lumber. These U-shaped hurricane ties provide faster installation than using two single-sided ties. The embossments add stiffness in crucial areas for improved performance. Our line of angles provides a way to make a wide range of 90 deg connections.
A-ANGLE GALV 5-7/8X5-7/8X1-1/2 L-ANGLE ADJ GALV 18GA 3-3/8IN FRMG ANGLE ZMAX 1-7/16X4-1/2IN
Our line of angles provides a way to make a wide range of 90 deg connections. The LS connector is a cost-effective method for connecting roof rafters to hip rafters. The durable design and fastening options of these load-rated skewable angles make them an ideal option compared to field-fabricated clip angles. The LS has well-defined fastener locations and testing ensures that the tabulated load values account for connection eccentricities. The A35 is a balanced and completely reversible framing angle designed for making a variety of connections. The angle's exclusive bend slot allows instant and accurate field bends for all two and three-way ties. The A35 is secured with nails and features a speed prong to temporarily hold the connector in place for easy and fast installation.
STAIRCASE ANGLE ZMAX 8-1/4IN L-ANGLE ADJ ZMAX 18GA 6-3/8IN L-ANGLE REINFORCING GALV 3IN
For use in structurally sound staircase framing. The TA eliminates costly conventional notching. The LS connector is a cost-effective method for connecting roof rafters to hip rafters. The durable design and fastening options of these load-rated skewable angles make them an ideal option compared to field-fabricated clip angles. The LS has well-defined fastener locations and testing ensures that the tabulated load values account for connection eccentricities. The L-angle is a general utility-reinforcing connector with multiple uses. The durable design and fastening options of these load-rated skewable angles make them an ideal option compared to field-fabricated clip angles. The L-angle has well-defined fastener locations and testing ensures that the tabulated load values account for connection eccentricities.
GUSSET ANGLE GALV 18GA 3-1/4IN A-ANGLE GALV 2X1-1/2X1-3/8IN 90DEG ANGLE ZMAX BLK 3-3/4X5IN
The GA angle is a small, versatile angle designed to improve corner stability. The engineered and tested gusset in the angle increases strength for lateral and uplift loads. The GA installs easily with nails, or for increased loads, with Strong-Drive? SD Connector screws. Our line of angles provides a way to make a wide range of 90 deg connections. Outdoor Accents? angles tie together beams, rafters and more. The APA angle makes structural connections between beams and posts much more visually appealing. These angles make connections stronger and provide consistent, straight corners for a variety of outdoor projects.
HURRICANE TIE ZMAX 1-1/4 X 8IN TRUSS ANCHOR EMB GALV 16G 16IN TRUSS ANCHOR EMB GALV 16G 12IN
The H8 single-sided hurricane tie is designed to resist moderate loads at the top of a wall connection. Provides a connection as part of a continuous load path to resist wind and seismic forces. The H8 is versatile and has been tested for connecting I-joist rafters to double-top-plates as well as studs to sill plates. The HETA provides an engineered method to attach roof trusses securely to concrete and masonry walls. This heavy embedded truss anchor features staggered nail patterns to strengthen uplift resistance and can be used in pairs on single and multi-ply trusses. The versatile HETA can be installed straight or field-bent around truss or rafter members. The HETA embedded truss anchor series provides an engineered method to properly attach roof trusses to concrete and masonry walls. The products are designed with staggered nail patterns for greater uplift resistance. Information regarding the use of two anchors on single and multi-ply trusses is included.
WALL BRACING T-SHAPE GALV 22GA A-ANGLE ZMAX 2X1-1/2X1-3/8IN HURRICANE TIE ZMAX GALV 18GA
The TWB is designed to resist racking during construction. This T-shaped wall bracing features two rolled edges for extra strength and safety. The TWB is not designed to replace structural panel shearwall load-carrying components. Our line of angles provides a way to make a wide range of 90 deg connections. The H1A provides a connection between the truss or rafter and the wall of the structure that helps resist wind and seismic forces. The H1A is designed for nominal 2X lumber. These U-shaped hurricane ties provide faster installation than using two single-sided ties. The embossments add stiffness in crucial areas for improved performance.
STAIRCASE ANGLE ZMAX 10-1/4IN TRUSS ANCHOR EMB GALV 18G 12IN RIGID TIE ANGLE ZMAX 2X
For use in structurally sound staircase framing. The TA eliminates costly conventional notching. The META provides an engineered method to attach roof trusses securely to concrete and masonry walls. This medium embedded truss anchor features staggered nail patterns to strengthen uplift resistance and can be used in pairs on single and multi-ply trusses. The versatile META can be installed straight or field-bent around truss or rafter members. The RTA is designed to connect two wood members at a 90 deg angle. This rigid tie angle fastens the members on two sides, eliminating the need for angle bracing. Manufactured to high-quality standards to ensure solid performance, this rigid tie connector features a galvanized finish for added corrosion resistance.
HURRICANE TIE ZINC GALV 18GA MUDSILL ANCHOR ZMAX 16GA MUDSILL ANCHOR ZMAX 16GA
The H10A series holds the rafter or truss on both sides for high uplift applications with embossments that add stiffness in crucial areas for improved performance. These U-shaped hurricane ties provide faster installation than using two single-sided ties. H10A models come with optional fastener holes to connect roof blocking to the top-plate. Slots allow field bending up to a maximum pitch of 6:12 to accommodate angled blocking. The MASA is a mudsill anchor that provides a time-saving alternative to anchor bolts. This mudsill anchor eliminates the need for 3 in square plate washers for seismic design and, in some cases, has allowable loads that meet or exceed the parallel and perpendicular-to-plate shear loads of other cast-in-place anchors. The MASA is ideal for installation on standard forms and is code listed by ICC-ES under the 2012, 2015, 2018 and 2021 IBC? and IRC?. The MASB is a mudsill anchor designed specifically to anchor a mudsill to concrete block foundations or walls. The unique design eliminates problems associated with misplaced anchor bolts. The MASB easily installs into wet concrete-grouted CMU block for a time-saving alternative to anchor bolts.
WALL BRACE COIL ZINC GALV 16GA L-ANGLE REINFORCING GALV 7IN TRUSS ANCHOR EMB GALV 18G 16IN
The WB is designed to resist racking during construction and provide long-term strength for structural walls. This wall bracing provides resistance to in-plane forces, creating an overall stronger structure. While not designed to replace structural panel shearwall load-carrying components, the WB is a cost-effective option that fulfills the same code bracing requirements as a 1 x 4 let-in brace with a faster install process. The L-angle is a general utility-reinforcing connector with multiple uses. The durable design and fastening options of these load-rated skewable angles make them an ideal option compared to field-fabricated clip angles. The L-angle has well-defined fastener locations and testing ensures that the tabulated load values account for connection eccentricities. The META provides an engineered method to attach roof trusses securely to concrete and masonry walls. This medium embedded truss anchor features staggered nail patterns to strengthen uplift resistance and can be used in pairs on single and multi-ply trusses. The versatile META can be installed straight or field-bent around truss or rafter members.
A-ANGLE ZINC GALV 11X3-5/8X2IN 90DEG ANGLE ZMAX BLACK 14GA 2X L-ANGLE REINFORCING ZMAX 7IN
Our line of angles provides a way to make a wide range of 90 deg connections. Outdoor Accents? angles tie together beams, rafters and more. The APVA angle makes structural connections between beams and posts more visually appealing. These 90 deg angles make connections stronger and provide consistent, straight corners for a variety of outdoor projects. Part of the Avant collection. The L-angle is a general utility-reinforcing connector with multiple uses. The durable design and fastening options of these load-rated skewable angles make them an ideal option compared to field-fabricated clip angles. The L-angle has well-defined fastener locations and testing ensures that the tabulated load values account for connection eccentricities.
HURRICANE TIE ZINC GALV 18GA COMP BRIDGING GALV 20G 2X10-16 L-ANGLE ADJ ZMAX 18GA 4-7/8IN
The H10A series holds the rafter or truss on both sides for high uplift applications with embossments that add stiffness in crucial areas for improved performance. These U-shaped hurricane ties provide faster installation than using two single-sided ties. H10A models come with optional fastener holes to connect roof blocking to the top-plate. Slots allow field bending up to a maximum pitch of 6:12 to accommodate angled blocking. The NCA provides bracing between floor joists as a critical contribution to the structural strength of a floor. Installed in pairs, this nail less compression bridging keeps joists in place and prevents them from rotating while distributing loads over more than one joist. The NCA features precision-formed V-shaped prongs, in place of nails, to provide a secure grip before the drive-home blow for deeper prong penetration. The LS connector is a cost-effective method for connecting roof rafters to hip rafters. The durable design and fastening options of these load-rated skewable angles make them an ideal option compared to field-fabricated clip angles. The LS has well-defined fastener locations and testing ensures that the tabulated load values account for connection eccentricities.
HURRICANE TIE ZMAX GALV 18GA A-ANGLE GALV 2X1-1/2X2-3/4IN ROOF TRUSS CLIP GALV 1-1/4IN
The H10A series holds the rafter or truss on both sides for high uplift applications with embossments that add stiffness in crucial areas for improved performance. These U-shaped hurricane ties provide faster installation than using two single-sided ties. H10A models come with optional fastener holes to connect roof blocking to the top-plate. Slots allow field bending up to a maximum pitch of 6:12 to accommodate angled blocking. Our line of angles provides a way to make a wide range of 90 deg connections. For alignment control between a roof truss and nonbearing walls, the 1-1/2 in slot permits vertical truss chord movement when loads are applied.
90DEG ANGLE ZMAX BLK 2X1-3/8IN TRUSS SPACER-RESTRAINT 22GA L-ANGLE REINFORCING GALV 5IN
Outdoor Accents? angles tie together beams, rafters and more. The APA angle makes structural connections between beams and posts much more visually appealing. These angles make connections stronger and provide consistent, straight corners for a variety of outdoor projects. The Simpson Strong-Tie? TSBR truss spacer-restraint is a time-saving lateral-restraint product for wood and CFS framing that improves quality and safety while helping to meet the prescriptive recommendations of the WTCA/TPI. Easier to install than wood bracing, the TSBR firmly grips the trusses, capturing on-center spacing and keeping them vertical and plumb after placement, resulting in a better truss installation. The unique design eliminates additional time spent measuring truss spacing and laying out temporary lateral bracing. And once installed, the TSBR can remain in place to be sheathed over, thereby eliminating the need to remove temporary bracing and creating a safer, more stable work platform. The L-angle is a general utility-reinforcing connector with multiple uses. The durable design and fastening options of these load-rated skewable angles make them an ideal option compared to field-fabricated clip angles. The L-angle has well-defined fastener locations and testing ensures that the tabulated load values account for connection eccentricities.
A-ANGLE ZMAX 2X1-1/2X2-3/4IN HURRICANE TIE RAFTER GALV 18GA L-ANGLE REINFORCING ZMAX 9IN
Our line of angles provides a way to make a wide range of 90 deg connections. The HS24 attaches the bottom chord of a truss or rafter at pitches from 0/12 to 4/12 to double 2 x 4 top-plates. Double-shear nailing allows for higher lateral resistance in applications when bottom chord of truss or rafter has no slope. The HS24 saddle rafter tie is designed to help resist wind and seismic forces. The L-angle is a general utility-reinforcing connector with multiple uses. The durable design and fastening options of these load-rated skewable angles make them an ideal option compared to field-fabricated clip angles. The L-angle has well-defined fastener locations and testing ensures that the tabulated load values account for connection eccentricities.
L-ANGLE REINFORCING ZMAX 5IN TRUSS SPACER GALV 24GA 24IN HOLDOWN GALV 10GA 16-5/8IN
The L-angle is a general utility-reinforcing connector with multiple uses. The durable design and fastening options of these load-rated skewable angles make them an ideal option compared to field-fabricated clip angles. The L-angle has well-defined fastener locations and testing ensures that the tabulated load values account for connection eccentricities. The TSF is a fast and accurate method for spacing trusses that eliminates layout marking of top-plates and can be left in place under the sheathing. Accuracy is improved, spacing errors are minimized and it is easy to use. The HDU is designed for use in shearwalls and braced-wall panels, as well as other lateral applications in wood construction. The HDU uses Strong-Drive? SDS heavy-duty connector screws which install easily, reduce fastener slip and provide a greater net section than bolts.
HURRICANE TIE ZMAX GALV 18GA HURR GUSSET ANGLE KIT 14GA HOLDOWN GALV 14GA 10-15/16IN
The H2A single-sided hurricane tie makes a direct connection between the rafter or truss, the top-plates and the wall studs. A value-added solution for high-wind applications, it is designed to resist uplift and lateral loads. By capturing all three framing members, the H2A eliminates the need for a separate top-plate-to-stud connection. The HGA is designed to secure the truss to the top-plate in gable end truss connections and other framing applications. The engineered gusset in the angle increases strength for lateral and uplift loads. This hurricane gusset angle installs easily with Strong-Drive? SDS heavy-duty connector screws. The HDU is designed for use in shearwalls and braced-wall panels, as well as other lateral applications in wood construction. The HDU uses Strong-Drive? SDS heavy-duty connector screws which install easily, reduce fastener slip and provide a greater net section than bolts.
HOLDOWN GALV 14GA 8-11/16IN HOLDOWN GALV 14GA 13-3/16IN
The HDU is designed for use in shearwalls and braced-wall panels, as well as other lateral applications in wood construction. The HDU uses Strong-Drive? SDS heavy-duty connector screws which install easily, reduce fastener slip and provide a greater net section than bolts. The HDU is designed for use in shearwalls and braced-wall panels, as well as other lateral applications in wood construction. The HDU uses Strong-Drive? SDS heavy-duty connector screws which install easily, reduce fastener slip and provide a greater net section than bolts.