Home > HARDWARE > CONSTRUCTION HARDWARE > JOIST HANGERS & CONNECTORS > STRAPS
Sort By:
Page of 1
FLAT STRAP ZMAX 12GA 3X11-1/4 DECK JOIST TIE ZMAX BLK 2X4IN DECK JOIST TIE ZMAX BLK 2X6IN
The Outdoor Accents decorative hardware product line features connectors and fasteners that bring beauty and strength to custom outdoor living structures. The APVST flat strap works for lumber in both nominal and rough sizes. It can be used to connect two beams together or added to any project as a decorative accent. Part of the Avant Collection. The Simpson Strong-Tie? Outdoor Accents? line of decorative hardware features connectors and fasteners that bring beauty and strength to custom outdoor living structures. The deck joist tie attaches 2X joists to the side of 4X or larger support posts. It installs quickly and easily with the Outdoor Accents? structural wood screw and hex head washer for the look of a bolted connection. Part of the Avant collection. The Simpson Strong-Tie? Outdoor Accents? line of decorative hardware features connectors and fasteners that bring beauty and strength to custom outdoor living structures. The deck joist tie attaches 2X joists to the side of 4X or larger support posts. It installs quickly and easily with the Outdoor Accents? structural wood screw and hex head washer for the look of a bolted connection. Part of the Avant collection.
L-STRAP ZMAX BLACK 12GA 4X4IN T-STRAP ZMAX BLACK 12GA 4X4IN L-STRAP ZMAX BLACK 12GA 6X6IN
Outdoor Accents? flat L-straps from Simpson Strong-Tie? bring decorative appeal and lateral strength to any outdoor living space. They provide reinforcement for a connection where one lumber piece intersects another at a 90 deg angle. This L-strap is easily installed with Outdoor Accents? structural screws and hex head washers. Part of the Avant Collection. Outdoor Accents? flat T-straps from Simpson Strong-Tie? bring decorative appeal and lateral strength to any outdoor living space. They provide reinforcement for a connection where one lumber piece intersects another at a 90 deg angle. This T-strap is easily installed with Outdoor Accents? structural screws and hex head washers. Part of the Avant collection. Outdoor Accents? flat L-straps from Simpson Strong-Tie? bring decorative appeal and lateral strength to any outdoor living space. They provide reinforcement for a connection where one lumber piece intersects another at a 90 deg angle. This L-strap is easily installed with Outdoor Accents? structural screws and hex head washers. Part of the Avant Collection.
T-STRAP ZMAX BLACK 12GA 6X6IN L-STRAP ZMAX BLACK 12GA 6X6IN T-STRAP ZMAX BLACK 12GA 6X6IN
Outdoor Accents? flat T-straps from Simpson Strong-Tie? bring decorative appeal and lateral strength to any outdoor living space. They provide reinforcement for a connection where one lumber piece intersects another at a 90 deg angle. This T-strap is easily installed with Outdoor Accents? structural screws and hex head washers. Part of the Avant collection. Outdoor Accents? flat L-straps from Simpson Strong-Tie? bring decorative appeal and lateral strength to any outdoor living space. They provide reinforcement for a connection where one lumber piece intersects another at a 90 deg angle. These straps are easily installed with Outdoor Accents? structural screws and hex head washers. Outdoor Accents? flat T-straps from Simpson Strong-Tie? bring decorative appeal and lateral strength to any outdoor living space. They provide reinforcement for a connection where one lumber piece intersects another at a 90 deg angle. Install with Outdoor Accents structural screws and hex-head washer (sold separately) for a decorative look.
STRAP TIE LIGHT GALV 1-1/4X9IN DECK TENSION TIE KIT ZMAX 14GA STRAP TIE LT GALV 1-1/4 X 12IN
The LSTA is designed to resist tension loads in wood-to-wood applications. This light strap-tie utilizes a staggered nail pattern to help minimize wood splitting. The LSTA is designed for use on the edge of 2X members. DTT tension ties are safe, cost-effective connectors designed to meet or exceed code requirements for deck construction. These versatile DTT connectors are also load-rated as a hold-down for light-duty shearwalls and braced-wall panel applications. The LSTA is designed to resist tension loads in wood-to-wood applications. This light strap-tie utilizes a staggered nail pattern to help minimize wood splitting. The LSTA is designed for use on the edge of 2X members.
T-STRAP GALV 14GA 6 X 6IN L-STRAP GALV 14GA 6 X 6IN STRAP TIE HVYD GALV 12GA 6IN
The T is designed for beam-to-column applications. This versatile utility strap is T-shaped, making it ideal for transferring tension loads in a variety of applications. The T features well-placed fastener holes and can easily be installed with nails or bolts. The L is designed for beam-to-column applications. This versatile utility strap is L-shaped, making it ideal for transferring tension loads in a variety of applications. The L features well-placed fastener holes and can easily be installed with nails or bolts. The HRS is designed to resist tension forces between two wood members. The HRS6, HRS8 and HRS12 can be installed on the edge of 2X members. These straps are load-rated, precut straps designed for quick installation and optimal performance. The HRS installs where top or bottom plates are cut, at wall intersections and as ridge ties.
STRAP TIE LT GALV 1-1/4 X 18IN STRAP TIE HVYD GALV 12GA 8IN STRAP TIE HVYD GALV 12GA 12IN
The LSTA is designed to resist tension loads in wood-to-wood applications. This light strap-tie utilizes a staggered nail pattern to help minimize wood splitting. The LSTA is designed for use on the edge of 2X members. The HRS is designed to resist tension forces between two wood members. The HRS6, HRS8 and HRS12 can be installed on the edge of 2X members. These straps are load-rated, precut straps designed for quick installation and optimal performance. The HRS installs where top or bottom plates are cut, at wall intersections and as ridge ties. The HRS is designed to resist tension forces between two wood members. The HRS6, HRS8 and HRS12 can be installed on the edge of 2X members. These straps are load-rated, precut straps designed for quick installation and optimal performance. The HRS installs where top or bottom plates are cut, at wall intersections and as ridge ties.
STRAP TIE LT GALV 1-1/4 X 24IN DECK JOIST TIE ZMAX 14GA 4X4IN L-STRAP ZMAX BLACK 12GA 4X4IN
The LSTA is designed to resist tension loads in wood-to-wood applications. This light strap-tie utilizes a staggered nail pattern to help minimize wood splitting. The LSTA is designed for use on the edge of 2X members. The DPTZ deck post tie products are used to attach 4 x 4 (DPT7Z) vertical posts to the side of stringers, rims or other wood members. Outdoor Accents? flat L-straps from Simpson Strong-Tie? bring decorative appeal and lateral strength to any outdoor living space. They provide reinforcement for a connection where one lumber piece intersects another at a 90 deg angle. These straps are easily installed with Outdoor Accents? structural screws and hex head washers.
DECK JOIST TIE ZMAX 14GA STRAP TIE MED GALV 12GA 37IN STRAP TIE MED GALV 18GA 24IN
The DJT14Z deck joist tie is designed to attach 2X deck joists to the side of 4X or larger support posts. The DJT14Z can be installed with either nails or bolts. The MST is designed to resist tension loads in floor-to-floor and other applications. This high-capacity strap features a dense nailing pattern and can be installed with either nails or bolts. The MST is a load-rated, precut strap designed for quick installation and optimal performance. It is suitable for connecting double 2X members or greater. The MSTA is designed to resist tension loads in wood-to-wood applications. This medium strap-tie utilizes a staggered nail pattern to help minimize wood splitting. The MSTA is designed for use on the edge of 2X members.
PILING STRAP HDG 7GA 2 X 18IN T-STRAP ZMAX BLACK 12GA 4X4IN STRAP TIE HVYD ZMAX 12GA 12IN
The PS is designed to support heavy, concentrated loads by creating a strong connection between wood girders and piles. The PS is a load-rated, precut strap designed for quick installation and optimal performance. This pile strap brings greatest strength to the connection when the wood members are notched. Outdoor Accents? flat T-strap from Simpson Strong-Tie? bring decorative appeal and lateral strength to any outdoor living space. They provide reinforcement for a connection where one lumber piece intersects another at a 90 deg angle. These straps are easily installed with Outdoor Accents? structural screws and hex head washers. The HRS is designed to resist tension forces between two wood members. The HRS416Z is designed for 4X members. These straps are load-rated, precut straps designed for quick installation and optimal performance. The HRS installs where top or bottom plates are cut, at wall intersections and as ridge ties.
STRAP TIE GALVANIZED 16GA 12IN TWIST STRAP HVY GALV 14GA 16IN TWIST STRAP MED GALV 16GA 12IN
The ST is designed to resist tension loads in a variety of applications. This economical strap-tie is ideal for installation where top or bottom plates are cut, at wall intersections and as ridge ties. The ST is a load-rated, precut strap designed for quick installation and optimal performance. The HTS provides a tension connection between two members. This economical twist strap resists heavy uplift loads at the rafter or heel of a truss. The HTS has a small bend section to reduce interference at the transition points between the two members. The MTS provides a tension connection between two members. This economical twist strap resists moderate uplift loads at the rafter or heel of a truss. The MTS has a small bend section to reduce interference at the transition points between the two members.
STRAP TIE MED ZMAX 18GA 24IN TWIST STRAP HVY GALV 14GA 20IN COILED STRAP GALV 22GA 25FT
The MSTA is designed to resist tension loads in wood-to-wood applications. This medium strap-tie utilizes a staggered nail pattern to help minimize wood splitting. The MSTA is designed for use on the edge of 2X members. The HTS provides a tension connection between two members. This economical twist strap resists heavy uplift loads at the rafter or heel of a truss. The HTS has a small bend section to reduce interference at the transition points between the two members. The CS is a continuous utility strap designed to resist tension and uplift loads. This coiled strap can be cut to length on the job site and used in a single 2X stud or post application. The CS is ideal for many applications including resisting uplift in a floor-to-floor application and also resisting tension in a horizontal application.
TWIST STRAP LT GALV 18GA 12IN COILED STRAP GALV 20GA 25FT STRAP TIE LT GALV 1-1/4 X 36IN
The LTS provides a tension connection between two members, resisting light to medium uplift loads at the rafter or heel of a truss. This economical light twist strap has a small bend section to reduce interference at the transition points between the two members. CS coiled utility straps are an ideal solution when it is desired to brace wall studs via the flanges with strap. These products are packaged in lightweight cartons (about 40 lb) and can be cut to length on the job site. The LSTA is designed to resist tension loads in wood-to-wood applications. This light strap-tie utilizes a staggered nail pattern to help minimize wood splitting. The LSTA is designed for use on the edge of 2X members.
TWIST STRAP MED ZMAX 16GA 12IN STRAP TIE GALVANIZED 16GA 18IN PILING STRAP HDG 7GA 4 X 18IN
The MTS provides a tension connection between two members. This economical twist strap resists moderate uplift loads at the rafter or heel of a truss. The MTS has a small bend section to reduce interference at the transition points between the two members. The ST is designed to resist tension loads in a variety of applications. This economical strap-tie is ideal for installation where top or bottom plates are cut, at wall intersections and as ridge ties. The ST is a load-rated, precut strap designed for quick installation and optimal performance. The PS is designed to support heavy, concentrated loads by creating a strong connection between wood girders and piles. The PS is a load-rated, precut strap designed for quick installation and optimal performance. This pile strap brings greatest strength to the connection when the wood members are notched.
COILED STRAP GALV 16GA 25FT TWIST STRAP MED GALV 16GA 16IN STRAP-TIE HOLDOWN ZMAX 51IN
The CS is a continuous utility strap designed to resist tension and uplift loads. This coiled strap can be cut to length on the job site and used in a single 2X stud or post application. The CS is ideal for many applications including resisting uplift in a floor-to-floor application and also resisting tension in a horizontal application. The MTS provides a tension connection between two members. This economical twist strap resists moderate uplift loads at the rafter or heel of a truss. The MTS has a small bend section to reduce interference at the transition points between the two members. The PA is a solution for CFS-to-concrete and concrete block connections. To support code requirements, the PA is designed to connect roof purlins to a masonry exterior wall. This purlin anchor features a dual-embedment line that allows for installation in concrete or concrete block (GFCMU).
TWIST STRAP MED GALV 16GA 18IN TWIST STRAP LT GALV 18GA 18IN COILED STRAP GALV 14GA 25 FT
The MTS provides a tension connection between two members. This economical twist strap resists moderate uplift loads at the rafter or heel of a truss. The MTS has a small bend section to reduce interference at the transition points between the two members. The LTS provides a tension connection between two members, resisting light to medium uplift loads at the rafter or heel of a truss. This economical light twist strap has a small bend section to reduce interference at the transition points between the two members. CS coiled utility straps are an ideal solution when it is desired to brace wall studs via the flanges with strap. These products are packaged in lightweight cartons (about 40 lb) and can be cut to length on the job site.
ZMAX STRAP TIE GALV 16G 36IN TWIST STRAP MED GALV 16GA 20IN
The MSTA is designed to resist tension loads in wood-to-wood applications. This medium strap-tie utilizes a staggered nail pattern to help minimize wood splitting. The MSTA is designed for use on the edge of 2X members. The MTS provides a tension connection between two members. This economical twist strap resists moderate uplift loads at the rafter or heel of a truss. The MTS has a small bend section to reduce interference at the transition points between the two members.