Home > HAND TOOLS > STRIKING AND CUTTING TOOLS > RIPPING/CHISELING
Choose a sub category:
WRECKING BARS PRY BARS AND PULLERS PINCH BARS
NAIL & TACK PULLERS NAIL SETS COLD CHISELS
PUNCHES & DRIFTS COLD CHISEL/PUNCH SETS HOLE PUNCHES
AWLS AND BRAD DRIVERS
Sort By:
Page of 2
Stanley 58-113 Square Nail Set Stanley 58-111 Nail Set Stanley 58-112 Square Nail Set
Ideal for setting nails into materials; long length for setting nails in hard-to-reach areas; fully hardened, precision-milled steel for long life; long, beveled tip for easy nail head alignment; square head prevents rolling when set down. Ideal for setting nails into materials. Long length for setting nails in hard-to-reach areas. Fully hardened, precision-milled steel for long life. Long, beveled tip for easy nail head alignment. Square head prevents rolling when set down. Ideal for setting nails into materials. Long length for setting nails in hard-to-reach areas. Fully hardened, precision-milled steel for long life. Long, beveled tip for easy nail head alignment. Square head prevents rolling when set down.
Stanley 58-911 Square Nail Set Stanley 58-912 Square Nail Set Stanley 58-913 Square Nail Set
Made of fully hardened, precision-milled steel with long, beveled tip for easy nail head alignment, grip is slip-resistant and ribbed to absorb shock, improving precision. Long length enables user to set nails in hard-to-reach areas. Made of fully hardened, precision-milled steel with long, beveled tip for easy nail head alignment, grip is slip-resistant and ribbed to absorb shock, improving precision. Long length enables user to set nails in hard-to-reach areas. Made of fully hardened, precision-milled steel with long, beveled tip for easy nail head alignment, grip is slip-resistant and ribbed to absorb shock, improving precision. Long length enables user to set nails in hard-to-reach areas.
PUNCH CENTER 5/64X4-1/2IN     PUNCH CENTER 1/8X5/16X5IN     PUNCH CENTER 1/4X6IN
The Vulcan center punch is made from drop forged, heat treated chrome alloy steel material with baked enamel finish and heavy duty hex shank. The Vulcan center punch is made from drop forged, heat treated chrome alloy steel material with baked enamel finish and heavy duty hex shank. The Vulcan center punch is made from drop forged, heat treated chrome alloy steel material with baked enamel finish and heavy duty hex shank.
PUNCH CENTER 5/32X5-1/2IN     Dasco 530-0 Center Punch General Tools 806 Jiffy Self-Center Punch
The Vulcan center punch is made from drop forged, heat treated chrome alloy steel material with baked enamel finish and heavy duty hex shank. Made of heat-treated high carbon American steel. Features precision ground point for marking accurate hole starting easier. Use on metals softer than their point. Hardened steel pin, knurled body provides no-slip grip, auto-centering and countersunk end. Used for creating starter screw holes.
Stanley 16-287 Cold Chisel Dasco 539-0 Prick Punch Dasco 592-0 Pin Punch
Used to cut or shape wrought iron, cast Iron, steel, brass, bronze, copper, aluminum, nuts and rivets. Made of heat-treated high carbon tough American steel that's polished and tapered. Used for marking scribe work pieces and layout work, these sharp polished points aid in accuracy. Use on metals softer than their points. Machined to exacting standards from heat-treated, high carbon American steel. Has a wide variety of uses in driving and removing such things as pins and keys, after initial removal by a machine punch or starter. Use a pin punch one size smaller than the pin being driven to prevent damage to the side walls containing the pin.
Dasco 540-0 Prick Punch Dasco 531-0 Center Punch ProSource JLO-0193L Pry Bars
Made of heat-treated high carbon tough American steel that's polished and tapered. Used for marking scribe work pieces and layout work, these sharp polished points aid in accuracy. Use on metals softer than their points. Made of heat-treated high carbon American steel. Features precision ground point for marking accurate hole starting easier. Use on metals softer than their point. The Vulcan pry bar is made from dropped forged steel. It has a matte black finish and the nail slots at both ends offer easy accessibility and leverage.
Dasco 400-0 Cold Chisel Wonder Bar II 55-045 Flat Pry Bar Dasco 541-0 Prick Punch
Dasco Pro cold chisels are precision ground for cutting, shaping and removing metal that is softer than the cutting edge of the chisel. Made of high carbon steel that has been heat-treated, these chisels are to be used on cast iron, wrought iron, steel, bronze and copper. The wonder bar is constructed from forged carbon steel which provides durability and strength. The bar is ideal for removing nails, lifting and prying objects. Beveled cutting edges and nail slots for quality performance. Made of heat-treated high carbon tough American steel that's polished and tapered. Used for marking scribe work pieces and layout work, these sharp polished points aid in accuracy. Use on metals softer than their points.
Vaughan & Bushnell 222 Double Ended Mini Pry Bar Dasco 401-0 Cold Chisel CHISEL CLD 3/8 CUT 5-1/2 LGTH
Vaughan Mini Bar, Steel, Powder-Coated, 5-1/2 in L Dasco Pro cold chisels are precision ground for cutting, shaping and removing metal that is softer than the cutting edge of the chisel. Made of high carbon steel that has been heat-treated, these chisels are to be used on cast iron, wrought iron, steel, bronze and copper. Cold chisel is ground for cutting, shaping and removing metal that is softer than the cutting edge. The blade and handle are made of chrome alloy steel with 3/8 in tip and 5-1/2 L.
AWL SCRATCH PLASTIC HNDL 4IN  Dasco 581-0 Pin Punch Dasco 582-0 Pin Punch
The scratch awls has a high impact plastic handle length of 4 in with a hardened and tempered steel blade. It can be used to start holes in soft wood and scribe or mark wood or other soft metals. Machined to exacting standards from heat-treated, high carbon American steel. Has a wide variety of uses in driving and removing such things as pins and keys, after initial removal by a machine punch or starter. Use a pin punch one size smaller than the pin being driven to prevent damage to the side walls containing the pin. Machined to exacting standards from heat-treated, high carbon American steel. Has a wide variety of uses in driving and removing such things as pins and keys, after initial removal by a machine punch or starter. Use a pin punch one size smaller than the pin being driven to prevent damage to the side walls containing the pin.
Dasco 402-0 Cold Chisel CHISEL COLD 1/2 CUT 6 LGTH    Dasco 583-0 Pin Punch
Dasco Pro cold chisels are precision ground for cutting, shaping and removing metal that is softer than the cutting edge of the chisel. Made of high carbon steel that has been heat-treated, these chisels are to be used on cast iron, wrought iron, steel, bronze and copper. Cold chisel is ground for cutting, shaping and removing metal that is softer than the cutting edge. The blade and handle are made of chrome alloy steel with 1/2 in tip and 6 in L. Machined to exacting standards from heat-treated, high carbon American steel. Has a wide variety of uses in driving and removing such things as pins and keys, after initial removal by a machine punch or starter. Use a pin punch one size smaller than the pin being driven to prevent damage to the side walls containing the pin.
Dasco 584-0 Pin Punch Dasco 532-0 Center Punch CHISEL CLD 5/8 CUT 6-1/2 LGTH
Machined to exacting standards from heat-treated, high carbon American steel. Has a wide variety of uses in driving and removing such things as pins and keys, after initial removal by a machine punch or starter. Use a pin punch one size smaller than the pin being driven to prevent damage to the side walls containing the pin. Made of heat-treated high carbon American steel. Features precision ground point for marking accurate hole starting easier. Use on metals softer than their point. Cold chisel is ground for cutting, shaping and removing metal that is softer than the cutting edge. The blade and handle are made of chrome alloy steel with 5/8 in tip and 6-1/2 L.
NAIL PUNCH SET 4PC            Dasco 405-0 Cold Chisel Toolbasix JLO-0323L  Tack Pullers
It enables you to quickly and easily locate the tool around the head of the protruding nail. Dasco Pro cold chisels are precision ground for cutting, shaping and removing metal that is softer than the cutting edge of the chisel. Made of high carbon steel that has been heat-treated, these chisels are to be used on cast iron, wrought iron, steel, bronze and copper. The Vulcan claw is made of heat-treated carbon steel blade with a square plastic handle.
Dasco 253-0 Roll Pin Punch Dasco 589-0 Pin Punch Dasco 564-0 Solid Punch
Made of heat-treated high carbon American steel. Machined specifically for removing spring or roll pins. Made with a hardened point, long shaft. Machined to exacting standards from heat-treated, high carbon American steel. Has a wide variety of uses in driving and removing such things as pins and keys, after initial removal by a machine punch or starter. Use a pin punch one size smaller than the pin being driven to prevent damage to the side walls containing the pin. Made from heat-treated high carbon American steel. Designed for installing pins, keys, rivets and for starting their removal.
Dasco 534-0 Center Punch CHISEL CLD 3/4IN CUT 7IN LGTH Great Neck Saw BD1 Magnetic Brad Nail Driver
Made of heat-treated high carbon American steel. Features precision ground point for marking accurate hole starting easier. Use on metals softer than their point. Cold chisel is ground for cutting, shaping and removing metal that is softer than the cutting edge. The blade and handle are made of chrome alloy steel with 3/4 in tip and 7 in L. The GreatNeck? magnetic brad and nail driver gets the job done without marring surfaces. This driver is ideal for working in tight corners and hard to reach spaces. The magnetic head holds the nail firm while downward pressure on an ergonomic solid wood handle easily inserts the nail. The driver is chrome-plated to resist rust. A metal ferrule is set firmly into the handle for durability.
Dasco 565-0 Solid Punch Stanley 58-230 Square Head Nail Set Dasco 590-0 Pin Punch
Made from heat-treated high carbon American steel. Designed for installing pins, keys, rivets and for starting their removal. Made of hardened and tempered alloy steel with square head. Round knurled body. Tips are cupped and chamfered. Square head prevents rolling. 4 in long. Set contains 1/32 in, 1/16 in and 3/32 in nails. Machined to exacting standards from heat-treated, high carbon American steel. Has a wide variety of uses in driving and removing such things as pins and keys, after initial removal by a machine punch or starter. Use a pin punch one size smaller than the pin being driven to prevent damage to the side walls containing the pin.
Dasco 566-0 Solid Punch Dasco 408-0 Cold Chisel Mintcraft JLO-0093L  Pry Bars
Made from heat-treated high carbon American steel. Designed for installing pins, keys, rivets and for starting their removal. Dasco Pro cold chisels are precision ground for cutting, shaping and removing metal that is softer than the cutting edge of the chisel. Made of high carbon steel that has been heat-treated, these chisels are to be used on cast iron, wrought iron, steel, bronze and copper. The Vulcan pry bar nail puller is made of dropped forged steel with hexagon steel construction for enhanced strength. It's a single claw tool.
Stanley 69-122 Scratch Awl Dasco 255-0 Roll Pin Punch Vulcan 32941 Wrecking Bars
Heat-treated and plated alloy steel blades hold up to repeated use and are corrosion resistance. Chrome-plated steel ferrule for added strength. Bright, smooth finish on bar. Machined hardwood handle. Bar diameter of 3/16 in and length 3-3/8 in. Made of heat-treated high carbon American steel. Machined specifically for removing spring or roll pins. Made with a hardened point, long shaft. Bar is drop-forged and heated for excellent strength during prying, digging and tamping with hexagon steel construction for enhanced strength. Gooseneck pattern.
Dasco 413-0 Cold Chisel Dasco 431-0 Scratch Awl Vaughan & Bushnell BT90 90 deg Double Ended Pry Bar
Dasco Pro cold chisels are precision ground for cutting, shaping and removing metal that is softer than the cutting edge of the chisel. Made of high carbon steel that has been heat-treated, these chisels are to be used on cast iron, wrought iron, steel, bronze and copper. A handy, economical tool for both the contractor and do-it-yourselfers, the Dasco Pro giant circle beam compass lets you scribe accurate circles up to 10 ft in Dia or larger using a 1/2 in OD dowel rod, PVC or rigid metal tubing as the beam. Heat-treated, stamped 9-1/2 in steel flat bar. Nail slot and sharpened scraper blades. Rust-resistant powder-coated finish.
Wonder Bar 55-515 Flat Pry Bar General Tools 72 Revolving Punch Plier Hyde Tools 45600 Pry Bar/Scrapers 20 16
Get the prying power you need with the 12-3/4 in Wonder Bar? Pry Bar. The strong high-carbon steel hand tool is designed to give you excellent leverage for pulling nails, lifting and scraping. Spring tensioned, self opening tool made of plated steel with cushioned vinyl grip with revolving turret that has six hardened steel punches: 5/64 in, 3/32 in, 7/64 in, 1/8 in, 5/32 in and 3/16 in; used to make tiny holes in leather, plastic, rubber, canvas and other lightweight materials. Use to remove molding, open boxes, scrape paint and pull nails. High-carbon steel hardened and tempered, curved ground scraping end with nail slot. Fits easily into tool boxes or pouches.
Stanley 16-291 Cold Chisel PRY BAR DBL END NAIL PLLR 11IN Stanley 55-818 Ripping Chisel
The 1 in cold chisel is strong and durable. Its hardened, quenched and tempered for long life and strength. With one-piece construction and powder-coated finish this tool is ready for heavy-duty work like chopping through hard, abrasive materials. The Vulcan pry bar nail puller is made from drop-forged steel with hexagon steel construction for enhanced strength. It's a double claws tool and be used for precision nail pulling and prying. Ideal for basic demolition work, the offset pattern ripping chisel allows for side pulling and ripping and has a slotted claw and beveled ends for functionality and performance.
CHISEL COLD 1IN CUT 8IN LGTH  Dasco 417-0 Cold Chisel FatMax 55-101 Wrecking Bar
Cold chisel is ground for cutting, shaping and removing metal that is softer than the cutting edge. The blade and handle are made of chrome alloy steel with 1 in tip and 8 in L. Dasco Pro cold chisels are precision ground for cutting, shaping and removing metal that is softer than the cutting edge of the chisel. Made of high carbon steel that has been heat-treated, these chisels are to be used on cast iron, wrought iron, steel, bronze and copper. The high-carbon steel wrecking bar is quite durable and ideal for heavy demolition jobs. It has a tri-lobe design which provides a secure grip for ease of use as well as a slotted claw and beveled ends for functionality and performance.
DeWalt DWHT58503 4-In-1 Dasco 337-0 Utility Chisel Stanley 55-033 Single Ended Nail Claw
Interchangeable tip for convenience. Hexagonal head prevents rolling and can be used as a standard drill chuck - nail set doubles as drill extension. Knurled locking collar for easy nail release and reversal. Accepts standard screwdriver bits for versatility. Long, beveled tip for easy nail head alignment. Fully hardened, precision-milled steel for long life. Set includes 1/32 in, 2/32 in, 3/32 in and #2 point Phillips nails. Dasco Pro long cold chisels are precision ground for cutting, shaping and removing metal that is softer than the cutting edge of the chisel. Made of high carbon steel that has been heat-treated, these chisels are to be used on cast iron, wrought iron, steel, bronze and copper. Heat-treated for durability with a special extracting claw and a beveled nail slot.
Dasco 410-0 Long Cold Chisel DeWalt DWHT55518 Double Ended Flat Pry Bar ProSource TC031-3 Utility Bars
Dasco Pro long cold chisels are precision ground for cutting, shaping and removing metal that is softer than the cutting edge of the chisel. Made of high carbon steel that has been heat-treated, these chisels are to be used on cast iron, wrought iron, steel, bronze and copper. The 12 in flat bar has a wide prying end for leverage. This bar has multiple nail pullers and point beveled ends for efficient nail removal. The Vulcan utility bar is made from dropped forged steel (hardness for blade HRC 38-42) 6 mm thick. It has a matte black finish and nail slots at both ends offer easy accessibility and leverage.
Vulcan 32942 Wrecking Bars Crescent FB13 Flat Pry Bar General Tools 70079 Utility Center Punch
Bar is drop-forged and heated for excellent strength during prying, digging and tamping with hexagon steel construction for enhanced strength. Gooseneck pattern. Surfaces ground for precision nail pulling and prying resulting in less material damage, high visibility, durable finish helps prevent loss and makes it easy to find the tool on the job-site. Nail slot provides access for improved functionality and nail pulling. Precision tips for fast access and reduced damage to salvaged materials. Radius design increases durability, strength and better prying leverage. Striking pad assists users with penetration and prying. Lightweight aluminum body with alloy steel internal components that provides accurate center punches to prevent drill bits from traveling. One-handed operation. No hammer needed.
Estwing HB-15 Double Ended CHISEL COLD 3PC SET           Stanley 55-116 Double Ended
PRY BAR 15 INCH 18 OZ
Our Price: $15.59
Bar is forged half round, for added strength and less weight with wide, thin blade for easy prying. Features heavy-duty, chrome alloy steel with baked enamel. Includes 3 pieces: (1) 5/16 x 5 in, (1) 5/8 x 6-1/2 in, (1) 3/4 x 7 in chisels. The 8 in molding bar is precise and durable. Its flat striking face allows claw to be driven under deeply embedded nails. With polished flat surface and beveled claws for prying molding and trim, tempered body to help reduce spalling and its forged, high-carbon steel construction, this tool is ideal for removing trim with minimal damage.
Dasco 419-0 Long Cold Chisel BAR PRY W/SHOCKSHIELD 12 IN   Stanley 55-117 Double Ended
Dasco Pro long cold chisels are precision ground for cutting, shaping and removing metal that is softer than the cutting edge of the chisel. Made of high carbon steel that has been heat-treated, these chisels are to be used on cast iron, wrought iron, steel, bronze and copper. Our 12 in Pry Bar has a SHOCKSHIELD? grip for ultimate vibration reduction. This pry bar is designed to withstand the toughest of jobsite conditions while remaining sharp enough to pry, pull and scrape in tight spaces. The claws are induction hardened for added strength, ensuring long lasting sharpness over the life of the tool. The high leverage head of the pry bar is designed for easier prying. Made from tempered, forged high-carbon alloy steel. Flat surface allows users to pry molding and trim reducing material damage, polished, beveled claws for nail pulling and prying.
Stanley 55-114 Double Ended Precision Claw Bar Crescent FB15 Flat Pry Bar Vulcan 32943 Wrecking Bars
The 10 in claw bar is precise and durable. Its flat striking face allows claw to be driven under deeply embedded nails. With polished beveled claws are ideal for precision nail pulling and prying, tempered body to help reduce spalling and its forged, high-carbon steel construction, this tool is ideal for small demolition projects. Surfaces ground for precision nail pulling and prying resulting in less material damage, high visibility, durable finish helps prevent loss and makes it easy to find the tool on the job-site. Nail slot provides access for improved functionality and nail pulling. Precision tips for fast access and reduced damage to salvaged materials. Radius design increases durability, strength and better prying leverage. Striking pad assists users with penetration and prying. Bar is drop-forged and heated for excellent strength during prying, digging and tamping with hexagon steel construction for enhanced strength. Gooseneck pattern.
Estwing HC-10 Single Ended Handy Claw Stanley 16-298 Cold Chisel Set Super Wonder Bar 55-525 Contoured Pry Bar
Estwing's Handy claw is the best tool for getting under and removing nails, with a comfortable vinyl grip. Made of one-piece forged chrome vanadium steel. Hardened, quenched and tempered for long life and safety. Powder coat finish for increased visibility. Set contains 3/8 in, 1/2 in and 5/8 in. Useful for almost any prying, mail pulling, wood-splitting or levering job you are likely to encounter, The WonderBar? is the tool for you.
Vulcan 32944 Wrecking Bars Dasco 606-0 Drift Punch Crescent MB8 Pry Bar
Bar is drop-forged and heated for excellent strength during prying, digging and tamping with hexagon steel construction for enhanced strength. Gooseneck pattern. Made of heat-treated, high-carbon American steel. Features a long, tapered point to aid in aligning and sizing holes in metal and various materials. Strong points and "Target head" render long service. Surfaces ground for precision nail pulling and prying resulting in less material damage, high visibility, durable finish helps prevent loss and makes it easy to find the tool on the job-site. Nail slot provides access for improved functionality and nail pulling. Precision tips for fast access and reduced damage to salvaged materials. Radius design increases durability, strength and better prying leverage. Striking pad assists users with penetration and prying.
FatMax 16-332 Handguarded Cold Chisel 17" OFFSET RIPPING CHISEL     Vaughan & Bushnell BC8 Bear Claw Double Ended Bear Claw Nail Puller
STANLEY Cold Chisel with Guard, 1 in Tip, 1.33 in L Blade, Steel Blade, Rubber Handle, Handle Color: Black/Yellow, 5.11 in Handle, 12 in OAL Drop-forged heat-treated steel construction. Offset, hexagon steel with large capacity extracting claws and combination puller. Used for industrial demolition, ripping out nails, walls, studs and framework. Stock size 2-1/4 in, black oxide finish resists rust and corrosion. Forged, tempered steel with a flat claw for easy wedging and minimal wood damage. Rocker head provides excellent leverage. Rust-resistant powder-coat finish.