Home > ELECTRICAL > ROUGH ELECTRICAL > OUTDOOR BOXES & LAMPHOLDERS
Choose a sub category:
WEATHERPROOF BOXES WEATHERPROOF COVERS WEATHERPROOF LAMPHOLDERS
BOX/COVER GASKETS
Sort By:
Page of 2
Bell Raco 5173-1 Blank Weatherproof Device Cover Bell Raco 5173-2 Blank Weatherproof Device Cover Hubbell 5173-5 Blank Weatherproof Cover
Outdoor use, rugged metallic construction. Powder coat finish. Scratch resistant. Includes installation hardware, gasket and multi-lingual instructions. cULuS/UL listed. NEMA 3R rated. Outdoor use, rugged metallic construction. Powder coat finish. Scratch resistant. Includes installation hardware, gasket and multi-lingual instructions. cULuS/UL listed. NEMA 3R rated. Outdoor use, rugged metallic construction. Powder coat finish. Scratch resistant. Includes installation hardware, gasket and multi-lingual instructions. cULuS/UL listed. NEMA 3R rated.
Hubbell 5173-6 Blank Weatherproof Cover Bell Raco 5173-7 Blank Weatherproof Device Cover Bell 5019-0 Replacement Rectangular Multipurpose Gasket
Outdoor use, rugged metallic construction. Powder coat finish. Scratch resistant. Includes installation hardware, gasket and multi-lingual instructions. cULuS/UL listed. NEMA 3R rated. Outdoor use, rugged metallic construction. Powder coat finish. Scratch resistant. Includes installation hardware, gasket and multi-lingual instructions. cULuS/UL listed. NEMA 3R rated. HUBBELL Replacement Gasket, Polyethylene Foam, Black, 4-5/8 in Length, 2.875 in Width, 1/8 in Thickness, Suitable for: Bell? Weatherproof Covers and Lampholders
Bell 5269-5 Closure Plug Bell 5269-7 Closure Plug Bell 5269-6 Closure Plug
For use with weatherproof boxes, extension adapters, cluster covers and round splice boxes to seal off unused outlets. For use with weatherproof boxes, extension adapters, cluster covers and round splice boxes to seal off unused outlets. For use with weatherproof boxes, extension adapters, cluster covers and round splice boxes to seal off unused outlets.
Hubbell 5374-0 Blank Round Flat Weatherproof Cover Bell 5269-0 Closure Plug Bell Raco 5175-0 Blank Weatherproof Device Cover
For use with 4 in round splice boxes. Installation hardware and gasket included. 4 in Dia, shrink wrapped. UL listed. HUBBELL Closure Plug, 1/2 in Trade, Zinc, Gray, 0.313 in Length, Suitable for: BELL Weather-Proof Boxes, Extension Adapters, Cluster Covers and Round Splice Boxes to Seal Off Unused Outlets For use whenever weatherproof protection is required for a weatherproof box. Rugged die-cast construction. Powder coat finish provides scratch resistance. Includes gasket and mounting hardware. Multi-lingual instructions in each package. UL listed, NEMA 3R Rated. 4-1/2 in x 4-1/2 in.
Bell Raco 5175-1 Blank Weatherproof Device Cover Bell 5270-5 Closure Plug Hubbell 5180-0 Weatherproof Device Cover
For use whenever weatherproof protection is required for a weatherproof box. Rugged die-cast construction. Powder coat finish provides scratch resistance. Includes gasket and mounting hardware. Multi-lingual instructions in each package. UL listed, NEMA 3R Rated. 4-1/2 in x 4-1/2 in. BELL Closure Plug, Weatherproof, 3/4 in Trade, Zinc-Plated, Gray, Suitable for: BELL Weatherproof Boxes, Extensions, Cluster Covers, Round Splice Boxes Horizontal device mount. Weatherproof covers for protection of outdoor receptacles. State-of-the-art powder coat finish provides maximum weatherability and scratch resistance. Self-closing lids assure weatherproof protection when the receptacle is not in use. Includes installation hardware, gasket and multi-lingual instructions. Size: 4-1/2 in x 2-3/4 in. UL 514-A listed, File E195978 CSA C22.2 No. 18 NEMA 3R Rated.
Hubbell 5175-5 Blank Weatherproof Cover Hubbell 5193-0 3-Hole Cluster Lampholder Cover Bell Raco 5193-1 Round Cluster Cover
For use whenever weatherproof protection is required for a weatherproof box. Rugged die-cast construction. Powder coat finish provides scratch resistance. Includes gasket and mounting hardware. Multi-lingual instructions in each package. UL listed, NEMA 3R Rated. 4-1/2 in x 4-1/2 in. For wet locations. Gasket, screws and plugs included. 4 in cluster cover. Use 75 to 150 W maximum, Die-cast zinc. One 1/2 in NPT hole. UL listed. HUBBELL Combination Cover, Round Shape, Metal, Powder-Coated, Gray, 1.094 in Length, 4-1/8 in Width, 4.125 in Height, 4-1/8 in Diameter, 3R NEMA Rating, Includes: (2) Lamp Holders, Gasket, Mounting Hardware
Hubbell 5180-6 Weatherproof Device Cover Bell Raco 5180-1 2-Hole Weatherproof Device Cover Bell Raco 5180-2 2-Hole Weatherproof Device Cover
Horizontal device mount. Weatherproof covers for protection of outdoor receptacles. State-of-the-art powder coat finish provides maximum weatherability and scratch resistance. Self-closing lids assure weatherproof protection when the receptacle is not in use. Includes installation hardware, gasket and multi-lingual instructions. Size: 4-1/2 in x 2-3/4 in. UL 514-A listed, File E195978 CSA C22.2 No. 18 NEMA 3R Rated. Horizontal device mount. Weatherproof covers for protection of outdoor receptacles. State-of-the-art powder coat finish provides maximum weatherability and scratch resistance. Self-closing lids assure weatherproof protection when the receptacle is not in use. Includes installation hardware, gasket and multi-lingual instructions. Size: 4-1/2 in x 2-3/4 in. UL 514-A listed, File E195978 CSA C22.2 No. 18 NEMA 3R Rated. BELL 5180 Weatherproof Flip Cover, 1 Gangs, Aluminum, Powder-Coated, Bronze, 4.563 in Width, 2.813 in Height, 3R NEMA Rating, Device Mounting, Includes: Mounting Hardware, Gasket
Hubbell 5186-0 1-Hole Cluster Lampholder Cover Hubbell 5180-5 Weatherproof Device Cover Bell Raco 5320-1 Weatherproof Box
For wet locations. Gasket, screws and plugs included. Use 75 to 150 W maximum, PAR38 lamps. Die-cast zinc, powder coat finish provides maximum weatherability and scratch resistance. Includes installation hardware, gasket and multi-lingual instructions. One 1/2 in NPT hole. Underwriters Recognized Component CSA C22.2 No. 18 NEMA 3R Rated. Horizontal device mount. Weatherproof covers for protection of outdoor receptacles. State-of-the-art powder coat finish provides maximum weatherability and scratch resistance. Self-closing lids assure weatherproof protection when the receptacle is not in use. Includes installation hardware, gasket and multi-lingual instructions. Size: 4-1/2 in x 2-3/4 in. UL 514-A listed, File E195978 CSA C22.2 No. 18 NEMA 3R Rated. For use in wet, damp or dry locations. Three 1/2 in threaded outlets. 2 in deep with lugs. May be used as a weatherproof junction box or as a housing for receptacles, switches and GFCIs. Powder coat finish. Eight box mounting options with detachable lugs provided. Includes two closure plugs. Ground screw installed. Multi-lingual instructions. Internal threads and hubs comply with NEMA requirements. Hubs accept all threaded fittings and threaded conduit. Die-cast aluminum construction. 18.3 cu-in capacity. 2 in D x 4-1/2 in L x 2-3/4 in W. UL listed. NEMA 3R rated.
Hubbell 5320-0 Outlet Box Bell Raco 5180-7 2-Hole Weatherproof Device Cover Bell Raco 5186 Rectangular Cluster Cover
For use in wet, damp or dry locations. Three 1/2 in threaded outlets. 2 in deep with lugs. May be used as a weatherproof junction box or as a housing for receptacles, switches and GFCIs. Powder coat finish. Eight box mounting options with detachable lugs provided. Includes two closure plugs. Ground screw installed. Multi-lingual instructions. Internal threads and hubs comply with NEMA requirements. Hubs accept all threaded fittings and threaded conduit. Die-cast aluminum construction. 18.3 cu-in capacity. 2 in D x 4-1/2 in L x 2-3/4 in W. UL listed. NEMA 3R rated. Horizontal device mount. Weatherproof covers for protection of outdoor receptacles. State-of-the-art powder coat finish provides maximum weatherability and scratch resistance. Self-closing lids assure weatherproof protection when the receptacle is not in use. Includes installation hardware, gasket and multi-lingual instructions. Size: 4-1/2 in x 2-3/4 in. UL 514-A listed, File E195978 CSA C22.2 No. 18 NEMA 3R Rated. BELL Cluster Cover, Rectangular, Weatherproof, 4.594 in H, Aluminum, Gray, Includes: Mounting Hardware, Gasket
Bell Raco 5186-6 1-Hole Cluster Rectangular Weatherproof Cover Hubbell 5155-5 Single Device Cover Bell Raco 5320-2 Weatherproof Box
For wet locations. Gasket, screws and plugs included. Use 75 to 150 W maximum, PAR38 lamps. Die-cast zinc, powder coat finish provides maximum weatherability and scratch resistance. Includes installation hardware, gasket and multi-lingual instructions. One 1/2 in NPT hole. Underwriters Recognized Component CSA C22.2 No. 18 NEMA 3R Rated. With powder coat finish for weatherability and scratch resistance. For use whenever weatherproof protection is required for an outdoor receptacle. Self-closing lid for weatherproof protection when the receptacle is not in use. Includes installation hardware, gasket and multi-lingual instructions. Size: 4-1/2 in L x 2-3/4 in W x 1-13/32 in D. UL listed, Meets Standard 514A, C22.2 No. 18, (5103 Series) NEMA 3R rated. For use in wet, damp or dry locations. Three 1/2 in threaded outlets. 2 in deep with lugs. May be used as a weatherproof junction box or as a housing for receptacles, switches and GFCIs. Powder coat finish. Eight box mounting options with detachable lugs provided. Includes two closure plugs. Ground screw installed. Multi-lingual instructions. Internal threads and hubs comply with NEMA requirements. Hubs accept all threaded fittings and threaded conduit. Die-cast aluminum construction. 18.3 cu-in capacity. 2 in D x 4-1/2 in L x 2-3/4 in W. UL listed. NEMA 3R rated.
Bell Raco 5193-6 Round Cluster Cover Bell Raco 5193-5 Round Cluster Cover Bell Raco 5197-1 Round Cluster Cover
For wet locations. Gasket, screws and plugs included. 4 in cluster cover. Use 75 to 150 W maximum, Die-cast zinc. One 1/2 in NPT hole. UL listed. For wet locations. Gasket, screws and plugs included. 4 in cluster cover. Use 75 to 150 W maximum, Die-cast zinc. One 1/2 in NPT hole. UL listed. HUBBELL Lampholder Cluster Cover, Round Shape, Metal, Powder-Coated, White, 1.094 in Length, 4-1/8 in Width, 4.125 in Height, 4-1/8 in Diameter, 3R NEMA Rating, Includes: (2) Closure Plugs, Gasket, Multi-Lingual Instructions and Installation Hardware
Hubbell 5197-0 3-Hole Cluster Lampholder Cover Hubbell 5189-0 3-Hole Cluster Lampholder Cover Bell Raco 5189 Rectangular Cluster Cover
For wet locations. Gasket, screws and plugs included. 4 in cluster cover. Die-cast zinc. Three 1/2 in NPT holes. UL listed. Includes installation hardware, gasket and multi-lingual instructions. 3-hole covers are supplied with two closure plugs. Die-cast zinc construction. Three 1/2 in NPT holes. UR - Underwrites recognized component CSA C22.2 No. 18 compliant. Includes installation hardware, gasket and multi-lingual instructions. 3-hole covers are supplied with two closure plugs. Die-cast zinc construction. Three 1/2 in NPT holes. UR - Underwrites recognized component CSA C22.2 No. 18 compliant.
Bell Raco 5197-2 Round Cluster Cover Hubbell 5320-6 Outlet Box Bell Raco 5152-0 Weatherproof Device Cover
For wet locations. Gasket, screws and plugs included. 4 in cluster cover. Die-cast zinc. Three 1/2 in NPT holes. UL listed. For use in wet, damp or dry locations. Three 1/2 in threaded outlets. 2 in deep with lugs. May be used as a weatherproof junction box or as a housing for receptacles, switches and GFCIs. Powder coat finish. Eight box mounting options with detachable lugs provided. Includes two closure plugs. Ground screw installed. Multi-lingual instructions. Internal threads and hubs comply with NEMA requirements. Hubs accept all threaded fittings and threaded conduit. Die-cast aluminum construction. 18.3 cu-in capacity. 2 in D x 4-1/2 in L x 2-3/4 in W. UL listed. NEMA 3R rated. State-of-the-art powder coat finish provides maximum weatherability and scratch resistance. Self-closing lids assure weatherproof protection when the receptacle is not in use. Installation hardware, gasket, multi-lingual instructions included. For single 1.406" diameter receptacle. UL Listed for wet location with cover closed.
Arrow Hart S2962 Weatherproof Cover Hubbell 5324-0 Outlet Box Bell Raco 5606 Lampholder
Tough plastic construction, resistant to high impact and sunlight. Non-corrosive and non-conductive. Gasket provided seals both device openings and edges. Self closing cover. Vertical only. UL listed for wet locations with cover closed. With lugs. Die-cast aluminum. For use in branch circuit wiring in wet, damp or dry locations. May be used as a weatherproof junction box or as housing for receptacles, switches and GFCI's. Eight box mounting options with detachable lugs provided. Three threaded 3/4 in outlets. Powder coat finish. 18.3 cu-in capacity. Two closure plugs included. Ground screws installed. Internal threads and hubs comply with NEMA requirements. Hubs accept all threaded fittings and threaded conduit. 2 in D x 4-1/2 in L x 2-3/4 in W. UL listed. Die cast zinc with porcelain socket. For wet locations. Use 75 to 150 W maximum, PAR-38 lamps. Includes gaskets and locknuts. UL listed.
Bell Raco 5606 Lampholder Hubbell 5606 Adjustable Weatherproof Lampholder Hubbell 5197-6 3-Hole Cluster Lampholder Cover
Die cast zinc with porcelain socket. For wet locations. Use 75 to 150 W maximum, PAR-38 lamps. Includes gaskets and locknuts. UL listed. Die cast zinc with porcelain socket. For wet locations. Use 75 to 150 W maximum, PAR-38 lamps. Includes gaskets and locknuts. UL listed. BELL Electrical Box Cover, Round Shape, Aluminum, Powder-Coated, White, 1.094 in Length, 4-1/8 in Diameter, NEMA 3R NEMA Rating, Wall Mounting, Includes: Gasket and Mounting Hardware
Bell Raco 5189 Rectangular Cluster Cover Bell Raco 5197-5 Round Cluster Cover Hubbell 5189-6 3-Hole Cluster Lampholder Cover
Includes installation hardware, gasket and multi-lingual instructions. 3-hole covers are supplied with two closure plugs. Die-cast zinc construction. Three 1/2 in NPT holes. UR - Underwrites recognized component CSA C22.2 No. 18 compliant. For wet locations. Gasket, screws and plugs included. 4 in cluster cover. Die-cast zinc. Three 1/2 in NPT holes. UL listed. Includes installation hardware, gasket and multi-lingual instructions. 3-hole covers are supplied with two closure plugs. Die-cast zinc construction. Three 1/2 in NPT holes. UR - Underwrites recognized component CSA C22.2 No. 18 compliant.
Bell Raco 5197-7 3-Hole Cluster Round Weatherproof Cover Bell Raco 5320-5 Outlet Box Bell Raco 5320-7 Weatherproof Outlet Box
HUBBELL 5197 Cluster Cover, Round Shape, 1 Gangs, Die-Cast Aluminum, Powder-Coated, Bronze, 1.094 in Length, 4-1/8 in Width, 4-1/8 in Height, 4-1/8 in Diameter, 3R NEMA Rating, Wall Mounting, Suitable for: BELL 1-Gang or Round Weather-Proof Boxes, Includes: (2) Closure Plugs, Gasket, Mounting Hardware For use in wet, damp or dry locations. Three 1/2 in threaded outlets. 2 in deep with lugs. May be used as a weatherproof junction box or as a housing for receptacles, switches and GFCIs. Powder coat finish. Eight box mounting options with detachable lugs provided. Includes two closure plugs. Ground screw installed. Multi-lingual instructions. Internal threads and hubs comply with NEMA requirements. Hubs accept all threaded fittings and threaded conduit. Die-cast aluminum construction. 18.3 cu-in capacity. 2 in D x 4-1/2 in L x 2-3/4 in W. UL listed. NEMA 3R rated. For use in wet, damp or dry locations. Three 1/2 in threaded outlets. 2 in deep with lugs. May be used as a weatherproof junction box or as a housing for receptacles, switches and GFCIs. Powder coat finish. Eight box mounting options with detachable lugs provided. Includes two closure plugs. Ground screw installed. Multi-lingual instructions. Internal threads and hubs comply with NEMA requirements. Hubs accept all threaded fittings and threaded conduit. Die-cast aluminum construction. 18.3 cu-in capacity. 2 in D x 4-1/2 in L x 2-3/4 in W. UL listed. NEMA 3R rated.
Bell Raco 5606 Lampholder Hubbell 5606 Adjustable Weatherproof Lampholder Bell Raco 5406-0 Weatherproof Extension Box
Die cast zinc with porcelain socket. For wet locations. Use 75 to 150 W maximum, PAR-38 lamps. Includes gaskets and locknuts. UL listed. Die cast zinc with porcelain socket. For wet locations. Use 75 to 150 W maximum, PAR-38 lamps. Includes gaskets and locknuts. UL listed. HUBBELL Weatherproof Extension Ring, Aluminum, Gray, Horizontal, Vertical Mounting, 1 in Depth
Arrow Hart S1962W-SP Weatherproof Cover Arrow Hart S1961 Weatherproof Cover Hubbell 5321-0 Outlet Box
Tough plastic construction, resistant to high impact and sunlight. Non-metallic, non-corrosive and non-conductive. Gasket provided seals both device openings and edges. UL listed for damp locations. Stay open lids. Size 2-3/4 in x 4-1/2 in. Resistant to high impact and sunlight. Non-metallic, non-corrosive and non-conductive. Gasket provided seals both device openings and edges. Lid stays open in use. UL listed for damp locations. Constructed of die-cast aluminum. For use in branch circuit wiring in wet, damp or dry locations. May be used as a weatherproof junction box or as a housing for receptacles, switches and GFCIs. Reinforced connector outlets. Powder coat finish. Eight box mounting options with detachable lugs provided. Two closure plugs included. Ground screw installed. Four 1/2 in threaded outlets. Complies with NEMA requirements. Hubs accept all threaded fittings and threaded conduit. Multi-lingual instructions. 2 in depth. 18.3 cu-in capacity. 4-1/2 in L x 2-3/4 in W. UL listed. NEMA 3R rated.
Arrow Hart S1962 Utility Halogen Low Profile Weatherproof Cover Arrow Hart S1961W-SP Weatherproof Cover Bell Raco 5103-0 1-Hole Weatherproof Device Cover
Tough plastic construction, resistant to high impact and sunlight. Non-metallic, non-corrosive and non-conductive. Gasket provided seals both device openings and edges. UL listed for damp locations. Stay open lids. Size 2-3/4 in x 4-1/2 in. Resistant to high impact and sunlight. Non-metallic, non-corrosive and non-conductive. Gasket provided seals both device openings and edges. Lid stays open in use. UL listed for damp locations. Includes installation hardware, gasket and multi-lingual instructions. Weatherproof protection for outdoor receptacle. Powder coat finish for weather. Scratch resistance. Self-closing lid protects receptacle when not in use. C/UL/US NEMA 3R rated. Shrink wrapped.
Bell Raco 5611-0 Replacement Outer Gasket Bell Raco 5103-1 1-Hole Weatherproof Device Cover Bell Raco 5103-2 1-Hole Weatherproof Device Cover
Replacement gasket for Bell lampholders. UL standard CSA certified. Includes installation hardware, gasket and multi-lingual instructions. Weatherproof protection for outdoor receptacle. Powder coat finish for weather. Scratch resistance. Self-closing lid protects receptacle when not in use. C/UL/US NEMA 3R rated. Shrink wrapped. Includes installation hardware, gasket and multi-lingual instructions. Weatherproof protection for outdoor receptacle. Powder coat finish for weather. Scratch resistance. Self-closing lid protects receptacle when not in use. C/UL/US NEMA 3R rated. Shrink wrapped.
Bell Raco 5146-0 1-Hole Weatherproof Device Cover Bell Raco 5321-1 Weatherproof Box Bell Raco 5321-2 Weatherproof Box
Waterproof protection for outside receptacle. Metallic construction, powder coat finish. Scratch-resistant. Self-closing lid when not in use. Includes installation hardware, gasket and multi-lingual instructions. 4-1/2 in L x 2-3/4 in W. C/UL/US UL 514-A listed, File E195978 (5132-5146) CSA C22.2 No. 18 (5132-5146) NEMA 3R rated. Constructed of die-cast aluminum. For use in branch circuit wiring in wet, damp or dry locations. May be used as a weatherproof junction box or as a housing for receptacles, switches and GFCIs. Reinforced connector outlets. Powder coat finish. Eight box mounting options with detachable lugs provided. Two closure plugs included. Ground screw installed. Four 1/2 in threaded outlets. Complies with NEMA requirements. Hubs accept all threaded fittings and threaded conduit. Multi-lingual instructions. 2 in depth. 18.3 cu-in capacity. 4-1/2 in L x 2-3/4 in W. UL listed. NEMA 3R rated. Constructed of die-cast aluminum. For use in branch circuit wiring in wet, damp or dry locations. May be used as a weatherproof junction box or as a housing for receptacles, switches and GFCIs. Reinforced connector outlets. Powder coat finish. Eight box mounting options with detachable lugs provided. Two closure plugs included. Ground screw installed. Four 1/2 in threaded outlets. Complies with NEMA requirements. Hubs accept all threaded fittings and threaded conduit. Multi-lingual instructions. 2 in depth. 18.3 cu-in capacity. 4-1/2 in L x 2-3/4 in W. UL listed. NEMA 3R rated.
Hubbell 5101-6 Weatherproof Device Cover Bell Raco 5321-5 Weatherproof Outlet Box Bell Raco 5324-5 Outlet Box
For outdoor horizontal use. Powder coat finish. Scratch-resistant. Self-closing lid assures protection when receptacle is not in use. Includes installation hardware, gasket and multi-lingual instructions. UL 514-A listed, File E 195978 C/UL CSA C22.2 No. 18 NEMA 3R rated. Constructed of die-cast aluminum. For use in branch circuit wiring in wet, damp or dry locations. May be used as a weatherproof junction box or as a housing for receptacles, switches and GFCIs. Reinforced connector outlets. Powder coat finish. Eight box mounting options with detachable lugs provided. Two closure plugs included. Ground screw installed. Four 1/2 in threaded outlets. Complies with NEMA requirements. Hubs accept all threaded fittings and threaded conduit. Multi-lingual instructions. 2 in depth. 18.3 cu-in capacity. 4-1/2 in L x 2-3/4 in W. UL listed. NEMA 3R rated. With lugs. Die-cast aluminum. For use in branch circuit wiring in wet, damp or dry locations. May be used as a weatherproof junction box or as housing for receptacles, switches and GFCI's. Eight box mounting options with detachable lugs provided. Three threaded 3/4 in outlets. Powder coat finish. 18.3 cu-in capacity. Two closure plugs included. Ground screws installed. Internal threads and hubs comply with NEMA requirements. Hubs accept all threaded fittings and threaded conduit. 2 in D x 4-1/2 in L x 2-3/4 in W. UL listed.
Bell Raco 5101-1 1-Hole Weatherproof Device Cover Bell Raco 5101-0 1-Hole Weatherproof Device Cover Hubbell 5101-5 Weatherproof Device Cover
For outdoor horizontal use. Powder coat finish. Scratch-resistant. Self-closing lid assures protection when receptacle is not in use. Includes installation hardware, gasket and multi-lingual instructions. UL 514-A listed, File E 195978 C/UL CSA C22.2 No. 18 NEMA 3R rated. For outdoor horizontal use. Powder coat finish. Scratch resistant. Self-closing lid assures protection when receptacle is not in use. Includes installation hardware, gasket, and multi-lingual instructions. UL 514-A listed, File E 195978 C/UL CSA C22.2 No. 18  NEMA 3R rated. For outdoor horizontal use. Powder coat finish. Scratch-resistant. Self-closing lid assures protection when receptacle is not in use. Includes installation hardware, gasket and multi-lingual instructions. UL 514-A listed, File E 195978 C/UL CSA C22.2 No. 18 NEMA 3R rated.
Bell Raco 5101-7 1-Hole Weatherproof Device Cover Spot-Gro 5330-0 Weatherproof Box Hubbell 5121-5 Weatherproof Device Cover
For outdoor horizontal use. Powder coat finish. Scratch-resistant. Self-closing lid assures protection when receptacle is not in use. Includes installation hardware, gasket and multi-lingual instructions. UL 514-A listed, File E 195978 C/UL CSA C22.2 No. 18 NEMA 3R rated. With lugs. Die-cast aluminum. For use in branch circuit wiring in wet, damp or dry locations. May be used as a weatherproof junction box or as housing for receptacles, switches and GFCI's. Eight box mounting options with detachable lugs provided. Powder coat finish. 16.5 cu-in capacity. Two closure plugs included. Ground screw installed. Internal threads and hubs comply with NEMA requirements. Hubs accept all threaded fittings and threaded conduit. 2 in D x 4-1/2 in L x 2-3/4 in W. UL listed. Shrink wrapped. For use whenever weatherproof protection is required for an "on/off" type switch. Powder coat finish. Supplied with a switch unassembled to the cover - no need to purchase separate components. Includes installation hardware and multi-lingual instructions. Size 4-1/2 in L x 2-3/4 in W. UL listed, CSA, NEMA 3R Rated.
Bell Raco 5322-0 Weatherproof Box Bell Raco 5101-2 1-Hole Weatherproof Device Cover Hubbell 5361-0 Splice Box
Weatherproof box, with lugs. Five 1/2 in threaded outlets. For use in branch circuit wiring in wet, damp or dry locations. May be used as a weatherproof junction box or as a housing for receptacles, switches and GFCIs. Die-cast aluminum construction. Reinforced connector outlets. Powder coat finish. Eight box mounting options with detachable lugs provided. Two closure plugs included. Ground screw installed. Internal threads and hubs comply with NEMA requirements. Hubs accept all threaded fittings and threaded conduit. Multi-lingual instructions. 2 in D x 4-1/2 in L x 2-3/4 in W. 18.3 cu-in capacity. UL listed. CSA 22.2 No. 18 NEMA 3R Rated. For outdoor horizontal use. Powder coat finish. Scratch-resistant. Self-closing lid assures protection when receptacle is not in use. Includes installation hardware, gasket and multi-lingual instructions. UL 514-A listed, File E 195978 C/UL CSA C22.2 No. 18 NEMA 3R rated. For use in branch circuit wiring in wet, damp or dry locations. Designed for use as a weatherproof junction box and used with BELL round cluster covers and round lamp holder combinations. Die-cast aluminum construction. Powder coat finish. Reinforced connector outlets. Cast-in mounting lugs, four closure plugs included and installed ground screw. 16.1 cu-in capacity. Six 10-24 tapped holes. 4 in Dia x 1-1/2 in D. UL listed.
Bell Raco 5331-0 Weatherproof Box Bell Raco 5146-5 Weatherproof Device Cover Bell Raco 5121-1 Weatherproof Switch Cover
With lugs. Die-cast aluminum. For use in branch circuit wiring in wet, damp or dry locations. May be used as a weatherproof junction box or as housing for receptacles, switches and GFCI's. Eight box mounting options with detachable lugs provided. Five 3/4 in threaded outlets. Powder coat finish. 18.3 cu-in capacity. Two closure plugs included. Ground screws installed. Internal threads and hubs comply with NEMA requirements. Hubs accept all threaded fittings and threaded conduit. 2 in D x 4-1/2 in L x 2-3/4 in W. UL listed, CSA Approved and NEMA 3R Rated. Waterproof protection for outside receptacle. Metallic construction, powder coat finish. Scratch-resistant. Self-closing lid when not in use. Includes installation hardware, gasket and multi-lingual instructions. 4-1/2 in L x 2-3/4 in W. C/UL/US UL 514-A listed, File E195978 (5132-5146) CSA C22.2 No. 18 (5132-5146) NEMA 3R rated. For use whenever weatherproof protection is required for an "on/off" type switch. Powder coat finish. Supplied with a switch unassembled to the cover - no need to purchase separate components. Includes installation hardware and multi-lingual instructions. Size 4-1/2 in L x 2-3/4 in W. UL listed, CSA, NEMA 3R Rated.
COVER 1G VERTICAL WP GFCI GRAY Hubbell 5361-6 Splice Box RECPTCL/CVR DPLX HRZ WP GRY 1G
Includes installation hardware, gasket and multi-lingual instructions. Weatherproof protection for outdoor receptacle. Powder coat finish for weather. Scratch resistance. Self-closing lid protects receptacle when not in use. C/UL/US NEMA 3R rated. Shrink wrapped. For use in branch circuit wiring in wet, damp or dry locations. Designed for use as a weatherproof junction box and used with Bell round cluster covers and round lamp holder combinations. Die-cast aluminum construction. Powder coat finish. Reinforced connector outlets. Cast-in mounting lugs, four closure plugs included and installed ground screw. 16.1 cu-in capacity. Six 10-24 tapped holes. 4 in Dia x 1-1/2 in D. UL listed. TAYMAC Weatherproof Cover, Aluminum, Gray, 4-9/16 in Length, 2-13/16 in Width, 3R NEMA Rating, Horizontal Mounting, Includes: Gasket, Installation Hardware
Bell Raco 5361-2 Splice Box Bell Raco 5361-1 Single Ended Splice Box Carlon E98DHGN-CAR Weatherproof Cover
For use in branch circuit wiring in wet, damp or dry locations. Designed for use as a weatherproof junction box and used with Bell round cluster covers and round lamp holder combinations. Die-cast aluminum construction. Powder coat finish. Reinforced connector outlets. Cast-in mounting lugs, four closure plugs included and installed ground screw. 16.1 cu-in capacity. Six 10-24 tapped holes. 4 in Dia x 1-1/2 in D. UL listed. For use in branch circuit wiring in wet, damp or dry locations. Designed for use as a weatherproof junction box and used with Bell round cluster covers and round lamp holder combinations. Die-cast aluminum construction. Powder coat finish. Reinforced connector outlets. Cast-in mounting lugs, four closure plugs included and installed ground screw. 16.1 cu-in capacity. Six 10-24 tapped holes. 4 in Dia x 1-1/2 in D. UL listed. Non-conductive, corrosion resistant and paintable for safe installation and operation in wet or damp locations. NEMA 3R rated and UL listed.
Bell Raco 5141-0 Weatherproof Switch Cover Hubbell 5361-5 Splice Box Bell Raco 5361-7 Splice Box
Weatherproof protection for an "on-off" type switch. Vertical, mounted to device. Rugged die-cast construction, powder coat finish. Self-closing lid assures weatherproof protection when not in use. Supplied with a switch - no need to purchase separate components. Switch is unassembled to the cover. UL, CSA and NEMA 3R rated. Shrink wrapped. For use in branch circuit wiring in wet, damp or dry locations. Designed for use as a weatherproof junction box and used with Bell round cluster covers and round lamp holder combinations. Die-cast aluminum construction. Powder coat finish. Reinforced connector outlets. Cast-in mounting lugs, four closure plugs included and installed ground screw. 16.1 cu-in capacity. Six 10-24 tapped holes. 4 in Dia x 1-1/2 in D. UL listed. For use in branch circuit wiring in wet, damp or dry locations. Designed for use as a weatherproof junction box and used with Bell round cluster covers and round lamp holder combinations. Die-cast aluminum construction. Powder coat finish. Reinforced connector outlets. Cast-in mounting lugs, four closure plugs included and installed ground screw. 16.1 cu-in capacity. Six 10-24 tapped holes. 4 in Dia x 1-1/2 in D. UL listed.