|
|
|
|
|
|
|
|
|
|
|
|
|
|
For home, auto and marine applications.
|
For home, auto and marine applications.
|
For home, auto and marine applications.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
For home and auto applications.
|
These Gardner Bender 30 A battery clamps (2-PK) are coated in highly conductive copper for excellent performance. Each has a color-coded covering on the handle.
|
Twin probe circuit tester tests AC/DC voltage from 80 to 250 VAC/VDC. The neon indicator glows when voltage is present and brightens as voltage increases. Offers insulated housing and test leads for safety. Built-in pocket clip for added convenience. Tests DC motors, switches and outlets.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Replacement leads for Gardner Bender meters GMT-12A, GMT-18A. UL recognized. Tough ABS plastic. Flexible cords for easy use.
|
For testing electric circuits from 90 to 600 volt. Detects presence of power on either AC or DC circuits. Identifies circuit conductors.
|
This tool cuts copper and aluminum solid or stranded wire. Rotate the cam wheel adjustment to strip appropriate 10 to 24 AWG wire. Holes in the side of the jaws are intended for looping solid wire. Compact tool adjusts quickly to any of eight wire sizes.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
This low voltage tester tests for AC/DC Voltage from 5 to 50 VAC/VDC, 50 to 60 Hz. The indicator glows when voltage is present and brightens as voltage increases. Applications include testing low volt outdoor lighting, low volt control panels, doorbells, alarm systems and automotive 12 VDC and 36 VDC.
|
Slits outer covering of all sizes, both old and new, non-metallic (type NM) sheathed cable.
|
Strips UTP and STP cable up to 0.24 in (6.2 mm) OD. Tension release lever, compact design. For use on CAT 3 and CAT 5 cable. Carded.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
The ProSource cable crimper with cushion grip handle can cut and strip wires, crimps ignition terminals. This clamper has easy-to-read wire size markings.
|
Heavy-duty 3-way voltage tester tests AC/DC voltage at 120, 240 and 277 V. Individual indicators for each voltage range assures reliability. 24 in test lead is long enough for convenient testing. Unit is both durable and compact. Testing applications include outlets, panels, light fixtures, switches, circuit breakers and more.
|
The continuity tester is very easy-to-use and is used to test for breaks in non-energized wires or cords. Continuity has a bright 360 deg visual indicator located near the tip along with a flexible lead for ease of use.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
This handy standard receptacle tester features a compact, comfortable, contoured design with neon indicators that display positive indication of circuit status. Compact unit simply plugs into any standard 3-wire/grounded receptacle (110 to 125 VAC circuits) and a succession of yellow and red lights provides indication of circuit status or specifies wiring errors. Lamps reveal 5 common wiring errors including open ground, open neutral, open hot, hot/ground reverse, hot/neutral reverse, as well as correct wiring. Easy to read status chart displayed on both top and bottom of the tester for multiple position viewing. Designed for use on standard outlets and extension cords.
|
Heavy cream-like paste. Slides on smoothly and clings throughout the pull. Excellent abrasion protection and cling ability, repels water to some extent. Modified wax base formula dries to a slippery film. Greaseless, non-toxic, will not stain skin, clothing or construction trim, cleans up with soap and hot water. Withstands normal temperature extremes and will not dry out in the container. Remains stable with 3 freeze-thaw cycles. Non-combustible, non-conductive and non-corrosive. Will not damage conduit or insulation. Suitable for fiber-optic wire. Yellow color. In a squeeze bottle. UL listed.
|
Safety is the number one priority on any jobsite. Gardner Bender's testing equipment can be put to good use ensuring that electrical equipment is properly installed and safe to operate. The condition of electrical installations can be established when contractors use test equipment. Any test unit that can be used to measure or review an application without coming in contact with a live conductor is a necessity. Testing equipment can be put to good use ensuring that electrical equipment is properly installed and safe to operate. Faulty installations can be lethal, the condition of electrical installations can be established when contractors use test equipment. Gardner Bender is pleased to offer an innovative full feature line of test equipment designed to make electrical work faster and safer.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Mr. LongArm bulb changers are the smart way to change light bulbs. The spotlight bulb changer attaches to an extension pole and allows the user to remove and replace bulbs quickly and easily, while standing safely on the ground.
|
Mr. LongArm bulb changers are the smart way to change light bulbs. The floodlight bulb changer attaches to an extension pole and allows the user to remove and replace bulbs quickly and easily, while standing safely on the ground.
|
Tests ground fault receptacles by overloading circuit and tripping GFCI. Tests for ground fault interruption, open ground, open neutral, open hot, hot/ground reverse, hot/neutral reverse and correct wiring.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
This multi-purpose tool can be used to cut, strip, crimp, cut and rethread bolts. Features an ergonomic cushioned handle design, hardened steel cutting blades that provide strength and durability and a wire strip length gauge.
|
Replacement leads for meters. Tough ABS construction. Flexible cords for easy use. Double insulated with removable caps for safety. Slip resistant and comfortable handling. Universal fit with most meters. CAT3 1000V, 40" length.
|
The ProSource wire stripper is made of rust-resistant steel with a cushioned vinyl grip. The stripper has easy-to-read wire size markings.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Testing for voltage to any electrical project is important for your safety. This compact multi-purpose unit makes it easy with a combination voltage probe and continuity tester built into a single unit with a convenient screwdriver tip designed for quick faceplate removal. Its compact size fits easily into a pocket or tool box for retrieval as needed. Use to test outlets, fuses, switches, electronics, extension cords, light fixtures and low voltage lighting circuits.
|
Testing equipment can be put to good use ensuring that electrical equipment is properly installed and safe to operate. Faulty installations can be lethal. The condition of electrical installations can be established when contractors use test equipment. Gardner Bender is pleased to offer an innovative full feature line of test equipment designed to make electrical work faster and safer.
|
Strips solid or stranded wire. Compact, adjusts to eight wire sizes. Hardened spring steel. Looping hole bends, loops wire for termination on screws. Also includes spring return for easy handling.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Design makes fast, clean cuts. Cuts flexible, water-tight flexible and PVC conduit 1/2 in to 1 in. Reversible cutting blade, lightweight nylon handles, compact 8 in tool fits neatly in pocket or tool pouch.
|
The locknut wrench has been designed to end frustration. This ideal tool for locknut operation fits the majority of UL locknuts and features a thin profile that makes those normally tight spaces a thing of the past. It can be used to loosen or tighten a locknut by rotating the wrench in the direction of the arrows marked on both ends.
|
Hand tools are a part of every toolbox. With exclusive features for safety, durability, reliability and life strength, Gardner? Bender hand tools offer excellent performance on every job. Whether you need cutters, crimpers, strippers and pliers. Gardner? Bender has the ideal tool to complete your electrical tool set. These pliers are a excellent multi-use tool with a built-in crimper for making wire connections. They easily cut solid/stranded copper core and aluminum core wire. The built-in crimper is designed to crimp non-insulated, vinyl and nylon insulated, as well as ignition terminals. With a wide array of outstanding features, this is an essential pliers for every toolbox. Forward thinking design concepts ensure product usefulness for generations to come.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Drill/tap high-speed steel bit, split point with web thinning. High-quality hex shank to ensure strong connection to drill chuck. Complete hole drilling, tapping and deburring or countersinking in one operation with power drill. Designed to tap up to 10 ga metal. Back taper or deburr or countersink beyond tap to prevent thread damage from over-drilling.
|
Drill/tap high-speed steel bit, split point with web thinning. High-quality hex shank to ensure strong connection to drill chuck. Complete hole drilling, tapping and deburring or countersinking in one operation with power drill. Designed to tap up to 10 ga metal. Back taper or deburr or countersink beyond tap to prevent thread damage from over-drilling.
|
Shorter for better access to tight spaces between studs and joists, will drill 2 ft and 4 ft joists. Self-feeding screw point draws bit through all wood types. Replaces special tools such as right angle drills and eliminates multiple steps to cut the hole to size. Overall length 4.5 in (144 mm) weight 0.3 lb. (118 g). 1/4 in hex. Over center single flute design for cleaner holes and less splintering. Marked with bit diameter and catalog number on shank for easy identification. Not for use in wood with nails.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Drill/tap high-speed steel bit, split point with web thinning. High-quality hex shank to ensure strong connection to drill chuck. Complete hole drilling, tapping and deburring or countersinking in one operation with power drill. Designed to tap up to 10 ga metal. Back taper or deburr or countersink beyond tap to prevent thread damage from over-drilling.
|
Drill/tap high-speed steel bit, split point with web thinning. High-quality hex shank to ensure strong connection to drill chuck. Complete hole drilling, tapping and deburring or countersinking in one operation with power drill. Designed to tap up to 10 ga metal. Back taper or deburr or countersink beyond tap to prevent thread damage from over-drilling.
|
Drill/tap high-speed steel bit, split point with web thinning. High-quality hex shank to ensure strong connection to drill chuck. Complete hole drilling, tapping and deburring or countersinking in one operation with power drill. Designed to tap up to 10 ga metal. Back taper or deburr or countersink beyond tap to prevent thread damage from over-drilling.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Drill/tap high-speed steel bit, split point with web thinning. High-quality hex shank to ensure strong connection to drill chuck. Complete hole drilling, tapping and deburring or countersinking in one operation with power drill. Designed to tap up to 10 ga metal. Back taper or deburr or countersink beyond tap to prevent thread damage from over-drilling.
|
Gardner Bender's innovative mini cable snake is an ultra-compact 15 ft fishtape for installing a variety of wire and cable including electrical wire, speaker wire and network cable over short runs inside walls and ceilings.
|
The Gardner? Bender GS-355 wire stripper/cutter will cut and strip stranded core wire from 20 to 10 ga or solid core wire from 10 to 18 ga This tool has precision ground cutting edges and a pliers nose for pulling and looping finished wire.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Zenith Coax Crimping Tool, Wire Type: Coaxial Cable, Wire Size: RG6, RG59, Handle Color: Black
|
These pliers that can be used to strips solid or stranded wire feature a locking mechanism and spring return.
|
Curved cutting blade, strips and cuts copper and aluminum wire, solid or stranded, 10 to 22 AWG. Precision ground-stripping stations prevent nicking conductor while stripping. Cuts and rethreads bolt sizes 4-40, 5-40, 6-32, 8-32, 10-24 and 10-32. Pliers nose for pulling and looping wire. Crimps insulated and non-insulated terminals. Crimps coaxial F connectors.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
GB Electrician's Screw Kit, Thread Size: #8-32, Head Type: Round, Drive Type: Phillips, Package Quantity: 5 lb, Silver, Includes: (20) 2/3 in, (20) 7/8 in, (20) 1 in, (20) 1-1/4 in, (20) 1-5/8 in, (20) 2 in Phillips Head Screws
|
For high-leverage. Cuts up to 3/8 in Dia cable. Crimps RG-58, RG-59 and RG-6 F-style connecters. Cushioned grips.
|
"Strips insulation from coax cable. 3.87"" height x 1.25"" width x .75"" depth."
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Ergonomic high leverage grips for maximum torque, molded and insulated shaft rated to 1000 V for protection when working with electricity. Hardened chrome vanadium steel, with magnetic tips. Two-piece set includes SCE-3252 #2 Phillips tip and SCE-3256 3/16 in slotted tip. Carded packing.
|
A non-contact voltage tester serves as a key component in any electrical toolkit, allowing the user to verify the presence of AC voltage prior to working on an electrical installation or during troubleshooting without requiring physical contact with live electrical conductors. The Gardner Bender GVD-3504 Circuit Alert non-contact voltage tester features both audible (beeping) and visual (360 deg flashing red light) indicators to alert the user of the presence of AC voltage from 50 to 600 V. Use to locate breaks in wires and voltage at outlets, circuit breaker panels, light fixtures, switches and motors. Quickly locates the hot terminals in receptacles. Fully insulated probe tip eliminates the risk of contacting live electrical wires. Built-in patented safe test feature ensures tester and batteries are working properly. The unit includes a pocket-clip for secure portability.
|
Testing equipment can be put to good use ensuring that electrical equipment is properly installed and safe to operate. Faulty installations can be lethal; the condition of electrical installations can be established when contractors use test equipment. Pocket sized analog tester. Tests voltage, DC voltage, DC current, resistance, continuity and batteries.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Contains assorted sizes and lengths of commonly used electrical screws. Screws are #6 to 32, ranging from 3/4 to 3in L.
|
Multi-tool strips and cuts wire from 10 to 22 AWG. Pliers style nose allows pulling and looping wire. Bolt cutter leaves ideal lead thread. Induction hardened cutting edge. Wire crimper for insulated and non-insulated terminals. Meets or exceeds all ANSI standards.
|
Bussmann cartridge fuse pullers are heavy-duty tools for safely removing fuses from their blocks.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Contains 100 anchors, 100 screws and a 1/4 in masonry drill bit. For use in concrete, block, tile and brick. Moisture and chemical resistant, for indoor or outdoor use.
|
Wire gauge markings on both sides, cuts, strips and loops wire. Wide handles with cushion ridges designed for comfort. Spring-loaded action returns handles to open position. Narrow nose fits into tight places. Made of hardened steel with precision-ground stripping holes. Black oxide finish. No. 11045 strips solid wire AWG. No. 11046 strips stranded wire.
|
Electricians demand precision and reliability. That's why they choose CHANNELLOCK? wire strippers. Accurate and easy cuts from a legendary tool maker- CHANNELLOCK?.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Tempered carbon steel blade and screwdriver.
|
The Gardner? Bender GS-361 wire stripper/cutter will cut and strip stranded core wire from 30-16. This tool has precision ground cutting edges and a pliers' nose for pulling and looping finished wire. The laser-etched markings ensure the markings won't rub off after continued use.
|
GB Wrench Set, Locknut, Steel, Number of Pieces: 3, Includes: 1/2 in , 3/4 in and 1 in Wrenches
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Wire gauge markings on both sides, cuts, strips and loops wire. Wide handles with cushion ridges designed for comfort. Spring-loaded action returns handles to open position. Narrow nose fits into tight places. Made of hardened steel with precision-ground stripping holes. Black oxide finish. No. 11045 strips solid wire AWG. No. 11046 strips stranded wire.
|
This handy multi-purpose nm cable stripper/cutter is able to strip both 12/2 and 14/2 AWG nm cable and 12-14 AWG single conductor cables in one tool. Designed with user comfort and convenience in mind this tool offers a power spring handle return to reduce hand fatigue and a locking handle for compact storage. The curved cutting blade makes for easy stripping and cutting while the built in wire looping holes and pliers nose for gripping wire make almost any electrical job a snap. Tool also incorporates the ability to cut and rethread bolts size 6-32 and 8-32. You'll find yourself reaching for this non-metallic cable stripper/cutter again and again.
|
Shorter for better access to tight spaces between studs and joists, will drill 2 ft and 4 ft joists. Self-feeding screw point draws bit through all wood types. Replaces special tools such as right angle drills and eliminates multiple steps to cut the hole to size. Overall length 4.5 in (144 mm) weight 0.3 lb. (118 g). 1/4 in hex. Over center single flute design for cleaner holes and less splintering. Marked with bit diameter and catalog number on shank for easy identification. Not for use in wood with nails.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Plier nose for pulling and looping wire. Scissor-type cutting blade. Ergonomic-shaped handles. Cuts and strips both solid and stranded wire. Spring automatically spreads handles. Slide lock. Wire sizes embossed in metal. Dimensions 6 in/152 mm, minimum/maximum strip AWG 20 to 10, 0.8 to 2.6 mm.
|
Gardner Bender's GUSB-3450 USB multimeter is used to confirm USB port voltage and current and check chargers, cables and USB ports. The tester features a high-impact housing and a pocket clip. Measure current draw, measure performance of solar USB chargers and test for proper wiring and polarity. The easy to understand display alternates between volts and amps. Features a 1 year warranty.
|
Replacement blade for Greenlee 0952-01 or 1940 flexible metal conduit cutter.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
A non-contact voltage tester serves as a key component in any electrical toolkit, allowing the user to verify the presence of AC voltage prior to working on an electrical installation or during troubleshooting without requiring physical contact with live electrical conductors. Engineered to specifications required by professional electricians the Sperry Instruments VD6509 adjustable non-contact voltage detector allows for sensitivity adjustments in multiple-wire applications when precision and safety are crucial. This unit features an adjustable sensitivity dial able to detect the presence of AC Voltage from as low as 12 V to up to 1000 V AC and provides both audible (beeping) and visual (360 deg flashing red light) indicators to alert the user of the presence of voltage. It also includes a built-in flashlight. The fully insulated probe tip eliminates the risk of contacting live electrical wires while the patented battery check feature designed into the unit ensures tester and batteries are operating properly, virtually eliminating false negative readings. This unit features 250 lb crush rated impact-resistant ABS housing to withstand tough worksite applications while the design ensures a positive user experience over long hours of repeated use. Applications include testing doorbells, low voltage lighting, security system wires, AC energized wires, quickly locating hot terminals in receptacles, pinpointing breaks in wires and detecting the absence/presence of voltage at outlets, circuit breaker panels, light fixtures, switches and motors. The unit includes a pocket-clip for secure portability. Tester is cETLus Listed, CE Certified, CAT III 1000V/IV 600 V rated and includes a limited lifetime warranty. Operates from a single AAA battery (included). Frequency 50 to 60 Hz.
|
Electricians demand precision and reliability. That's why they choose CHANNELLOCK? wire strippers. Accurate and easy cuts from a legendary tool maker - CHANNELLOCK?.
|
This indispensable household tester kit includes the most commonly used testers to test voltage, GFCI receptacles, batteries and USB ports. The voltage tester allows the user to verify the presence of AC voltage prior to working on an electrical installation or during troubleshooting without requiring physical contact with live electrical conductors. The included GFCI receptacle tester detects common wiring problems in standard and GFCI protected outlets. Simply plug it in and view the light pattern on the tester to determine if it's correct, open ground, open neutral, open hot, hot/ground reverse or hot/neutral reverse. Tester works on 110 to 125 VAC receptacles only and will not indicate quality of ground. The battery tester tests common household battery types (AA, AAA, C, D and 9 V batteries) to determine existing charge. Finally, the USB tester can check USB ports for the presence of voltage and test for proper wiring and polarity. Simply plug it into a USB port and the indicator bulb will glow a certain color to tell you the condition of the USB port.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
When you're ready to add a multimeter to your toolbox this unit is a great place to start. This tester is designed to work on most household appliances and is equipped with an easy to read 3-1/2 in digital display and three testing functions - AC voltage to 500 V, DC voltage to 600 V and resistance to 2 mOhm. The 11 position manual ranging smooth rotary style achieves precise readings and the low battery indicator ensures an accurate read-out. Durable housing is drop-resistant to 3 ft and crush-rated to 150 lb. Tester is rated Cat III 600 V. Unit comes pre-packaged with secure-fitting 26 in test leads and operating instructions.
|
Gardner Bender Ugly's Electrical References Revised 2017 Edition is a helpful guide for the professional electrician and electrical minded weekend warrior. The book includes common mathematical formulas and specific rules and regulations from the National Electric Code. The easy to understand format makes it an ideal resource for double checking commonly used equations. Keep on hand as a quick reference for on the job applications.
|
This wire stripper/cutter features six stripping holes and a shear-cutting knife to handle 8 to 18 AWG solid and 10 to 20 AWG stranded wire, plus shearing holes for 6 to 32 and 8 to 32 bolts. Longer hand grip coverage provides a more comfortable grip while the updated lock tucks nicely out of the way. The narrow head design allows this tool to easily get into tight places.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
For telecom and electrical applications. Strong, tough tempered steel with nickel-plated finish. Upper blade has notches for stripping 19 AWG and 23 AWG wire. Scraper and file on outside of both blades. Serrated lower blade reduces slippage. 5-1/4 in length, 0.20 lb.
|
Poly line, 210 lb. average breaking strength, can be blown into conduit and then used to pull in a larger pulling rope or it can be used directly to pull in smaller wires. Can be used directly from the container with power fishing systems. Resists tangling when dispensing. Prepunched hole for dispensing the line. Rot and mildew-resistant.
|
Milwaukee? 6 in 1 combination pliers feature a revolutionary, forged dual head design for wire stripping and needle nose functionality. A unique reaming design is integrated into the pliers head for smoothing out rough edges of metal pipe and a curved blade design allows for clean cuts through larger wire sizes. These pliers have the capability to cut #6 and #8 bolts and feature a swing-lock design for fast one-handed operation and won't open when stored in a pouch or backpack. Milwaukee? 6-in-1 combination pliers deliver maximum productivity for the trades. The Milwaukee? 48-22-3079 is ideal for the toughest of jobsites. Milwaukee? stands behind their product and offers a limited lifetime warranty with all combination pliers.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
A non-contact voltage tester serves as a key component in any electrical toolkit, allowing the user to verify the presence of AC voltage prior to working on an electrical installation or during troubleshooting without requiring physical contact with live electrical conductors. Engineered to specifications required by professional electricians the Sperry Instruments VD6508 non-contact voltage detector features both audible (beeping) and visual (360 deg flashing red light) indicators to alert the user of the presence of AC voltage from 50 to 1000 V. It also includes a built-in flashlight. The fully insulated probe tip eliminates the risk of contacting live electrical wires while the patented battery check feature designed into the unit ensures tester and batteries are operating properly, virtually eliminating false negative readings. This unit features 250 lb crush-rated impact-resistant ABS housing to withstand tough applications while the design ensures a positive user experience over long hours of repeated use. Applications include quickly locating hot terminals in receptacles, pin pointing breaks in wires and detecting the absence/presence of voltage at outlets, circuit breaker panels, light fixtures, switches and motors. The unit includes a pocket-clip for secure portability. Tester is cETLus Listed, CE Certified, CAT III 1000V/IV 600V rated and includes a limited lifetime warranty. Operates from a single AAA battery (included). Frequency 50 to 60 Hz.
|
Electricians demand precision and reliability. That's why they choose CHANNELLOCK? wire strippers. Accurate and easy cuts from a legendary tool maker- CHANNELLOCK?.
|
The ProSource wire stripper can strip 10 to 24 AWG copper or aluminum wire, solid or stranded, cuts wire (HRC 40-50), crimps 10 to 22 AWG insulated, 4 to 22 AWG non-insulated and 7 to 8 mm ignition terminals. The micro adjustable knob allows wire smaller than 24 AWG to be stripped. The wire stripper has easy-to-read wire size markings.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
GB Conduit Bender Handle, 3/4 in, Aluminum, 38 in L
|
The Strip-Easy automatic wire stripper is an ideal choice for stripping solid or stranded wire. The spring-loaded stripper automatically removes wire insulation on 22-8 ga wires without crushing the ends. It has a comfortable, no-slip plastic handle that helps to secure a firm hand grip during use.
|
Keyhole saw with integrated blade and ergonomic handle design provides maximum strength. Hardened steel blade with clog-free teeth, handle with non-slip grip. Pointed tip easily punches through drywall. Blade cuts on both on push and pull strokes. Hole in handle for lanyard or convenient storage. Tool is not insulated. Overall length of 11-5/8 in.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
For pulling single wire, cable or fish tape through walls. Clip attaches to hole in bit, mesh basket holds wire or cable during recovery, swivel reduces twisting.
|
Cuts and strips wire. Narrow, serrated pliers nose to pull, loop and bend wire. Long, curved cutting blade. Cutters and strippers are in front of the pivot for maximum ease of use in reaching into tight places. Crimps insulated and non-insulated terminals and 7 to 8 mm ignition terminals, cleanly shears bolts. Use on bolt sizes 4-40, 5-40, 6-32, 8-32, 10-32, 10-24, strips and cuts 10 to 22 AWG, connectors 10 to 22 ga Cushioned handles for comfort.
|
This multifunctional analog multimeter was designed for the homeowner, hobbyist or professional needing to make electrical and electronic equipment measurements. Capable of measuring 6 functions on 14 ranges on it is easy to read color-coded analog display you'll find yourself reaching for this handy unit almost every time. Unit tests AC and DC voltage of 10-50-250 and 500 V, DC current 250 mA, up to 50K of resistance, -20 to +56 dB decibels on AC voltage ranges and common household batteries from 1.5 V thru 9 V. Unit includes built-in 0 Ohm adjustment dial allowing you to reset prior to resistance testing and to perform internal battery test function. Unit incorporates fuse overload protection circuitry to protect the user and a mirror scale is provided to reduce the possibility of parallax errors. Ships with test leads and a tri-lingual instruction manual and includes a 1 year warranty. Common measurements with this unit include - testing household batteries for charge level, troubleshooting various low voltage circuits, testing wall receptacles for proper voltage and grounding and troubleshooting electrical cords, stings of lights, fuses and switches to determine if they are operating properly or if a break in the circuit exists and the item in question needs to be repaired or replaced. The decibel feature of this multimeter is used for transistor gain measurement in electronic circuits and should not be confused with audio decibels.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
The stop shock II circuit analyzer makes it easy to test gfci receptacles and determine the appropriate wiring correction needed. This GFCI tester uses advanced circuitry and a patent-pending proprietary design to precisely detect the required low resistance (less than 10 Ohms) on ground wire and provides a clear and easy-to understand single led readout indication for correct wiring or bad ground, open neutral, hot/gnd reverse, hot/neu reverse and open hot wiring errors without the need to memorize or decipher a dual-indication chart. The stop receptacles require GFCI test function to test outlets wired in parallel to GFCI circuits (bathroom, kitchen and outdoor receptacles require GFCI protection). Designed for the jobsite this tester features hi-impact abs housing with a 250 lb crush rating and the ability to withstand drops of up to 10 ft.
|
Designed specifically for DIY occasional use, this 50 ft tape is made of standard steel material and makes quick work of most wiring projects, pulling wire through conduit or framing.
|
GB's BigBen aluminum hand bender has improved traditional hand benders by enlarging the hook with a 5X durability factor, increasing the foot pedal size and clearance by 40%, highlighting the markings and incorporating a dual sight-line system for bending on the floor or in the air. Includes industry standard markings to simplify the job. Made of rugged, heat-treated aluminum and backed by a lifetime warranty. Package includes bender head only. Also available with handle (Model #960H). Other head sizes available are 1 in (Model #962) and 3/4 in (Model #961). Bender handle available separately (Model #BH-75 - 3/4 in NPT x 38 in long). Includes a detailed hand bending manual which clearly illustrates various bends and how to achieve them including the mathematical formulas to complete more complicated bends.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
This compact and easy-to-use coaxial cutter and stripper adjusts easily to various cable thickness. Designed with a reversible v-block for different cables; RG-6 = 6, RG-58 = 8, RG-59 = 9 and RG-174 = D. This tool will both cut and strip the cable. Simply choose the correct cable size, adjust the blade depth and then insert the cable until it reaches the guide and rotate 1 - 4 times. Pull the tool straight out to remove the insulation. Designed with quick 1 squeeze cutting and measuring only 6-1/4 in long for compact storage. Comfortable in the hand and easily stored you'll be happy to have this tool on hand for all your coax installation needs.
|
Two wire cutters. Crimps 7 to 8 mm insulated and non-insulated terminals, lugs and splices. Cuts and strips stranded wire, shears bolts. Pivot nut adjusts tension. Full-sized, plastic-covered cushioned handles. Cuts bolt of size 4 to 40, 6 to 32, 8 to 32, 10 to 24 and 10 to 32. Strips and cuts wire sizes 10 to 26 AWG stranded (4 to 0.14 mm) and 8 to 22 AWG solid (6 to 0.34 mm). Red handle of length 8-1/2 in and weight 0.47 lb.
|
The Gardner? Bender modular plug crimp tool is used to produce patch cable and handset cables, cut, strip and crimp.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
ArmorEDGE NM cable stripper by Gardner Bender is designed to strip #12 and #14 solid wire, 12/2 and 14/2 nm cable and cut and rethread bolt sizes 6-32, 8-32 and 10-32. Envisioned to provide the user with the ultimate comfort and control these strippers offer 7-1/4 in symmetric ergonomic cushioned handles with dual gripping positions for traditional or forward hand positions coupled with a coiled spring action return to reduce job-fatigue. Easy to read laser-etched markings make it a snap to choose the right groove for the application while the stainless steel body and double bevel cutting blades offer superior corrosion and nick resistance. Wire looping holes strategically integrated into the blades allow the user to quickly loop wire ends to fit on screw terminals and the serrated plier nose makes quick work of grasping, gripping and pulling. With a limited lifetime warranty and a wide array of outstanding features this is an essential cable stripper for every toolbox.
|
A sleek-nose design gets into tight places and a laser heat-treated mating edge makes this the only crimper you'll ever need. Ideal for both insulated and non-insulated solderless connections and terminals.
|
Greenlee Textron Placement Tool, Plastic/Steel, Silver
|
|
|
Headquarters Palm City, Jensen Beach, Stuart
