Home > PLUMBING > ROUGH PLUMBING SUPPLIES > TUBING
Choose a sub category:
POLYETHYLENE TUBING PEX TUBING FLAIR IT TUBING
VINYL TUBING RUBBER TUBING
Sort By:
Page of 3
PIPE PEX STICK WHT 1/4IN X 5FT Conbraco APPW512 Apollo Conbraco APPW1012 Apollo
Apollo Pipe, Nominal Size: 1/4 in, 5 ft L, Barb Connection, 160 psi, Temperature Rating: 200 deg F, Polyethylene, White Apollo PEX? tubing is cross-linked, high density polyethylene. The silane method, also called the "moisture cure" method, results in PEX-B, where the cross-linking is performed in a secondary post-extrusion process, producing cross-links between a cross-linking agent. The process is accelerated with heat and moisture. The cross-linked bonds are formed through silanol condensation between two grafted vinyltrimethoxysilane (VTMS) units, connecting the polyethylene chains with C-C-Si-O-SiC-C bridges. PEX tubing is for use in hot and cold potable water distribution systems. PEX tubing can also be used in "continuously recirculating" plumbing systems up to 140 deg F while maintaining chlorine resistance. The tubing may be installed in concrete, gypsum based lightweight concrete, sand, asphalt, in or under wood flooring or behind wallboard or plaster. Apollo PEX? tubing is cross-linked, high density polyethylene. The silane method, also called the "moisture cure" method, results in PEX-B, where the cross-linking is performed in a secondary post-extrusion process, producing cross-links between a cross-linking agent. The process is accelerated with heat and moisture. The cross-linked bonds are formed through silanol condensation between two grafted vinyltrimethoxysilane (VTMS) units, connecting the polyethylene chains with C-C-Si-O-SiC-C bridges. PEX tubing is for use in hot and cold potable water distribution systems. PEX tubing can also be used in "continuously recirculating" plumbing systems up to 140 deg F while maintaining chlorine resistance. The tubing may be installed in concrete, gypsum based lightweight concrete, sand, asphalt, in or under wood flooring or behind wallboard or plaster.
Conbraco APPW534 Apollo PIPE PEX A 1/2IN X 5FT WHITE Flair-It 16050 Flexpex Pex Tubing
Apollo PEX? tubing is cross-linked, high density polyethylene. The silane method, also called the "moisture cure" method, results in PEX-B, where the cross-linking is performed in a secondary post-extrusion process, producing cross-links between a cross-linking agent. The process is accelerated with heat and moisture. The cross-linked bonds are formed through silanol condensation between two grafted vinyltrimethoxysilane (VTMS) units, connecting the polyethylene chains with C-C-Si-O-SiC-C bridges. PEX tubing is for use in hot and cold potable water distribution systems. PEX tubing can also be used in "continuously recirculating" plumbing systems up to 140 deg F while maintaining chlorine resistance. The tubing may be installed in concrete, gypsum based lightweight concrete, sand, asphalt, in or under wood flooring or behind wallboard or plaster. PEX-A tubing is cross-linked, high-density polyethylene. All Apollo? Expansion PEX is opaque in color and ensures easy identification of hot, cold and main water lines through different colored print lines. Apollo? Expansion PEX pipe is produced using the high-pressure peroxide method for crosslinked polyethylene (PEXa) in accordance with ASTM F876, F877, CSA B137.5 and PPI TR-3 and is certified to NSF 14/61 standards. Apollo? Expansion PEX pipe also meets the requirements of ASTM F2023 for chlorine resistance. Apollo? Expansion PEX pipe is manufactured using a quality management system which has been certified to the latest version of ISO 9001. Use of Apollo? Expansion PEX pipe in heating systems requires corrosion protection and/or isolation by using a heat exchanger or non-ferrous components throughout the system. Cross-link polyethylene tubing rated SDR9 PEX-a B137.5 potable. NSF listed. ASTM F876/F877 standard. 160 psi at 73.4 deg F, 100 psi at 180 deg, 80 psi at 200 deg. With blue markings. Bar coded.
Flair-It 16051 Flexpex Conbraco APPW51 Apollo PIPE PEX 3/4IN X 5FT WHITE
Cross-link polyethylene tubing rated SDR9 PEX-a B137.5 Potable. NSF Listed. ASTM F876/F877. 160 psi at 73.4 deg F, 100 psi at 180 deg, 80 psi at 200 deg. With white markings. Bar coded. Apollo PEX? tubing is cross-linked, high density polyethylene. The silane method, also called the "moisture cure" method, results in PEX-B, where the cross-linking is performed in a secondary post-extrusion process, producing cross-links between a cross-linking agent. The process is accelerated with heat and moisture. The cross-linked bonds are formed through silanol condensation between two grafted vinyltrimethoxysilane (VTMS) units, connecting the polyethylene chains with C-C-Si-O-SiC-C bridges. PEX tubing is for use in hot and cold potable water distribution systems. PEX tubing can also be used in "continuously recirculating" plumbing systems up to 140 deg F while maintaining chlorine resistance. The tubing may be installed in concrete, gypsum based lightweight concrete, sand, asphalt, in or under wood flooring or behind wallboard or plaster. PEX-A tubing is cross-linked, high-density polyethylene. All Apollo? Expansion PEX is opaque in color and ensures easy identification of hot, cold and main water lines through different colored print lines. Apollo? Expansion PEX pipe is produced using the high-pressure peroxide method for crosslinked polyethylene (PEXa) in accordance with ASTM F876, F877, CSA B137.5 and PPI TR-3 and is certified to NSF 14/61 standards. Apollo? Expansion PEX pipe also meets the requirements of ASTM F2023 for chlorine resistance. Apollo? Expansion PEX pipe is manufactured using a quality management system which has been certified to the latest version of ISO 9001. Use of Apollo? Expansion PEX pipe in heating systems requires corrosion protection and/or isolation by using a heat exchanger or non-ferrous components throughout the system.
Flair-It 16052 Flexpex Pex Tubing Conbraco APPR2012 Apollo U860W20 Straight Pex Tubing Without Oxygen Barrier
Cross-link polyethylene tubing rated SDR9 PEX-a B137.5 Potable. NSF Listed. ASTM F876/F877. 160 psi at 73.4 deg F, 100 psi at 180 deg, 80 psi at 200 deg. With blue markings. Bar coded. Apollo PEX? tubing is cross-linked, high density polyethylene. The silane method, also called the "moisture cure" method, results in PEX-B, where the cross-linking is performed in a secondary post-extrusion process, producing cross-links between a cross-linking agent. The process is accelerated with heat and moisture. The cross-linked bonds are formed through silanol condensation between two grafted vinyltrimethoxysilane (VTMS) units, connecting the polyethylene chains with C-C-Si-O-SiC-C bridges. PEX tubing is for use in hot and cold potable water distribution systems. PEX tubing can also be used in "continuously recirculating" plumbing systems up to 140 deg F while maintaining chlorine resistance. The tubing may be installed in concrete, gypsum based lightweight concrete, sand, asphalt, in or under wood flooring or behind wallboard or plaster. Apollo PEX? tubing is cross-linked, high density polyethylene. The silane method, also called the "moisture cure" method, results in PEX-B, where the cross-linking is performed in a secondary post-extrusion process, producing cross-links between a cross-linking agent. The process is accelerated with heat and moisture. The cross-linked bonds are formed through silanol condensation between two grafted vinyltrimethoxysilane (VTMS) units, connecting the polyethylene chains with C-C-Si-O-SiC-C bridges. PEX tubing is for use in hot and cold potable water distribution systems. PEX tubing can also be used in "continuously recirculating" plumbing systems up to 140 deg F while maintaining chlorine resistance. The tubing may be installed in concrete, gypsum based lightweight concrete, sand, asphalt, in or under wood flooring or behind wallboard or plaster.
Conbraco APPB2012 Apollo Conbraco APPW1034 Apollo PlumbPak PP855-21 Tubing
Apollo PEX? tubing is cross-linked, high density polyethylene. The silane method, also called the "moisture cure" method, results in PEX-B, where the cross-linking is performed in a secondary post-extrusion process, producing cross-links between a cross-linking agent. The process is accelerated with heat and moisture. The cross-linked bonds are formed through silanol condensation between two grafted vinyltrimethoxysilane (VTMS) units, connecting the polyethylene chains with C-C-Si-O-SiC-C bridges. PEX tubing is for use in hot and cold potable water distribution systems. PEX tubing can also be used in "continuously recirculating" plumbing systems up to 140 deg F while maintaining chlorine resistance. The tubing may be installed in concrete, gypsum based lightweight concrete, sand, asphalt, in or under wood flooring or behind wallboard or plaster. Apollo PEX? tubing is cross-linked, high density polyethylene. The silane method, also called the "moisture cure" method, results in PEX-B, where the cross-linking is performed in a secondary post-extrusion process, producing cross-links between a cross-linking agent. The process is accelerated with heat and moisture. The cross-linked bonds are formed through silanol condensation between two grafted vinyltrimethoxysilane (VTMS) units, connecting the polyethylene chains with C-C-Si-O-SiC-C bridges. PEX tubing is for use in hot and cold potable water distribution systems. PEX tubing can also be used in "continuously recirculating" plumbing systems up to 140 deg F while maintaining chlorine resistance. The tubing may be installed in concrete, gypsum based lightweight concrete, sand, asphalt, in or under wood flooring or behind wallboard or plaster. 1/4 in x 25 ft poly tubing.
PIPE PEX 1IN X 5FT WHITE Conbraco APPB2034 Apollo Conbraco APPR2034 Apollo
PEX-A tubing is cross-linked, high-density polyethylene. All Apollo? Expansion PEX is opaque in color and ensures easy identification of hot, cold and main water lines through different colored print lines. Apollo? Expansion PEX pipe is produced using the high-pressure peroxide method for crosslinked polyethylene (PEXa) in accordance with ASTM F876, F877, CSA B137.5 and PPI TR-3 and is certified to NSF 14/61 standards. Apollo? Expansion PEX pipe also meets the requirements of ASTM F2023 for chlorine resistance. Apollo? Expansion PEX pipe is manufactured using a quality management system which has been certified to the latest version of ISO 9001. Use of Apollo? Expansion PEX pipe in heating systems requires corrosion protection and/or isolation by using a heat exchanger or non-ferrous components throughout the system. Apollo PEX? tubing is cross-linked, high density polyethylene. The silane method, also called the "moisture cure" method, results in PEX-B, where the cross-linking is performed in a secondary post-extrusion process, producing cross-links between a cross-linking agent. The process is accelerated with heat and moisture. The cross-linked bonds are formed through silanol condensation between two grafted vinyltrimethoxysilane (VTMS) units, connecting the polyethylene chains with C-C-Si-O-SiC-C bridges. PEX tubing is for use in hot and cold potable water distribution systems. PEX tubing can also be used in "continuously recirculating" plumbing systems up to 140 deg F while maintaining chlorine resistance. The tubing may be installed in concrete, gypsum based lightweight concrete, sand, asphalt, in or under wood flooring or behind wallboard or plaster. Apollo PEX? tubing is cross-linked, high density polyethylene. The silane method, also called the "moisture cure" method, results in PEX-B, where the cross-linking is performed in a secondary post-extrusion process, producing cross-links between a cross-linking agent. The process is accelerated with heat and moisture. The cross-linked bonds are formed through silanol condensation between two grafted vinyltrimethoxysilane (VTMS) units, connecting the polyethylene chains with C-C-Si-O-SiC-C bridges. PEX tubing is for use in hot and cold potable water distribution systems. PEX tubing can also be used in "continuously recirculating" plumbing systems up to 140 deg F while maintaining chlorine resistance. The tubing may be installed in concrete, gypsum based lightweight concrete, sand, asphalt, in or under wood flooring or behind wallboard or plaster.
PIPE PEX COIL WHT 3/4IN X 25FT Abbott Rubber 9001P-200 Lightweight Non-Toxic Tubing Spartan 20010 Lightweight Flexible Pipe
Apollo PEX tubing is cross-linked, high-density polyethylene and is available for potable water distribution systems in red, white and blue colors for easy identification of hot, cold and main water lines. Apollo PEX can be used in continuously recirculating plumbing systems up to 140 deg F while maintaining chlorine resistance. For use with compression fittings. Made from non-toxic, odorless, tasteless ingredients that meet FDA requirements. Natural in color, lightweight and resistant to stress cracking, it forms a solid barrier to gases, vapor and moisture. Lightweight, low-pressure, manufactured from selected resins and designed specifically for non-critical applications such as open-end drain line. Use for farm/ranch water systems, electrical or cable TV conduit, construction, city service lines, sprinkler systems, skating rinks, air conditioning, submersible pumps etc. Not to be exposed to direct sunlight for extended periods. Not for use for compressed air systems. Use with insert fittings and stainless steel clamps. Working pressures based on psi at 73.4 deg F. At higher temperatures working pressure is less.
Abbott Rubber 7101P/PSVTR32-200 Lightweight Tubing Conbraco APPW538 Apollo PIPE POLY 160LB 1/2IN X 100FT
FDA-grade, suitable for use with liquid transfer, use as flexible drain line, for use with hose barbs and clamps. Apollo PEX? tubing is cross-linked, high density polyethylene. The silane method, also called the "moisture cure" method, results in PEX-B, where the cross-linking is performed in a secondary post-extrusion process, producing cross-links between a cross-linking agent. The process is accelerated with heat and moisture. The cross-linked bonds are formed through silanol condensation between two grafted vinyltrimethoxysilane (VTMS) units, connecting the polyethylene chains with C-C-Si-O-SiC-C bridges. PEX tubing is for use in hot and cold potable water distribution systems. PEX tubing can also be used in "continuously recirculating" plumbing systems up to 140 deg F while maintaining chlorine resistance. The tubing may be installed in concrete, gypsum based lightweight concrete, sand, asphalt, in or under wood flooring or behind wallboard or plaster. PE4710 high-density, manufactured from selected resins. Use for farm/ranch water systems, electrical or cable TV conduit, construction and excavations, city service lines, mine and industrial drainage, sprinkler systems, irrigation, skating rinks, air conditioning, submersible pumps etc. Not to be exposed to direct sunlight for extended periods. Not for use for compressed air systems. Use with insert fittings and stainless steel clamps. Meets or exceeds ASTM-D2239. NSF Approved for drinking water use. Working pressures based on psi at 73.4 deg F. At higher temperature working pressure is less.
Spartan 20020 Lightweight Flexible Pipe Cresline 18205 Flexible Pipe Conbraco APPB10012 Apollo
Lightweight, low-pressure, manufactured from selected resins and designed specifically for non-critical applications such as open-end drain line. Use for farm/ranch water systems, electrical or cable TV conduit, construction, city service lines, sprinkler systems, skating rinks, air conditioning, submersible pumps etc. Not to be exposed to direct sunlight for extended periods. Not for use for compressed air systems. Use with insert fittings and stainless steel clamps. Working pressures based on psi at 73.4 deg F. At higher temperatures working pressure is less. PE4710 high-density, manufactured from selected resins. Use for farm/ranch water systems, electrical or cable TV conduit, construction and excavations, city service lines, mine and industrial drainage, sprinkler systems, irrigation, skating rinks, air conditioning, submersible pumps etc. Not to be exposed to direct sunlight for extended periods. Not for use for compressed air systems. Use with insert fittings and stainless steel clamps. Meets or exceeds ASTM-D2239. NSF Approved for drinking water use. Working pressures based on psi at 73.4 deg F. At higher temperature working pressure is less. Apollo PEX? tubing is cross-linked, high density polyethylene. The silane method, also called the "moisture cure" method, results in PEX-B, where the cross-linking is performed in a secondary post-extrusion process, producing cross-links between a cross-linking agent. The process is accelerated with heat and moisture. The cross-linked bonds are formed through silanol condensation between two grafted vinyltrimethoxysilane (VTMS) units, connecting the polyethylene chains with C-C-Si-O-SiC-C bridges. PEX tubing is for use in hot and cold potable water distribution systems. PEX tubing can also be used in "continuously recirculating" plumbing systems up to 140 deg F while maintaining chlorine resistance. The tubing may be installed in concrete, gypsum based lightweight concrete, sand, asphalt, in or under wood flooring or behind wallboard or plaster.
Conbraco APPR10012 Apollo Conbraco APPW10012 Apollo Cresline 18335 Flexible Pipe
Apollo PEX? tubing is cross-linked, high density polyethylene. The silane method, also called the "moisture cure" method, results in PEX-B, where the cross-linking is performed in a secondary post-extrusion process, producing cross-links between a cross-linking agent. The process is accelerated with heat and moisture. The cross-linked bonds are formed through silanol condensation between two grafted vinyltrimethoxysilane (VTMS) units, connecting the polyethylene chains with C-C-Si-O-SiC-C bridges. PEX tubing is for use in hot and cold potable water distribution systems. PEX tubing can also be used in "continuously recirculating" plumbing systems up to 140 deg F while maintaining chlorine resistance. The tubing may be installed in concrete, gypsum based lightweight concrete, sand, asphalt, in or under wood flooring or behind wallboard or plaster. Apollo PEX? tubing is cross-linked, high density polyethylene. The silane method, also called the "moisture cure" method, results in PEX-B, where the cross-linking is performed in a secondary post-extrusion process, producing cross-links between a cross-linking agent. The process is accelerated with heat and moisture. The cross-linked bonds are formed through silanol condensation between two grafted vinyltrimethoxysilane (VTMS) units, connecting the polyethylene chains with C-C-Si-O-SiC-C bridges. PEX tubing is for use in hot and cold potable water distribution systems. PEX tubing can also be used in "continuously recirculating" plumbing systems up to 140 deg F while maintaining chlorine resistance. The tubing may be installed in concrete, gypsum based lightweight concrete, sand, asphalt, in or under wood flooring or behind wallboard or plaster. PE4710 high-density, manufactured from selected resins. Use for farm/ranch water systems, electrical or cable TV conduit, construction and excavations, city service lines, mine and industrial drainage, sprinkler systems, irrigation, skating rinks, air conditioning, submersible pumps, etc. NOT TO BE exposed to direct sunlight for extended periods. NOT FOR USE For Compressed Air Systems. Use with insert fittings and stainless steel clamps. Meets or exceeds ASTM-D2239. NSF Approved for drinking water use. Working pressures based on PSI at 73.4 degrees Fahrenheit. At higher temperature working pressure is less.
Spartan 20030 Lightweight Flexible Pipe APPR2012 Straight Pex Tubing Sharkbite APPB2012 Straight Pex Tubing
Lightweight, low-pressure, manufactured from selected resins and designed specifically for non-critical applications such as open-end drain line. Use for farm/ranch water systems, electrical or cable TV conduit, construction, city service lines, sprinkler systems, skating rinks, air conditioning, submersible pumps etc. Not to be exposed to direct sunlight for extended periods. Not for use for compressed air systems. Use with insert fittings and stainless steel clamps. Working pressures based on psi at 73.4 deg F. At higher temperatures working pressure is less. Apollo PEX? tubing is cross-linked, high density polyethylene. The silane method, also called the "moisture cure" method, results in PEX-B, where the cross-linking is performed in a secondary post-extrusion process, producing cross-links between a cross-linking agent. The process is accelerated with heat and moisture. The cross-linked bonds are formed through silanol condensation between two grafted vinyltrimethoxysilane (VTMS) units, connecting the polyethylene chains with C-C-Si-O-SiC-C bridges. PEX tubing is for use in hot and cold potable water distribution systems. PEX tubing can also be used in "continuously recirculating" plumbing systems up to 140 deg F while maintaining chlorine resistance. The tubing may be installed in concrete, gypsum based lightweight concrete, sand, asphalt, in or under wood flooring or behind wallboard or plaster. Apollo PEX? tubing is cross-linked, high density polyethylene. The silane method, also called the "moisture cure" method, results in PEX-B, where the cross-linking is performed in a secondary post-extrusion process, producing cross-links between a cross-linking agent. The process is accelerated with heat and moisture. The cross-linked bonds are formed through silanol condensation between two grafted vinyltrimethoxysilane (VTMS) units, connecting the polyethylene chains with C-C-Si-O-SiC-C bridges. PEX tubing is for use in hot and cold potable water distribution systems. PEX tubing can also be used in "continuously recirculating" plumbing systems up to 140 deg F while maintaining chlorine resistance. The tubing may be installed in concrete, gypsum based lightweight concrete, sand, asphalt, in or under wood flooring or behind wallboard or plaster.
Cresline 18515 Flexible Tubing Abbott Rubber 9002P Lightweight Non-Toxic Tubing Abbott Rubber 7001P Lightweight Tubing
For use with potable water. 250 psi. CTS polyethylene pipe. PE 4710 high-density, manufactured from select resins. Not to be exposed to direct sunlight for extended periods. Not for use for compressed air systems. Use with compression fittings. Meets or exceeds ASTM D-2737. NSF approved for drinking water use. Working pressure based on psi at 73.4 deg F. At higher temperature working pressure is less. AWWA C-901. For use with compression fittings. Made from non-toxic, odorless, tasteless ingredients that meet FDA requirements. Natural in color, lightweight and resistant to stress cracking, it forms a solid barrier to gases, vapor and moisture. FDA-grade, suitable for use with liquid transfer, use as flexible drain line, for use with hose barbs and clamps.
PIPE PEX A 1/2IN X 100FT WHITE PIPE PEX A 1/2IN X 100FT RED PIPE PEX A 1/2IN X 100FT BLUE
PEX-A tubing is cross-linked, high-density polyethylene. All Apollo? Expansion PEX is opaque in color and ensures easy identification of hot, cold and main water lines through different colored print lines. Apollo? Expansion PEX pipe is produced using the high-pressure peroxide method for crosslinked polyethylene (PEXa) in accordance with ASTM F876, F877, CSA B137.5 and PPI TR-3 and is certified to NSF 14/61 standards. Apollo? Expansion PEX pipe also meets the requirements of ASTM F2023 for chlorine resistance. Apollo? Expansion PEX pipe is manufactured using a quality management system which has been certified to the latest version of ISO 9001. Use of Apollo? Expansion PEX pipe in heating systems requires corrosion protection and/or isolation by using a heat exchanger or non-ferrous components throughout the system. PEX-A tubing is cross-linked, high-density polyethylene. All Apollo? Expansion PEX is opaque in color and ensures easy identification of hot, cold and main water lines through different colored print lines. Apollo? Expansion PEX pipe is produced using the high-pressure peroxide method for crosslinked polyethylene (PEXa) in accordance with ASTM F876, F877, CSA B137.5 and PPI TR-3 and is certified to NSF 14/61 standards. Apollo? Expansion PEX pipe also meets the requirements of ASTM F2023 for chlorine resistance. Apollo? Expansion PEX pipe is manufactured using a quality management system which has been certified to the latest version of ISO 9001. Use of Apollo? Expansion PEX pipe in heating systems requires corrosion protection and/or isolation by using a heat exchanger or non-ferrous components throughout the system. PEX-A tubing is cross-linked, high-density polyethylene. All Apollo? Expansion PEX is opaque in color and ensures easy identification of hot, cold and main water lines through different colored print lines. Apollo? Expansion PEX pipe is produced using the high-pressure peroxide method for crosslinked polyethylene (PEXa) in accordance with ASTM F876, F877, CSA B137.5 and PPI TR-3 and is certified to NSF 14/61 standards. Apollo? Expansion PEX pipe also meets the requirements of ASTM F2023 for chlorine resistance. Apollo? Expansion PEX pipe is manufactured using a quality management system which has been certified to the latest version of ISO 9001. Use of Apollo? Expansion PEX pipe in heating systems requires corrosion protection and/or isolation by using a heat exchanger or non-ferrous components throughout the system.
Abbott Rubber 7002P/PSVTR52-100 Lightweight Tubing Abbott Rubber 9003P/PSPTR6-100 Lightweight Non-Toxic Tubing Cresline 18105 Flexible Pipe
FDA-grade, suitable for use with liquid transfer, use as flexible drain line, for use with hose barbs and clamps. For use with compression fittings. Made from non-toxic, odorless, tasteless ingredients that meet FDA requirements. Natural in color, lightweight and resistant to stress cracking, it forms a solid barrier to gases, vapor and moisture. PE4710 high-density, manufactured from selected resins. Use for farm/ranch water systems, electrical or cable TV conduit, construction and excavations, city service lines, mine and industrial drainage, sprinkler systems, irrigation, skating rinks, air conditioning, submersible pumps etc. Not to be exposed to direct sunlight for extended periods. Not for use for compressed air systems. Use with insert fittings and stainless steel clamps. Meets or exceeds ASTM-D2239. NSF Approved for drinking water use. Working pressures based on psi at 73.4 deg F. At higher temperature working pressure is less.
Cresline 18215 Flexible Pipe Abbott Rubber 7003P/PSVTR68-100 Lightweight Tubing Cresline 18005 Flexible Pipe
PE4710 high-density, manufactured from selected resins. Use for farm/ranch water systems, electrical or cable TV conduit, construction and excavations, city service lines, mine and industrial drainage, sprinkler systems, irrigation, skating rinks, air conditioning, submersible pumps etc. Not to be exposed to direct sunlight for extended periods. Not for use for compressed air systems. Use with insert fittings and stainless steel clamps. Meets or exceeds ASTM-D2239. NSF Approved for drinking water use. Working pressures based on psi at 73.4 deg F. At higher temperature working pressure is less. FDA-grade, suitable for use with liquid transfer, use as flexible drain line, for use with hose barbs and clamps. PE4710 high-density, manufactured from selected resins. Use for farm/ranch water systems, electrical or cable TV conduit, construction and excavations, city service lines, mine and industrial drainage, sprinkler systems, irrigation, skating rinks, air conditioning, submersible pumps etc. Not to be exposed to direct sunlight for extended periods. Not for use for compressed air systems. Use with insert fittings and stainless steel clamps. Meets or exceeds ASTM-D2239. NSF Approved for drinking water use. Working pressures based on psi at 73.4 deg F. At higher temperature working pressure is less.
Conbraco APPB10034 Apollo Conbraco APPR10034 Apollo Conbraco APPW10034 Apollo
Apollo PEX? tubing is cross-linked, high density polyethylene. The silane method, also called the "moisture cure" method, results in PEX-B, where the cross-linking is performed in a secondary post-extrusion process, producing cross-links between a cross-linking agent. The process is accelerated with heat and moisture. The cross-linked bonds are formed through silanol condensation between two grafted vinyltrimethoxysilane (VTMS) units, connecting the polyethylene chains with C-C-Si-O-SiC-C bridges. PEX tubing is for use in hot and cold potable water distribution systems. PEX tubing can also be used in "continuously recirculating" plumbing systems up to 140 deg F while maintaining chlorine resistance. The tubing may be installed in concrete, gypsum based lightweight concrete, sand, asphalt, in or under wood flooring or behind wallboard or plaster. Apollo PEX? tubing is cross-linked, high density polyethylene. The silane method, also called the "moisture cure" method, results in PEX-B, where the cross-linking is performed in a secondary post-extrusion process, producing cross-links between a cross-linking agent. The process is accelerated with heat and moisture. The cross-linked bonds are formed through silanol condensation between two grafted vinyltrimethoxysilane (VTMS) units, connecting the polyethylene chains with C-C-Si-O-SiC-C bridges. PEX tubing is for use in hot and cold potable water distribution systems. PEX tubing can also be used in "continuously recirculating" plumbing systems up to 140 deg F while maintaining chlorine resistance. The tubing may be installed in concrete, gypsum based lightweight concrete, sand, asphalt, in or under wood flooring or behind wallboard or plaster. Apollo PEX? tubing is cross-linked, high density polyethylene. The silane method, also called the "moisture cure" method, results in PEX-B, where the cross-linking is performed in a secondary post-extrusion process, producing cross-links between a cross-linking agent. The process is accelerated with heat and moisture. The cross-linked bonds are formed through silanol condensation between two grafted vinyltrimethoxysilane (VTMS) units, connecting the polyethylene chains with C-C-Si-O-SiC-C bridges. PEX tubing is for use in hot and cold potable water distribution systems. PEX tubing can also be used in "continuously recirculating" plumbing systems up to 140 deg F while maintaining chlorine resistance. The tubing may be installed in concrete, gypsum based lightweight concrete, sand, asphalt, in or under wood flooring or behind wallboard or plaster.
Cresline 18355 Flexible Pipe Cresline 18535 Flexible Tubing Abbott Rubber 7004P/PSVTR75-100 Lightweight Tubing
PE4710 high-density, manufactured from selected resins. Use for farm/ranch water systems, electrical or cable TV conduit, construction and excavations, city service lines, mine and industrial drainage, sprinkler systems, irrigation, skating rinks, air conditioning, submersible pumps etc. Not to be exposed to direct sunlight for extended periods. Not for use for compressed air systems. Use with insert fittings and stainless steel clamps. Meets or exceeds ASTM-D2239. NSF Approved for drinking water use. Working pressures based on psi at 73.4 deg F. At higher temperature working pressure is less. For use with potable water. 250 psi. CTS polyethylene pipe. PE 4710 high-density, manufactured from select resins. Not to be exposed to direct sunlight for extended periods. Not for use for compressed air systems. Use with compression fittings. Meets or exceeds ASTM D-2737. NSF approved for drinking water use. Working pressure based on psi at 73.4 deg F. At higher temperature working pressure is less. AWWA C-901. FDA-grade, suitable for use with liquid transfer, use as flexible drain line, for use with hose barbs and clamps.
Cresline 18115 Flexible Pipe Abbott Rubber 9004P Lightweight Non-Toxic Tubing Abbott Rubber 7005P/PSVTR86-100 Lightweight Tubing
PE4710 high-density, manufactured from selected resins. Use for farm/ranch water systems, electrical or cable TV conduit, construction and excavations, city service lines, mine and industrial drainage, sprinkler systems, irrigation, skating rinks, air conditioning, submersible pumps etc. Not to be exposed to direct sunlight for extended periods. Not for use for compressed air systems. Use with insert fittings and stainless steel clamps. Meets or exceeds ASTM-D2239. NSF Approved for drinking water use. Working pressures based on psi at 73.4 deg F. At higher temperature working pressure is less. For use with compression fittings. Made from non-toxic, odorless, tasteless ingredients that meet FDA requirements. Natural in color, lightweight and resistant to stress cracking, it forms a solid barrier to gases, vapor and moisture. FDA-grade, suitable for use with liquid transfer, use as flexible drain line, for use with hose barbs and clamps.
Abbott Rubber RVIG Non-Toxic Tubing Spartan 20040 Lightweight Flexible Pipe Abbott Rubber RVEB Non-Toxic Tubing
FDA-grade, suitable for use with liquid transfer, use as flexible drain line, for use with hose barbs and lamps. Lightweight, low-pressure, manufactured from selected resins and designed specifically for non-critical applications such as open-end drain line. Use for farm/ranch water systems, electrical or cable TV conduit, construction, city service lines, sprinkler systems, skating rinks, air conditioning, submersible pumps etc. Not to be exposed to direct sunlight for extended periods. Not for use for compressed air systems. Use with insert fittings and stainless steel clamps. Working pressures based on psi at 73.4 deg F. At higher temperatures working pressure is less. FDA-grade, suitable for use with liquid transfer, use as flexible drain line, for use with hose barbs and lamps.
Abbott Rubber RVDC Non-Toxic Tubing Flair-It 16062 Flexpex Pex Tubing Cresline 18015 Flexible Pipe
FDA-grade, suitable for use with liquid transfer, use as flexible drain line, for use with hose barbs and lamps. Cross-link polyethylene tubing rated SDR9 PEX-a B137.5 potable. NSF listed. ASTM F876/F877 standard. 160 psi at 73.4 deg F, 100 psi at 180 deg, 80 psi at 200 deg. With blue markings. Bar coded. PE4710 high-density, manufactured from selected resins. Use for farm/ranch water systems, electrical or cable TV conduit, construction and excavations, city service lines, mine and industrial drainage, sprinkler systems, irrigation, skating rinks, air conditioning, submersible pumps etc. Not to be exposed to direct sunlight for extended periods. Not for use for compressed air systems. Use with insert fittings and stainless steel clamps. Meets or exceeds ASTM-D2239. NSF Approved for drinking water use. Working pressures based on psi at 73.4 deg F. At higher temperature working pressure is less.
Flair-It 16063 Flexpex Pex Tubing Sharkbite U870B10 Straight Pex Tubing Without Oxygen Barrier PIPE PEX A 3/4IN X 100FT WHITE
Cross-link polyethylene tubing rated SDR9 PEX-a B137.5 potable. NSF listed. ASTM F876/F877 standard. 160 psi at 73.4 deg F, 100 psi at 180 deg, 80 psi at 200 deg. With blue markings. Bar coded. Apollo PEX? tubing is cross-linked, high density polyethylene. The silane method, also called the "moisture cure" method, results in PEX-B, where the cross-linking is performed in a secondary post-extrusion process, producing cross-links between a cross-linking agent. The process is accelerated with heat and moisture. The cross-linked bonds are formed through silanol condensation between two grafted vinyltrimethoxysilane (VTMS) units, connecting the polyethylene chains with C-C-Si-O-SiC-C bridges. PEX tubing is for use in hot and cold potable water distribution systems. PEX tubing can also be used in "continuously recirculating" plumbing systems up to 140 deg F while maintaining chlorine resistance. The tubing may be installed in concrete, gypsum based lightweight concrete, sand, asphalt, in or under wood flooring or behind wallboard or plaster. PEX-A tubing is cross-linked, high-density polyethylene. All Apollo? Expansion PEX is opaque in color and ensures easy identification of hot, cold and main water lines through different colored print lines. Apollo? Expansion PEX pipe is produced using the high-pressure peroxide method for crosslinked polyethylene (PEXa) in accordance with ASTM F876, F877, CSA B137.5 and PPI TR-3 and is certified to NSF 14/61 standards. Apollo? Expansion PEX pipe also meets the requirements of ASTM F2023 for chlorine resistance. Apollo? Expansion PEX pipe is manufactured using a quality management system which has been certified to the latest version of ISO 9001. Use of Apollo? Expansion PEX pipe in heating systems requires corrosion protection and/or isolation by using a heat exchanger or non-ferrous components throughout the system.
U870R10 Straight Pex Tubing Without Oxygen Barrier Spartan 20015 Lightweight Flexible Pipe Cresline 18225 Flexible Pipe
Apollo PEX? tubing is cross-linked, high density polyethylene. The silane method, also called the "moisture cure" method, results in PEX-B, where the cross-linking is performed in a secondary post-extrusion process, producing cross-links between a cross-linking agent. The process is accelerated with heat and moisture. The cross-linked bonds are formed through silanol condensation between two grafted vinyltrimethoxysilane (VTMS) units, connecting the polyethylene chains with C-C-Si-O-SiC-C bridges. PEX tubing is for use in hot and cold potable water distribution systems. PEX tubing can also be used in "continuously recirculating" plumbing systems up to 140 deg F while maintaining chlorine resistance. The tubing may be installed in concrete, gypsum based lightweight concrete, sand, asphalt, in or under wood flooring or behind wallboard or plaster. Lightweight, low-pressure, manufactured from selected resins and designed specifically for non-critical applications such as open-end drain line. Use for farm/ranch water systems, electrical or cable TV conduit, construction, city service lines, sprinkler systems, skating rinks, air conditioning, submersible pumps etc. Not to be exposed to direct sunlight for extended periods. Not for use for compressed air systems. Use with insert fittings and stainless steel clamps. Working pressures based on psi at 73.4 deg F. At higher temperatures working pressure is less. PE4710 high-density, manufactured from selected resins. Use for farm/ranch water systems, electrical or cable TV conduit, construction and excavations, city service lines, mine and industrial drainage, sprinkler systems, irrigation, skating rinks, air conditioning, submersible pumps etc. Not to be exposed to direct sunlight for extended periods. Not for use for compressed air systems. Use with insert fittings and stainless steel clamps. Meets or exceeds ASTM-D2239. NSF Approved for drinking water use. Working pressures based on psi at 73.4 deg F. At higher temperature working pressure is less.
PIPE PEX A 3/4IN X 100FT RED Abbott Rubber RVJG Non-Toxic Tubing Spartan 21050 Lightweight Flexible Pipe
PEX-A tubing is cross-linked, high-density polyethylene. All Apollo? Expansion PEX is Red in color and ensures easy identification of hot, cold and main water lines through different colored print lines. Apollo? Expansion PEX pipe is produced using the high-pressure peroxide method for crosslinked polyethylene (PEXa) in accordance with ASTM F876, F877, CSA B137.5 and PPI TR-3 and is certified to NSF 14/61 standards. Apollo? Expansion PEX pipe also meets the requirements of ASTM F2023 for chlorine resistance. Apollo? Expansion PEX pipe is manufactured using a quality management system which has been certified to the latest version of ISO 9001. Use of Apollo? Expansion PEX pipe in heating systems requires corrosion protection and/or isolation by using a heat exchanger or non-ferrous components throughout the system. Clear PVC tubing manufactured with non-toxic FDA compounds. Can be used for flexible lines for low pressure air, water, liquids, beverages, chemicals and gases as well as drain lines for air conditioners and dehumidifiers. Excellent resistance to mild acids and chemicals. See through design allows for visual flow. Not for use with ice makers or petroleum-based products. Lightweight, low-pressure, manufactured from selected resins and designed specifically for non-critical applications such as open-end drain line. Use for farm/ranch water systems, electrical or cable TV conduit, construction, city service lines, sprinkler systems, skating rinks, air conditioning, submersible pumps etc. Not to be exposed to direct sunlight for extended periods. Not for use for compressed air systems. Use with insert fittings and stainless steel clamps. Working pressures based on psi at 73.4 deg F. At higher temperatures working pressure is less.
Cresline 18375 Flexible Pipe PIPE PEXA 3/4IN X 100FT BLUE Abbott Rubber RVKI Non-Toxic Tubing
PE4710 high-density, manufactured from selected resins. Use for farm/ranch water systems, electrical or cable TV conduit, construction and excavations, city service lines, mine and industrial drainage, sprinkler systems, irrigation, skating rinks, air conditioning, submersible pumps etc. Not to be exposed to direct sunlight for extended periods. Not for use for compressed air systems. Use with insert fittings and stainless steel clamps. Meets or exceeds ASTM-D2239. NSF Approved for drinking water use. Working pressures based on psi at 73.4 deg F. At higher temperature working pressure is less. PEX-A tubing is cross-linked, high-density polyethylene. All Apollo? Expansion PEX is opaque in color and ensures easy identification of hot, cold and main water lines through different colored print lines. Apollo? Expansion PEX pipe is produced using the high-pressure peroxide method for crosslinked polyethylene (PEXa) in accordance with ASTM F876, F877, CSA B137.5 and PPI TR-3 and is certified to NSF 14/61 standards. Apollo? Expansion PEX pipe also meets the requirements of ASTM F2023 for chlorine resistance. Apollo? Expansion PEX pipe is manufactured using a quality management system which has been certified to the latest version of ISO 9001. Use of Apollo? Expansion PEX pipe in heating systems requires corrosion protection and/or isolation by using a heat exchanger or non-ferrous components throughout the system. FDA-grade, suitable for use with liquid transfer, use as flexible drain line, for use with hose barbs and lamps.
CONBRACO APPB30012 CONBRACO APPR30012 PIPE POLY 160LB 1/2IN X 400FT
Apollo PEX? tubing is cross-linked, high density polyethylene. The silane method, also called the "moisture cure" method, results in PEX-B, where the cross-linking is performed in a secondary post-extrusion process, producing cross-links between a cross-linking agent. The process is accelerated with heat and moisture. The cross-linked bonds are formed through silanol condensation between two grafted vinyltrimethoxysilane (VTMS) units, connecting the polyethylene chains with C-C-Si-O-SiC-C bridges. PEX tubing is for use in hot and cold potable water distribution systems. PEX tubing can also be used in "continuously recirculating" plumbing systems up to 140 deg F while maintaining chlorine resistance. The tubing may be installed in concrete, gypsum based lightweight concrete, sand, asphalt, in or under wood flooring or behind wallboard or plaster. Apollo PEX? tubing is cross-linked, high density polyethylene. The silane method, also called the "moisture cure" method, results in PEX-B, where the cross-linking is performed in a secondary post-extrusion process, producing cross-links between a cross-linking agent. The process is accelerated with heat and moisture. The cross-linked bonds are formed through silanol condensation between two grafted vinyltrimethoxysilane (VTMS) units, connecting the polyethylene chains with C-C-Si-O-SiC-C bridges. PEX tubing is for use in hot and cold potable water distribution systems. PEX tubing can also be used in "continuously recirculating" plumbing systems up to 140 deg F while maintaining chlorine resistance. The tubing may be installed in concrete, gypsum based lightweight concrete, sand, asphalt, in or under wood flooring or behind wallboard or plaster. PE4710 high-density, manufactured from selected resins. Use for farm/ranch water systems, electrical or cable TV conduit, construction and excavations, city service lines, mine and industrial drainage, sprinkler systems, irrigation, skating rinks, air conditioning, submersible pumps etc. Not to be exposed to direct sunlight for extended periods. Not for use for compressed air systems. Use with insert fittings and stainless steel clamps. Meets or exceeds ASTM-D2239. NSF Approved for drinking water use. Working pressures based on psi at 73.4 deg F. At higher temperature working pressure is less.
Abbott Rubber RVBKI Non-Toxic Tubing Abbott Rubber 7006P/PSVTR108-10 Lightweight Tubing Abbott Rubber 7044P/PSVTR85-100 Lightweight Tubing
General-purpose-grade, suitable for use with liquid transfer, use as flexible drain line, for use with hose barbs and clamps. FDA-grade, suitable for use with liquid transfer, use as flexible drain line, for use with hose barbs and clamps. FDA-grade, suitable for use with liquid transfer, use as flexible drain line, for use with hose barbs and clamps.
Conbraco APPOB10034 Apollo PIPE PEX 1/2INCHX300FOOT WHITE Conbraco APPB1001 Apollo
Oxygen Barrier PEX tubing has been designed to prevent diffusion of oxygen into hydronic radiant heating systems. A layer of polymer is laminated to the outside surface which is highly resistant to the passage of oxygen. Oxygen Barrier PEX tubing is good for hydronic radiant heating, cooling and snow melting systems using water or water/glycol mix. The tubing may be installed in concrete, gypsum based lightweight concrete, sand, asphalt, in or under wood flooring or behind wallboard or plaster. Oxygen barrier PEX tubing may also be used as transfer lines for baseboard heating systems with a maximum operating temperature of 200 deg F at 100 psi. Apollo PEX? tubing is cross-linked, high density polyethylene. The silane method, also called the "moisture cure" method, results in PEX-B, where the cross-linking is performed in a secondary post-extrusion process, producing cross-links between a cross-linking agent. The process is accelerated with heat and moisture. The cross-linked bonds are formed through silanol condensation between two grafted vinyltrimethoxysilane (VTMS) units, connecting the polyethylene chains with C-C-Si-O-SiC-C bridges. PEX tubing is for use in hot and cold potable water distribution systems. PEX tubing can also be used in "continuously recirculating" plumbing systems up to 140 deg F while maintaining chlorine resistance. The tubing may be installed in concrete, gypsum based lightweight concrete, sand, asphalt, in or under wood flooring or behind wallboard or plaster. Apollo PEX? tubing is cross-linked, high density polyethylene. The silane method, also called the "moisture cure" method, results in PEX-B, where the cross-linking is performed in a secondary post-extrusion process, producing cross-links between a cross-linking agent. The process is accelerated with heat and moisture. The cross-linked bonds are formed through silanol condensation between two grafted vinyltrimethoxysilane (VTMS) units, connecting the polyethylene chains with C-C-Si-O-SiC-C bridges. PEX tubing is for use in hot and cold potable water distribution systems. PEX tubing can also be used in "continuously recirculating" plumbing systems up to 140 deg F while maintaining chlorine resistance. The tubing may be installed in concrete, gypsum based lightweight concrete, sand, asphalt, in or under wood flooring or behind wallboard or plaster.
Conbraco APPR1001 Apollo Conbraco APPW1001 Apollo Abbott Rubber A14000TB Piliable Air Hose
Apollo PEX? tubing is cross-linked, high density polyethylene. The silane method, also called the "moisture cure" method, results in PEX-B, where the cross-linking is performed in a secondary post-extrusion process, producing cross-links between a cross-linking agent. The process is accelerated with heat and moisture. The cross-linked bonds are formed through silanol condensation between two grafted vinyltrimethoxysilane (VTMS) units, connecting the polyethylene chains with C-C-Si-O-SiC-C bridges. PEX tubing is for use in hot and cold potable water distribution systems. PEX tubing can also be used in "continuously recirculating" plumbing systems up to 140 deg F while maintaining chlorine resistance. The tubing may be installed in concrete, gypsum based lightweight concrete, sand, asphalt, in or under wood flooring or behind wallboard or plaster. Apollo PEX? tubing is cross-linked, high density polyethylene. The silane method, also called the "moisture cure" method, results in PEX-B, where the cross-linking is performed in a secondary post-extrusion process, producing cross-links between a cross-linking agent. The process is accelerated with heat and moisture. The cross-linked bonds are formed through silanol condensation between two grafted vinyltrimethoxysilane (VTMS) units, connecting the polyethylene chains with C-C-Si-O-SiC-C bridges. PEX tubing is for use in hot and cold potable water distribution systems. PEX tubing can also be used in "continuously recirculating" plumbing systems up to 140 deg F while maintaining chlorine resistance. The tubing may be installed in concrete, gypsum based lightweight concrete, sand, asphalt, in or under wood flooring or behind wallboard or plaster. Lightweight construction, suitable for air, water and spray applications, contractor-grade, for use with hose barbs and clamps.
Abbott Rubber 9005P/PSPTR10-50 Lightweight Non-Toxic Tubing TUBING POLY SIDR-7 HD 1X100FT Abbott Rubber RPBEB Tubing
For use with compression fittings. Made from non-toxic, odorless, tasteless ingredients that meet FDA requirements. Natural in color, lightweight and resistant to stress cracking, it forms a solid barrier to gases, vapor and moisture. PE4710 high-density, manufactured from selected resins. Use for farm/ranch water systems, electrical or cable TV conduit, construction and excavations, city service lines, mine and industrial drainage, sprinkler systems, irrigation, skating rinks, air conditioning, submersible pumps etc. Not to be exposed to direct sunlight for extended periods. Not for use for compressed air systems. Use with insert fittings and stainless steel clamps. Meets or exceeds ASTM-D2239. NSF Approved for drinking water use. Working pressures based on psi at 73.4 deg F. At higher temperature working pressure is less. Suitable for use with air and water lines. Use as pneumatic control line. For use with compression style fittings.
Cresline 18125 Flexible Pipe Spartan 20035 Lightweight Flexible Pipe Abbott Rubber RBBO Flexible Bilge Discharge Hose
PE4710 high-density, manufactured from selected resins. Use for farm/ranch water systems, electrical or cable TV conduit, construction and excavations, city service lines, mine and industrial drainage, sprinkler systems, irrigation, skating rinks, air conditioning, submersible pumps etc. Not to be exposed to direct sunlight for extended periods. Not for use for compressed air systems. Use with insert fittings and stainless steel clamps. Meets or exceeds ASTM-D2239. NSF Approved for drinking water use. Working pressures based on psi at 73.4 deg F. At higher temperature working pressure is less. Lightweight, low-pressure, manufactured from selected resins and designed specifically for non-critical applications such as open-end drain line. Use for farm/ranch water systems, electrical or cable TV conduit, construction, city service lines, sprinkler systems, skating rinks, air conditioning, submersible pumps etc. Not to be exposed to direct sunlight for extended periods. Not for use for compressed air systems. Use with insert fittings and stainless steel clamps. Working pressures based on psi at 73.4 deg F. At higher temperatures working pressure is less. Crushproof, suitable for marine and low-pressure discharge, abrasion- and kink-resistant, no fittings necessary.