Home > PLUMBING > ROUGH PLUMBING SUPPLIES > SOLVENTS & SEALERS
Choose a sub category:
PIPE CEMENTS PIPE CLEANERS & PRIMERS THREAD SEALANT COMPOUNDS
THREAD SEALANT TAPES GAS LEAK DETECTORS PLUMBERS PUTTY
PLUMBING EPOXYS
Sort By:
Page of 2
Harvey's 017072B-500 Pipe Thread Seal Tape Harvey's 017117B Pipe Thread Seal Tape ProSource PMB-445 Pipe Seal Tape
0.4 density, 0.003 in thick. Over 50% elongation and chemically inert. Provides a strong tight seal for any threaded joint and permits easy disassembly. Tolerates -400 to 500 deg F. Suitable for use on oxygen systems. Non-toxic and non-flammable. Meets Federal Specification T-27730A. Harvey Thread Seal Tape, PTFE, Red/White, 520 in L, 1/2 in W, 0.003 in Thick, Density: 0.4 g/cc, Temperature Rating: -400 to 500 deg F, Elongation: 50 % The plumber tape is adhesive tape that is usable on a variety of plumbing fixtures. It fixes leaks and loose pipes for smoother water flow.
Plumb Pak 04151 Pipe Thread Seal Tape Harvey's 017209B Pipe Thread Seal Tape Plumb Pak PP20855100 Pipe Thread Seal Tape
Plumb Pak Thread Seal Tape, PTFE, 520 in L, 1/2 in W 0.4 density, 0.003 in thick. Over 50% elongation and chemically inert. Provides a strong tight seal for any threaded joint and permits easy disassembly. Tolerates -400 to 500 deg F. Suitable for use on oxygen systems. Non-toxic and non-flammable. Meets Federal Specification T-27730A. For use on plumbing threads to prevent leaking.
Oatey 31166 Plumbers Putty Harvey's 043010 Plumbers Putty Harvey's 023015-48 Pipe Joint Compound
Ideal for use on natural surface materials found in sinks, countertops, strainers and shower bases. Remains flexible, so it is easy to work with and cleans up easily. Harvey? plumber's putty is an easy-to-use and long-lasting putty widely used for setting bowls, rims, strainers and faucets. It remains flexible and will not harden, shrink, crack or crumble even if the cup is left open. White thread lubricant and sealant. Brushable paste dries slowly, non-hardening, withstands up to 3000 PSI on gases at temps from -50d F to +500d F. Use on water, steam, natural and LP gas, oils, fuels, dilute acids. Apply to metals, PVC, CPVC, ABS, polypropylene and nylon. All-purpose sealant for HEAVY DUTY applications. Warning: Never use any pipe thread sealant paste or stick on halogens or oxygen; use PTFE Pipe Thread Tape.
Harvey 030005-144 Pipe Thread Compound Harvey's 017252-144 Pipe Thread Seal Tape Oatey 31229 Great White
Harvey? pipe thread stick is a non-hardening gray thread compound designed to lubricate and seal threaded joints on metal pipe. Harvey Thread Seal Tape, PTFE, White, 520 in L, 3/4 in W, 0.003 in Thick, Density: 0.4 +/- 0.1 g/cc, Temperature Rating: -400 to 500 deg F, Elongation: 50 % Lubricates and seals all threaded joints. White. Non-hardening, non-separating, non-toxic paste. Withstands up to 3000 psi on gases from -50 to 400 deg F and 10,000 psi on liquids from -50 to 500 deg F. For use with water, steam, natural and LP gas, oil, caustics or dilute acid lines of PVC, CPVC, ABS, Cycolac, Polypropylene, iron, steel or copper. NSF and IAPMO listed. Brush included.
Harvey's 044010 Epoxy Putty TAPE SEAL PTFE 1X520          Harvey's 017165-144 Pipe Thread Seal Tape
Hardens like steel in 20 mins. For use on plumbing, underwater, bathroom, auto, electrical and most any place in the home. Stops leaks, easy mix, makes repairs fast. Plugs, seals, mends, patches and is non-toxic. Patches holes, cracks and mends almost anything that is broken. Excellent to rebuild or fabricate parts and as an all-purpose adhesive for metals, wood, glass, masonry, ceramics and many plastics. Do not use with polyethylene or polypropylene. Can be drilled, tapped, filed, sanded and painted like metal. You must press until trapped water is forced out from under putty when repairing leaking pipes. Wet putty will require longer cure time. 0.4 density, 0.003 in thick. Over 50% elongation and chemically inert. Provides a strong tight seal for any threaded joint and permits easy disassembly. Tolerates -400 to 500 deg F. Suitable for use on oxygen systems. Non-toxic and non-flammable. Meets Federal Specification T-27730A. 0.4 density, 0.003 in thick. Over 50% elongation and chemically inert. Provides a strong tight seal for any threaded joint and permits easy disassembly. Tolerates -400 to 500 deg F. Suitable for use on oxygen systems. Non-toxic and non-flammable. Meets Federal Specification T-27730A.
Oatey 31402D Water Line Thread Seal Tape Rectorseal 23710 T-Plus 2 Pipe Thread Sealant Harvey's 029035 Pipe Thread Compound
Provides fast positive seal for water lines, sewage lines and sprinkler systems. Effective on metal or plastic threads. 3 mil thick and density of 1.35 to 1.5 g/cu-cm. Complies with MIL-T-27730A and UL 31 RO. Spool- display carton. RECTORSEAL T Plus 2? pipe thread sealant is a non-setting, multi-purpose compound which contains PTFE, plus synthetic fibers to create a stronger seal. Recommended for use on threaded galvanized steel, iron, brass, copper, aluminum, stainless steel, polyethylene, fiberglass reinforced, PVC, CPVC and ABS pipe. Gray, non-drip paste for pipe joint threads on lines carrying water, steam, air or natural gas. Prevents corrosion to threads. Never hardens, joints separate easily. Contains no lead, non-toxic. Do not apply to plastic threads. Use Harvey? TFE Paste or PTFE Tape made of Teflon on plastic threaded joints. Brushtop bottle.
Harvey's 017065 Pipe Thread Seal Tape Harvey's 039300 Gas Leak Detectors Oatey 31403 Gas Line Thread Tape
Extra heavy, full density tape especially for gas lines. Recommended leak-proof sealant for lines carrying natural gas, propane, butane, water, oil and chemical installations. Use on plastic, stainless steel, aluminum and all metals, ceramic, synthetic rubber, monel and carbon pipe, conduit, valves, bolts, anything with a thread. Suitable for use on oxygen systems. Permits easy disassembly. Pressure rating of 10,000 psi 0.0035 mil thick, tolerates up to -450 to 500 deg F. Meets Federal Specification T-27730A. UL listed. Detects any gas leak in just a few seconds on all types of tubing, valve, cylinders, pressurized tanks or any system under air, gas or oxygen pressure. May be used at temperatures between -50 to 160 deg F. Non-toxic, biodegradable, user friendly, non-corrosive and non-irritating to most skin. Manufactured especially for natural gas, propane, butane, water, oil and chemical lines. Heavier than white tape with density of 1.35 to 1.5 g/cu-cm and 4 mil thick. Complies with MIL-T-22230A (ASG), UL 31 RO, AGA 3226 and CAN/ULC-S642. Spool - dispenser box.
Oatey 30779 All Purpose Pipe Cleaner Rectorseal 25790 Pipe Thread Sealant Oatey 31012 PVC Cement
Oatey Clear Cleaner is a simple and effective cleaner formulated for ABS, PVC and CPVC pipe and fittings that flows freely and evaporates quickly. RECTORSEAL No 5? pipe thread sealant is a soft-set, slow drying compound which seals, lubricates and protects threaded pipe and fittings. It can be pressurized immediately for piping up through 2 in and 100 psi (for natural gas, air and water only) and is ideal for application with a wide variety of fluids and gases, including potable water applications. Recommended for use on threaded galvanized steel, iron, brass, copper, aluminum, stainless steel, polyethylene, fiberglass reinforced and PVC pipe. Regular-bodied clear cement recommended for use on PVC pipe and fittings up to 4 in for schedule 40 and up to 2 in for SCH 80 potable water pressure pipe, gas, conduit, drain waste and vent pipe. Flows freely. Sets up quickly. Apply at temperature 40 to 110 deg F. NSF and UPC listed. Exceeds ASTM D-2564.
Oatey 30999 ABS Cement Oatey 30755 PVC/CPVC Primer Plumb Pak PP854-2 Pipe Joint Compound
Medium-bodied black cement for use on all schedules and classes of ABS pipe and fittings up to 6 in Dia with interference fit. Lo-VOC solvent cement meets California South Coast Air Quality Management District 1168/316A or BAAQMD Method 40 and various environmental requirements. For all non-pressure applications. Oatey purple primer is an NSF listed, aggressive primer for use on PVC and CPVC pipe and fittings. Plumb Pak Pipe Joint Compound, Net Content: 2 oz, Tube
Oatey 31230 Great White Oatey 30818 All-Purpose Cement Oatey 30780 PVC/CPVC Primer/Cleaner
Lubricates and seals all threaded joints. White. Non-hardening, non-separating, non-toxic paste. Withstands up to 3000 psi on gases from -50 to 400 deg F and 10,000 psi on liquids from -50 to 500 deg F. For use with water, steam, natural and LP gas, oil, caustics or dilute acid lines of PVC, CPVC, ABS, Cycolac, Polypropylene, iron, steel or copper. NSF and IAPMO listed. Brush included. Medium bodied milky clear cement for ABS, PVC or CPVC up to 6 in Dia. Recommended for pipe and fittings SCH 40 and 80, potable water, pressure pipe, gas, conduit and DWV. Recommended application temperature 40 to 110 deg F. Meets performance requirements of ASTM D-2564, D-2235, F-493. Check local codes for acceptability of this product. Oatey Purple primer/cleaner is a dual-purpose primer and cleaner for use on all schedules and classes of CPVC and PVC pipe and fittings.
Rectorseal 55910 PVC/CPVC Primer/Cleaner Oatey 31177 Stain-Free Plumbers Putty Harvey's 044150-12 Epoxy Putty
Hi-etch primer specifically formulated for all PVC and CPVC pipe applications such as potable water, pressure pipe, gas, conduit, sewers and drain, waste and vent (DWV). Fast acting, hi-etch primer prepares the surfaces for excellent bonding strength, purple color ensures easy visual check for complete coverage. For use on all sizes and classes in both SCH 40 and 80. NSF approved, LEED compliant, UPC (IAPMO) listed, meets ASTM F 656 specifications. Dauber can. Ideal for use on natural surface materials found in sinks, countertops, strainers and shower bases. Remains flexible, so it is easy to work with and cleans up easily. Hardens like steel in 20 mins. For use on plumbing, underwater, bathroom, auto, electrical and most any place in the home. Stops leaks, easy mix, makes repairs fast. Plugs, seals, mends, patches and is non-toxic. Patches holes, cracks and mends almost anything that is broken. Excellent to rebuild or fabricate parts and as an all-purpose adhesive for metals, wood, glass, masonry, ceramics and many plastics. Do not use with polyethylene or polypropylene. Can be drilled, tapped, filed, sanded and painted like metal. You must press until trapped water is forced out from under putty when repairing leaking pipes. Wet putty will require longer cure time.
Oatey 30890 Rain-R-Shine Oatey 30883 PVC Cement Harvey's 018100-24 P-4
Medium bodied, fast setting, colored cement recommended for PVC pipe and fittings of diameter up to 6 in. Formulated for wet conditions and when quick pressurization and fast installation is needed. For SCH 40 and Schedule 80 potable water pressure pipe, irrigation, gas, conduit and drain waste and vent pipe. Flows freely and covers with a thicker layer than regular PVC cement. Apply at 40 to 110 deg F. Medium bodied gray cement for use on all schedules and classes of PVC pipe and fittings up to 6 in Dia with interference fit. Low VOC solvent cement meets California south coast air quality management district 1168/316A or BAAQMD Method 40 and various environmental requirements. Recommended for potable water, pressure pipe, conduit and DWV. Recommended application temperature of 40 to 110 deg. Regular-bodied, fast set PVC solvent cement designed for use on PVC pressure pipe and fittings up to 4 in. NSF certified for use in potable water, sewer and drain, waste and vent systems and should be applied at temperatures 40 to 110 deg F. UPC listed. Meets requirements of ASTM D-2564. Dauber can.
Harvey's 019050-24 PVC/CPVC Purple Primer Oatey 30750 Pipe Primer/Cleaner Harvey 019100-24 All Purpose Pipe Cleaner
Harvey? purple primer is a professional-grade purple primer for use on all schedules and classes of CPVC and PVC pipe and fittings. Recommended for use with PVC and CPVC pipe and fittings. Formulated to remove dirt and oil from the surface of the piping, as well as soften the piping in preparation for solvent welding. NSF Standard 61 listed for PW, DWV and sewer. Meets ASTM standard F 656. Harvey? pipe cleaner is a fast-acting, all-purpose clear cleaner for ABS, CPVC and PVC pipe and fittings.
PC-Plumbing 025598 2-Part Hand Moldable Epoxy Putty Harvey's 023030 Pipe Joint Compound Oatey 31128 CPVC Pipe and Fitting Cement
PC-Plumbing? epoxy putty is for pipes. use PC-Plumbing? to stop leaks in less than 60 mins. Pre-measured and easy to use and two-part epoxy putty does not require tools. Hand mix and apply. NSF? approved for plumbing repairs and for contact with potable water supply pipes. White thread lubricant and sealant. Brushable paste dries slowly, non-hardening, withstands up to 3000 psi on gases at temps from -50 to 500 deg F. Use on water, steam, natural and LP gas, oils, fuels, dilute acids. Apply to metals, PVC, CPVC, ABS, polypropylene and nylon. all purpose sealant for heavy-duty applications. Warning, never use any pipe thread sealant paste or stick on halogens or oxygen, use PTFE pipe thread tape. Medium bodied, fast setting formula for use on CPVC pipe and tubing with interference fits only. 40 to 110 deg F optimum temperature. For use on smallest diameter through 6 in Dia. Particularly suited to hot water pipe applications up to 200 deg. Meets ASTM-F-493. NSF, UPC and IAPMO listed.
Harvey's 018400-24 PVC Cement Harvey's 025020 Pipe Thread Compound Rectorseal 55902 PVC Cement
Fast setting, medium bodied PVC solvent cement specifically recommended for wet conditions or when quick pressurization is needed. Recommended for pressure pipes such as SCH 40 and 80 Types I and II, up to 6 in. NSF certified for use in potable water, sewer, drain, waste and vent systems. Effective temperature range is 40 to 110 deg F. UPC listed. Meets performance requirements of ASTM D-2564. Dauber can. Use on all metals, plastic PVC, CPVC, ABS and nylon threads. Tolerates -50 to 400 deg F, gas to 3000 psi, liquid to 6000 psi. Soft, slow drying, never seizes, allows easy disassembly. SEALANT for all types of gas lines. Brushtop bottle. Regular body cement specifically formulated for all PVC pipe applications such as potable water, pressure pipe, gas, conduit, sewers and drain, waste and vent (DWV). For use on PVC pipe through 2 in SCH 40 pressure piping and up to and including 4 in SCH 40 non-pressure (DWV) piping, it may also be used for making up transition joints between ABS and PVC in non-pressure (DWV) piping. Dauber top.
Harvey's 043050 Plumbers Putty Harvey's 018500-24 A-6 Harvey's 018450-24 P-6E
Harvey? plumber's putty is an easy-to-use and long-lasting putty widely used for setting bowls, rims, strainers and faucets. It remains flexible and will not harden, shrink, crack or crumble even if the cup is left open. Medium-bodied, medium set, ABS solvent cement designed for use on non-pressure ABS pipe and fittings, SCH 40, Types I and II, up to 6 in. Apply at temperatures 40 to 110 deg F. NSF certified and UPC listed. Meets requirements of ASTM D-2235. Dauber can. For electrical PVC conduit and plumbing PVC applications. Medium bodied, medium set, designed for use on all duct and conduit applications through 6 in Dia. Apply at temperatures 40 to 110 deg F. NSF certified for use in potable water, sewer, drain and waste and vent systems. UPC listed. Meet requirements of ASTM D-2564. Dauber can.
Harvey 019110-24 All Purpose Pipe Cleaner Oatey Fix-It Epoxy Putty Oatey 31910 Flow-Guard Gold
Harvey? pipe cleaner is a fast-acting, all-purpose clear cleaner for ABS, CPVC and PVC pipe and fittings. For sealing, patching and mending compounds. Repairs anything that leaks or is broken. Steel filled, mixes in your hands and hardens in minutes. Ideal for fabricating or rebuilding parts. May be drilled, tapped, filed, sealed and painted. Resists abrasion and a variety of chemicals. Contains no solvents, is non-toxic and will not shrink. Medium bodied CPVC resin in solvent solution formula for copper tube size (CTS) CPVC hot and cold potable water pipe and fittings up to 2 in Dia interference fit only and systems up to 180 deg F. Faster cure time/reduced installation time. May be used without primer where local codes permit. Low VOC with reduced solvent emissions. Exceeds new environmental requirements, meets various California district rules and ASTM F-493.
Plumb Pak PP854-1 Pipe Thread Sealant Oatey 30850 PVC Cement Oatey 31013 PVC Cement
Plumb Pak Pipe Thread Sealant, Net Content: 2 oz, Tube, Applicable Materials: TFE Heavy bodied clear cement for PVC pipe and fittings. Up to 12 in Dia for SCH 40 and 80. Recommended for all grades and types of PVC pipe and fittings, potable water, pressure pipe, gas, conduit and DWV. Helps fill gaps in larger diameter pipe and loose fitting joints. Apply at temperatures 40 to 110 deg F. Exceeds ASTM D-2564. NSF and UPC listed. Regular-bodied clear cement recommended for use on PVC pipe and fittings up to 4 in for schedule 40 and up to 2 in for SCH 80 potable water pressure pipe, gas, conduit, drain waste and vent pipe. Flows freely. Sets up quickly. Apply at temperature 40 to 110 deg F. NSF and UPC listed. Exceeds ASTM D-2564.
Rectorseal 55912 PVC/CPVC Primer/Cleaner Harvey's 018700-24 C-4 Oatey 30756 PVC/CPVC Primer
Hi-etch primer specifically formulated for all PVC and CPVC pipe applications such as potable water, pressure pipe, gas, conduit, sewers and drain, waste and vent (DWV). Fast acting, hi-etch primer prepares the surfaces for excellent bonding strength, purple color ensures easy visual check for complete coverage. For use on all sizes and classes in both SCH 40 and 80. NSF approved, LEED compliant, UPC (IAPMO) listed, meets ASTM F 656 specifications. Dauber can. Regular-bodied, fast set CPVC solvent cement designed for use on CPVC pipe and fittings, schedule 80 and copper tube size, CPVC hot and cold water pipe and fittings up to 4 in Dia. Flows freely and provides a thick layer of cement on the pipe. NSF certified for use in potable water, sewer, drain, waste and vent systems. Should be applied at temperatures 40 to 110 deg F. UPC listed. Meets ASTM F-493. Dauber can. Oatey purple primer is an NSF listed, aggressive primer for use on PVC and CPVC pipe and fittings.
Oatey 30917 ABS Cement Harvey's 018110-24 P-4 Oatey 30782 All Purpose Pipe Cleaner
Medium-bodied ABS resin in solvent solution formula for use on ABS pipe and fittings of diameter up to 6 in. Formulated especially for the hot, arid climates in the western states. Use for all non-pressure applications, for all types and grades of ABS pipe and fittings for DWV. Meets ASTM D-2235. Sales area - only in the western region. Regular-bodied, fast set PVC solvent cement designed for use on PVC pressure pipe and fittings up to 4 in. NSF certified for use in potable water, sewer and drain, waste and vent systems and should be applied at temperatures 40 to 110 deg F. UPC listed. Meets requirements of ASTM D-2564. Dauber can. Oatey Clear Cleaner is a simple and effective cleaner formulated for ABS, PVC and CPVC pipe and fittings that flows freely and evaporates quickly.
Harvey's 018000-24 Mp-6 Rectorseal 55970 Abs/PVC/CPVC Cement Oatey 30900 ABS/PVC Transition Cement
Medium bodied, medium set multi-purpose cement designed for use on PVC, CPVC and ABS pipe and fittings, SCH 40 and 80, Types I and II, up to 6 in. For potable water, pressure pipe, conduit, drain waste and vent pipe. Flows freely and provides a thick layer of cement on the pipe and loose fitting joints. Apply at temperatures 40 to 110 deg F. Dauber can. Medium body multi-purpose cement formulated for use on all PVC, CPVC and ABS pipe applications such as potable water, conduit and drain, waste and vent (DWV). It is for use on all PVC, CPVC and ABS pipe classes for pressure systems through 2 in SCH 40 and non-pressure piping systems through 6 in SCH 40 (excluding SCH 80), also for use on transition joints to join PVC to CPVC and PVC to ABS. Exceeds ASTM F 493 specifications and is LEED compliant. Dauber top. Medium bodied, green PVC resin in solvent solution formula for use in joining all schedules of ABS to PVC pipe and fittings up to 6 in Dia in non-pressure transition joints. Recommended application temperature is 40 to 110 deg F. Meets ASTM D-3138.
Harvey's 018200-24 P-2 PVC Cement Oatey 30783 PVC/CPVC Primer/Cleaner Rectorseal 31631 Tru-Blu
Designed for use on PVC pressure pipe and fittings up to 12 in. Flows freely and provides a thick layer of cement on the pipe. Helps to fill gaps in larger diameter pipe and loose fitting joints. NSF certified for use in potable water, sewer and drain, waste and vent systems and should be applied at temperatures 40 to 110 deg F. UPC listed. Meets requirements of ASTM D-2564. Dauber can. Oatey Purple primer/cleaner is a dual-purpose primer and cleaner for use on all schedules and classes of CPVC and PVC pipe and fittings. RECTORSEAL Tru-Blu? pipe thread sealant with PTFE is a fast dry, flexible set thread sealant designed for high vibration environments such as refrigeration and industrial applications. PTFE has been added to enhance thread lubrication during assembly and break out. Recommended for use on threaded galvanized steel, iron, brass, copper, aluminum, stainless steel, polyethylene, fiberglass reinforced, PVC. Great for use as a positive lock and seal on threaded fasteners.
Oatey 15804 Hercules Pipe Thread Sealant Harvey 019120-12 All Purpose Pipe Cleaner Harvey's 029048 Pipe Thread Compound
Hercules? Megaloc? is a multi-purpose thread sealant made with DuPont? Kevlar? for use on metals, including steel, stainless steel, brass, copper, aluminum and plastics. Megaloc? wipes clean from hands and tools with a dry rag, is odor-free, grit-free and will not separate or settle. Megaloc? does not harden, crack or become brittle rather the joints can be disassembled without damage to pipe, fittings or threads years after the joint was made. Megaloc? is applied easily with a natural bristle brush even at temperatures as low as -25 deg F and performs over a temperature range of -50 to 400 deg F. It provides leakproof hydraulic resistance to 12,000 psi and withstands gas pressure up to 2600 psi. Megaloc? is non-toxic, non-hazardous and non-flammable and contains no lead, heavy metals or volatile solvents. Harvey? pipe cleaner is a fast-acting, all-purpose clear cleaner for ABS, CPVC and PVC pipe and fittings. Gray, non-drip paste for pipe joint threads on lines carrying water, steam, air or natural gas. Prevents corrosion to threads. Never hardens, joints separate easily. Contains no lead, non-toxic. Do not apply to plastic threads. Use Harvey? TFE Paste or PTFE Tape made of Teflon on plastic threaded joints. Brushtop bottle.
Harvey's 019060-24 PVC/CPVC Purple Primer Oatey 31129 CPVC Pipe and Fitting Cement Harvey's 018510-24 A-6
Harvey? purple primer is a professional-grade purple primer for use on all schedules and classes of CPVC and PVC pipe and fittings. Medium bodied, fast setting formula for use on CPVC pipe and tubing with interference fits only. 40 to 110 deg F optimum temperature. For use on smallest diameter through 6 in Dias. Particularly suited to hot water pipe applications up to 200 deg. Meets ASTM-F-493. NSF, UPC and IAPMO listed. Medium-bodied, medium set, ABS solvent cement designed for use on non-pressure ABS pipe and fittings, SCH 40, Types I and II, up to 6 in. Apply at temperatures 40 to 110 deg F. NSF certified and UPC listed. Meets requirements of ASTM D-2235. Dauber can.
Rectorseal 25631 Pipe Thread Sealant Oatey 30821 All-Purpose Cement Brass Craft PSC1094L Gas Leak Detectors
RECTORSEAL No 5? pipe thread sealant is a soft-set, slow drying compound which seals, lubricates and protects threaded pipe and fittings. It can be pressurized immediately for piping up through 2 in and 100 psi (for natural gas, air and water only) and is ideal for application with a wide variety of fluids and gases, including potable water applications. Recommended for use on threaded galvanized steel, iron, brass, copper, aluminum, stainless steel, polyethylene, fiberglass reinforced and PVC pipe. Medium bodied milky clear cement for ABS, PVC or CPVC up to 6 in Dia. Recommended for pipe and fittings SCH 40 and 80, potable water, pressure pipe, gas, conduit and DWV. Recommended application temperature 40 to 110 deg F. Meets performance requirements of ASTM D-2564, D-2235, F-493. Check local codes for acceptability of this product. Used for natural, LP gas, mixed, manufactured and LP gas-air mixtures.
ProPoxy 20 25515 Fast Acting Epoxy Putty Harvey's 023045 Pipe Joint Compound Harvey's 043105 Plumbers Putty
Seals, mends, bonds and repairs. Made of pre-measured, steel reinforced dark gray/black epoxy resin with a contrasting strip of hardener embedded in the center. Two part compounds mixes to form a permanent steel-hard bond. Adheres to almost any surface. Can be drilled, filed, sanded, painted and machined. Applies to damp or wet surfaces. Non-conductive. White thread lubricant and sealant. Brushable paste dries slowly, non-hardening, withstands up to 3000 psi on gases at temps from -50 to 500 deg F. Use on water, steam, natural and LP gas, oils, fuels, dilute acids. Apply to metals, PVC, CPVC, ABS, polypropylene and nylon. all purpose sealant for heavy-duty applications. Warning, never use any pipe thread sealant paste or stick on halogens or oxygen, use PTFE pipe thread tape. Harvey? plumber's putty is an easy-to-use and long-lasting putty widely used for setting bowls, rims, strainers and faucets. It remains flexible and will not harden, shrink, crack or crumble even if the cup is left open.
Harvey's 018410-24 PVC Cement Rectorseal 55914 PVC/CPVC Primer/Cleaner Rectorseal 23631 T-Plus 2
Fast setting, medium bodied PVC solvent cement specifically recommended for wet conditions or when quick pressurization is needed. Recommended for pressure pipes such as SCH 40 and 80 Types I and II, up to 6 in. NSF certified for use in potable water, sewer, drain, waste and vent systems. Effective temperature range is 40 to 110 deg F. UPC listed. Meets performance requirements of ASTM D-2564. Dauber can. Hi-etch primer specifically formulated for all PVC and CPVC pipe applications such as potable water, pressure pipe, gas, conduit, sewers and drain, waste and vent (DWV). Fast acting, hi-etch primer prepares the surfaces for excellent bonding strength, purple color ensures easy visual check for complete coverage. For use on all sizes and classes in both SCH 40 and 80. NSF approved, LEED compliant, UPC (IAPMO) listed, meets ASTM F 656 specifications. Dauber can. RECTORSEAL T Plus 2? pipe thread sealant is a non-setting, multi-purpose compound which contains PTFE, plus synthetic fibers to create a stronger seal. Recommended for use on threaded galvanized steel, iron, brass, copper, aluminum, stainless steel, polyethylene, fiberglass reinforced, PVC, CPVC and ABS pipe.
Harvey's 018210-24 P-12 Harvey's 025050 Pipe Thread Compound Oatey 31911 Flow-Guard Gold
Designed for use on PVC pressure pipe and fittings up to 12 in. Flows freely and provides a thick layer of cement on the pipe. Helps to fill gaps in larger diameter pipe and loose fitting joints. NSF certified for use in potable water, sewer and drain, waste and vent systems and should be applied at temperatures 40 to 110 deg F. UPC listed. Meets requirements of ASTM D-2564. Dauber can. Use on all metals, plastic PVC, CPVC, ABS and nylon threads. Tolerates -50 to 400 deg F, gas to 3000 psi, liquid to 6000 psi. Soft, slow drying, never seizes, allows easy disassembly. SEALANT for all types of gas lines. Brushtop bottle. Medium bodied CPVC resin in solvent solution formula for copper tube size (CTS) CPVC hot and cold potable water pipe and fittings up to 2 in Dia interference fit only and systems up to 180 deg F. Faster cure time/reduced installation time. May be used without primer where local codes permit. Low VOC with reduced solvent emissions. Exceeds new environmental requirements, meets various California district rules and ASTM F-493.
Harvey's 018710-24 C-4 CPVC Cement Oatey 30891 Rain-R-Shine Harvey's 019530 Primer/Cement Pack
Regular-bodied, fast set CPVC solvent cement designed for use on CPVC pipe and fittings, schedule 80 and copper tube size, CPVC hot and cold water pipe and fittings up to 4 in Dia. Flows freely and provides a thick layer of cement on the pipe. NSF certified for use in potable water, sewer, drain, waste and vent systems. Should be applied at temperatures 40 to 110 deg F. UPC listed. Meets ASTM F-493. Dauber can. Medium bodied, fast setting, colored cement recommended for PVC pipe and fittings of diameter up to 6 in. Formulated for wet conditions and when quick pressurization and fast installation is needed. For SCH 40 and Schedule 80 potable water pressure pipe, irrigation, gas, conduit and drain waste and vent pipe. Flows freely and covers with a thicker layer than regular PVC cement. Apply at 40 to 110 deg F. Convenient project pack contains 4 oz purple primer and 4 oz PVC solvent cement. For most PVC pipe projects. Twin pack.
Harvey's 018010-24 Mp-6 Oatey 30812 Bonding Adhesive Oatey 30246 Primer/Cement Pack
Medium bodied, medium set multi-purpose cement designed for use on PVC, CPVC and ABS pipe and fittings SCH 40 and 80, Types I and II, up to 6 in. For potable water, pressure pipe, conduit, drain waste and vent pipe. Flows freely and provides a thick layer of cement on the pipe and loose fitting joints. Apply at temperatures 40 to 110 deg F. Dauber can. Oatey? LO-VOC X-15? PVC bonding adhesive provides a permanent, watertight seal when joining flexible PVC membrane sheets together. The adhesive is ideal for use in tile showers and other concealed water-proofing applications, adhering shower pan liner seams together and dam corners over the shower curb. This fast-acting adhesive creates a strong, lasting bond. Contains one can of regular clear PVC cement and one can of NSF purple primer. Ideal size for most pipe installations.