Home > LAWN & GARDEN > LAWN CARE > DRIP IRRIGATION
Choose a sub category:
DRIP IRRIGATION KITS DRIP EMITTERS DRIP IRRIGATION PIPE
DRIP FITTINGS DRIP FILTERS DRIP MANIFOLDS
DRIP FLOW CONTROLS DRIP PIPE SUPPORTS DRIP IRRIGATION TOOLS
DRIP IRRIGATION TIMERS
Sort By:
Page of 2
STAKE POLY TUBING BLK 1/2X6IN PUNCH HOLE BLACK 2X0.75X0.25IN Rainbird RISER-1PK Preassembled Riser Stake
Rain Bird Stake, 6-3/4 in Length, Plastic, Black, Suitable for: 1/2 in Poly Tubing Rain Bird Hole Punch, Plastic, Black, Suitable for: Drippers, 1/4 in Fittings Preassembled riser and stake for use with Rain Bird 10 - 32 threaded emission devices.
Rainbird EFC25-1PK Tubing Coupling Rainbird EC50-2PK End Closure Stretch 'N Lock S5600UB Tubing Coupling
Compression fitting for use with all 1/2 in drip tubing brands. The Rain Bird EC50 1/2 in end closure is used to close a drip line system without the need of cutting the tubing which can later on be used to extend your irrigation system. Used with 1/2 in tubing or 1/2 in emitter tubing to allow for easy flushing and draining of the system. Unique design accommodates a range of hose diameters and will not blow off hose with water pressures up to 100 psi. For use with 1/2 to 0.710 in (0.520 to 0.620 in ID) hose.
Easy Fit EFE25-1PK Non-Threaded Tubing Elbow Raindrip R302CT Tube End Clamp STAKE MICRO WATERING ADJ 18IN
Compression fitting for use with all 1/2 in drip tubing brands. Used to shut-off the end of 1/4 in tubing. Removes easily. Rain Bird Staked Riser, Adjustable, 18 in Length, Poly, Black, Suitable for: 1/4 in Threaded Drippers and Micro Sprays
Raindrip R645CT Double Duty Double End Hole Plug Raindrip R336CT Riser Adapter ADAPTER DRIP FHT BLK 3/4X1/4IN
Double-ended, double-duty plugs seal either large or small holes in 1/2 in, 5/8 in or 0.71 in hose. Connects Raindrip low-flow sprinklers to 1/2 in MPT sprinkler risers. 1/2 in FPT inlet. 10-32 FNFT outlet. Includes filter washer. Rain Bird Drip Irrigation Adapter, 3/4 x 1/4 in Connection, FHT x Tube Connection, Plastic, Black, 40 psi Pressure, Suitable for: 3/4 in Male Threaded Pipe Components
Rainbird Easy Fit EFT25-1PK Non-Threaded Tubing Tee Raindrip R380CT Support Stake Raindrip R390CT Tube Support Clamp
Universal compression fitting tee for use with all 1/2 in drip tubing brands. 4 in plastic stakes hold 1/4 in tubing in place next to plants. Black poly clamps molded to fit 1/4 in tubing. Includes pre-inserted nail.
ADAPTER PP-DRIP BLK 3/4X1/2IN COUPLING EASY FIT W/PLUG 1/2IN COUPLING FHTXEZ FIT BLK 3/4IN
Rain Bird Drip Irrigation Adapter, 3/4 in x 1/2 in and 5/8 in Connection, FPT x Tube Connection, Polyethylene, Black, 40 psi Pressure, Suitable for: 1/2 to 5/8 in Tubing Rain Bird Flush Cap Hose Plug, Universal, 1/2, 5/8 in Connection, Compression Connection, Plastic, Suitable for: 1/2 in or 5/8 in Poly Drip Tubing Rain Bird Hose Adapter, 3/4 in Nominal, FHT x Tube Connection, 70 psi Pressure, Plastic, Black, Suitable for: 1/2 to 5/8 in Tubing
Raindrip R338CT Tap Off Raindrip R312CT Hose Connector Rainbird TS25-10PK Tubing Stake With Bug Guard
Connects 1/4 in tubing to existing 1/2 in MPT underground sprinkler riser. 1/2 in FPT Inlet. 1/4 in compression and 1/2 in MPT outlet. Includes filter washer. Double barbed design, allows use with higher pressures, join or connect two lengths of line. 1/4 in connector used with 1/4 in (0.160 to 0.197 in ID) tube only. Double barb design allows water pressures up to 50 psi. Stake 1/4 in tubing at desired locations or secure spot watering emitters. Place bug guard at end to prevent bugs and debris from clogging tubing.
Raindrip R326CT Swivel Tubing Adapter With Washer VALVE SH-OFF BARBED BLK 1/4IN Raindrip R325CT Hose Swivel Adapter With Filter Washer
Swivel adaptors join tubing to threaded adaptor. For use with 1/4 in (0.245 in OD) tube only. Connects 1/4 in vinyl tubing to 3/4 in male pipe thread. R326CT/R326CB includes washer. 3/4 in pipe threaded swivel x 1/4 in compression adaptor. This valve easily adjusts or shuts off flow in 1/4 in drip tubing runs to different sections of your plant watering area. Avoid over or under-watering of plants with different moisture needs in a timed drip zone. Barbed ends permit easy, leak-free insertion into drip tubing. Top cap turns to adjust or completely shut-off water flow, ideal for use when making repairs. Constructed of high quality, long-lasting UV resistant materials. For use with 1/4 in (0.16 in I.D.) tube only. Connects 1/4 in tubing to faucet or other 3/4 in male hose thread. Includes filter washer.
Raindrip R320CT Hose Swivel Adapter With Filter Washer Rainbird MSF-2PK Micro Spray Rainbird BC50-4PK Hose Coupling
3/4 in hose thread swivel x 1/2 in compression adaptor connects 1/2 in poly hose to faucet or other 3/4 in male hose thread. Includes filter washer. For use with 1/2 in (0.62 in to 0.630 in OD) hose only. Green compression ring. Ideal for shrub plantings, trees, containers and flower beds. Connect 2 pieces of 1/2 in tubing.
Raindrip R314CT Tubing Elbow Raindrip R303CT Hose End Plug With Cap Rainbird MSH-2PK Micro Spray
Double barbed design allows water pressure up to 50 psi. Closes ends of 1/2 in (0.620 to 0.630 in OD) poly hose when frequent flushing is necessary. Green compression ring. Made from ABS. For water pressure up to 60 psi. Ideal for shrub plantings, trees, containers and flower beds.
Raindrip R307CT Tube to Hose Tee Raindrip R301CT Hose End Clamp Raindrip R310CT Tubing Coupling
Double barbed design allows use with higher water pressures. For use with 1/4 in (0.160 to 0.197 in ID) tube only. Creates a 1/4 in branch from a 1/4 in tube or two 1/4 in branches from a 1/2 in hose. For water pressures up to 50 psi. Used to shut-off the end of 1/2 in rain drip poly hose. Removes easily. Join or connect two lengths hose. Made from ABS. For water pressure up to 60 psi.
Rainbird BT50-4PK Non-Threaded Tubing Tee Rainbird TP25-10PK Goof Non-Threaded Tubing Plug Rainbird BE50-4PK Drip Watering Non-Threaded Hose Elbow
Connect 3 pieces of 1/2 in tubing in a "T" shape. Use as an end closure for 1/4 in tubing or as a side plug for 1/2 in tubing. Connect 2 pieces of 1/2 in tubing in an "L" shape.
SPRAY MICRO QTR PTRN BLK 13FT Raindrip R381CT Support Stake Raindrip R315CT Tubing Elbow With Green Compression Ring
Rain Bird Fan Micro Spray, Riser Mount, Part-Circle, 70 psi Operating, 0 to 31 gph Flow Rate, 0 to 10 ft Coverage Diameter, Black, Plastic Base, Includes: (2) Fan Micro Sprays Heavy-duty plastic stakes hold 1/4 in lines in place. For water pressure up to 60 psi. Ends are color-coded for easy size identification.
Raindrip R384CT Drip Watering Stake With Riser ADAPTER RISER F/DRIP BLK 0.5IN Rainbird BT25-10PK Non-Threaded Tubing Tee
Heavy-duty 13 in stake with adjustable 8 in rigid riser for use with low-flow sprinklers and spray heads with 10-32 NFT inlets. Just screw the sprinkler/sprayer into the rigid riser moving it up or down to water above plants. Constructed of high-density polyethylene and polypropylene. Riser adapter for drip and sprinkler watering allows both irrigation methods to be used at once, covering all plants effectively. Connect 3 pieces of 1/4 in tubing in a "T" shape or tap into the side of 1/2 in tubing.
SPRAY MICRO FULL PTRN 13.5FT  SPRAY MICRO HALF PTRN 10.5FT  VALVE BARBED MALE BLACK 1/2IN
Apply drip watering efficiency in more places around your landscaping with this versatile staked riser with adjustable micro spray flow and height. The riser adjusts up to 18 in H and the spray adjusts from 0 to 10 ft throw, allowing you to direct water exactly where you need it in a wide variety of planting areas. It is ideal for taller plants such as shrubs and bushes well as for use in flower beds and ground cover where you may want broader coverage. Includes a sturdy 8 in stake plus 36 in L of 1/4 in tubing with barbed fitting for quick attachment to 1/2 in drip irrigation tubing. Apply drip watering efficiency in more places around your landscaping with this versatile staked riser with adjustable micro spray flow and height. The riser adjusts up to 18 in H and the spray adjusts from 0 to 10 ft throw, allowing you to direct water exactly where you need it in a wide variety of planting areas. It is ideal for taller plants such as shrubs and bushes well as for use in flower beds and ground cover where you may want broader coverage. Includes a sturdy 8 in stake plus 36 in L of 1/4 in tubing with barbed fitting for quick attachment to 1/2 in drip irrigation tubing. Easily adjust or shut off flow in 1/2 in or 5/8 in drip tubing runs to different sections of your plant watering area. Avoid over- or under-watering of plants with different moisture needs in the zone. Top cap turns to adjust flow. Barbed ends permit easy, leak-free insertion into drip tubing.
Raindrip R630CT Hole Punch With Hole Plug MISTER ADJ 360DEG BLACK 1.5FT MISTER 360DEG W/12IN TUBE 3FT
Designed for comfortable use, punches holes in 1/2 in, 5/8 in or 0.710 in hose to insert PC drippers or 1/4 in fittings. Handle has socket for installing and removing Micro spray jets. Card includes hole plugs. Rain Bird Mister, Threaded, Specifications: 0 to 31 gph Flow Rate, 10 to 30 psi Operating Pressure, 10-32 Threaded Inlet Type, 0 to 1-1/2 in Throw Radius, Plastic, Black Rain Bird Mister Spray, 1/4 in Connection, Barb Connection, Spray Pattern: Full-Circle, Mist, 360 deg Spray Angle, 0 to 6 gph Flow Rate, Plastic, Black, Dimensions: 12 x 1/4 x 1/4 in
SPRAY MICRO QTR PATTERN 10FT  Rainbird BC25-10PK Hose Coupling Raindrip R305CT Tubing Tee
Apply drip watering efficiency in more places around your landscaping with this versatile staked riser with adjustable micro spray flow and height. The riser adjusts up to 18 in H and the spray adjusts from 0 to 10 ft throw, allowing you to direct water exactly where you need it in a wide variety of planting areas. It is ideal for taller plants such as shrubs and bushes well as for use in flower beds and ground cover where you may want broader coverage. Includes a sturdy 8 in stake plus 36 in L of 1/4 in tubing with barbed fitting for quick attachment to 1/2 in drip irrigation tubing. Connect 2 pieces of 1/4 in tubing or tap into the side of 1/2 in tubing. Compression tees made from ABS. For water pressure up to 60 psi.
Raindrip R612CT Double Barbed Value TEE FHT X UNIV BLACK 3/4X1/2IN BUBBLER MICRO-UMBRELA FULL 3FT
Adjust, balances or shuts off water flow to watering circuits, zones or plants. For use with 1/4 in (0.160 in ID) vinyl tubing only. Double barbed design allows water pressure up to 50 psi. Rain Bird Drip Irrigation Tee with FHT Adapter, Universal, 3/4 x 1/2 in Connection, FHT x Compression Connection, Polyethylene, Black, 0 to 60 psi Pressure, Suitable for: 1/2 in End Closure, 3/4 in x 1/2 in FHT x MTH Adapter, 1/2 to 5/8 in Tubing Rain Bird Micro Umbrella Bubbler, Barb Connection, Staked Dripper Type, 70 psi Maximum, 0 to 35 gph Gallons per Hour, Spray Pattern: Full-Circle, 1/4 in Tubing Size, Black, Includes: (4) Micro Umbrella Bubblers
Rainbird MBH-4PK Micro Bubbler Rainbird MBF-4PK Micro Bubbler MANIFOLD 6-PORT BLACK 1/2IN
Half circle, Ideal for shrub plantings, trees, containers and flower beds. Connect to 1/2 in tubing with barbed coupling (included) and 1/4 in tubing. Spray pattern 180 deg rotation. Connect to 1/2 in tubing with barbed coupling (included) and 1/4 in tubing. Rain Bird Free-Flow Manifold, 1/2 x 1/4 in, FPT x Barb, 6-Port, 50 psi, Gallons per Minute: 2 gpm, Black
Raindrip R334CT Swivel Tee Assembly Raindrip R153CT Fan Spray Bubbler Raindrip R156CT Adjustable Stream Spray Bubbler
Swivel tee assembly for 1/2 in double drip manifold. Connects two 1/2 in poly hose to a 1/2 in sprinkler riser. Includes tee, filter, 3-way connector and 2 flow controls. Convert existing 1/2 in underground sprinkler systems to low flow watering where a drip circuit can't be set up. Adjustable bubblers are available in stream spray with a maximum spray diameter of 3 ft at 30 psi or for finer water droplets, a fan spray with spray diameter up to 13 ft at 30 psi. Bubbler flow rates are adjustable from 0 - 13 gph at 30 psi for stream type and from 0 - 24 gph at 30 psi for the fan spray. These features allow the higher flow rates required when watering large and small plants on the same circuit. Convert existing 1/2 in underground sprinkler systems to low flow watering where a drip circuit can't be set up. Available in stream spray with a maximum spray diameter of 3 ft at 30 psi or for finer water droplets, a fan spray, with spray diameter up to 13 ft at 30 psi. Adjustable bubbler rotates easily to preferred water flow, from full coverage for shrubs and large potted trees to shut-off position.
Rainbird MANIF2-1PK Outlet Manifold Rainbird SW10-10PK Single Outlet Spot Watering Emitter DRIPPER SPOT WTRNG BLUE 0.5GPH
2 gph, 1/2 in FPT 6-port metered manifold. For drip irrigation systems. Installs onto 1/2 in riser. Connects up to 6 micro watering devices to a sprinkler riser. Adds supplemental watering to individual plants. The drippers' 0.5 GPH flow is ideal for small containers and plants with relatively low moisture needs.
Rainbird SW20-10PK Single Outlet Spot Watering Emitter Rainbird GS50-10PK Tubing Stake SPRINKLER ROTARY FULL PTRN 3FT
Adds supplemental watering to individual plants. Heavy-gauge galvanized wire secures 1/2 in tubing to the ground.10 Pack. Rain Bird Rotary Micro Sprinkler, Riser Mount, 1/4 in Connection, Full-Circle, 0 to 70 psi Operating, 0 to 33 gph Flow Rate, 0 to 14 ft Coverage Diameter, Black, Includes: (4) Rotary Micro Sprinklers
Rainbird T22-50 Drip Watering Tubing Raindrip R180CT Adjustable Low Flow Steam Sprayer Raindrip R187CT Low Flow Drip Irrigation Sprayer
Use with spot watering emitters or to run water to emitter tubing. Sprays 12 individual streams over a circular area with an adjustable diameter of up to 18 ft. For windy conditions, sprayer inlet size is 10-32 NFT. Featuring a knob to adjust the flow (4 to 20 gph at 25 psi) and diameter of spray. Uniformly sprays water over a semicircular area with an adjustable radius of up to 7 ft. Sprayer inlet size of 10-32 NFT. Featuring a knob to adjust the flow (4 to 20 gph at 25 psi) and diameter of spray.
Raindrip R191CT Low Flow Drip Irrigation Sprayer Raindrip R184CT Adjustable Rotary Sprinkler Rainbird ET-1PK Emitter Tool
Uniformly sprays water over a semicircular area with an adjustable radius of up to 8 ft. Sprayer inlet size of 10-32 NFT. Featuring a knob to adjust the flow (4 to 20 gph at 25 psi) and diameter of spray. Uniformly sprays water over a full circle with an adjustable diameter of up to 15 ft. Sprinkler Inlet size of 10-32 NFT. Featuring a knob to adjust the flow (4 to 20 gph at 25 psi) and diameter of spray. Easy way to add or remove spot watering emitters, fittings and plugs.
Rain Drip 016005P Raindrip Drip Watering Tubing PREVENTER BACKFLOW FHT 3/4IN  REGULATOR FHT 25PSI BLK 3/4IN
Remains strong in the hot sun, flexible in cool temperatures. Black Color. Quickly and easily connects to any 3/4 male pipe threaded (MPT) outdoor faucet, garden hose or component. Safely prevents backward flow of water from a drip irrigation system into your potable/clean drinking water supply. Stainless steel 150 mesh filter catches debris to help keep system functioning properly. Simply thread into place; take care fitting is fully tightened so rubber gasket can correctly seal assuring leak-proof performance. Constructed of highly durable UV and chemical-resistant materials to assure long life. Rain Bird Pressure Regulator, FHT Inlet Connection Type, MHT Outlet Connection Type, 20 gpm Flow Rate, 25 psi Pressure, Black, 1.3 in Length, 10.2 in Width, 6-1/2 in Height
BUBBLER DRIP IRRG FULL BLK 3FT Raindrip R166CT Drip Watering Mister With 4 in Riser Raindrip R116CT In-Line Partially Pressure Compensating Mini Dripper
Rain Bird Micro Bubbler, Barb Connection, Self-Piercing Dripper Type, 40 psi Maximum, 0 to 13 gph Gallons per Hour, Spray Pattern: Full-Circle, 1/2 in Tubing Size, Black, Includes: (4) Micro Bubblers Adjustable mister and 4 in high-density polyethylene riser with 1/4 in barbed adaptors. Adjustable from fine to heavy mist up to 3 ft Dia. Flow rate 4 to 7 gph at 25 psi. Designed for use on level ground and shorter circuits. Ideal for heavy soil (clay).
Raindrip R108CT In-Line Pressure Compensating Dripper Raindrip R110CT Dripper Raindrip R112CT In-Line Pressure Compensating Dripper
For landscape and container plants. Maintains constant flow rate even on hillsides or long circuits. Red (1/2 gph) - ideal for heavy soil (clay). Black (1 gph) - ideal for medium soil (loam) Green (2 gph) - ideal for light soil (sandy). For landscape and container plants. Maintains constant flow rate even on hillsides or long circuits. Red (1/2GPH) - Ideal for heavy soil (clay). Black-(1GPH) - Ideal for medium soil(loam) Green -(2GPH) Ideal for light soil (sandy). For landscape and container plants. Maintains constant flow rate even on hillsides or long circuits. Red (1/2 gph) - ideal for heavy soil (clay). Black (1 gph) - ideal for medium soil(loam) Green (2 gph) - ideal for light soil (sandy).
Raindrip R463CT Pressure Regulator Rain Drip 052005P Drip Watering Hoses Raindrip 016010T Drip Tubing
Flexible pressure regulators for drip watering systems, sprinklers and misters only. Molded high-impact ABS. Professional quality Raindrip 1/2 in hose is made from linear, low-density polyethylene (poly). Composed of 2.2% carbon black and UV inhibitors, it can be left out year-round, buried or on the surface, in any weather. Great to hose made from reprocessed materials. Remains strong in the hot sun, flexible in cool temperatures. Color-Black.
Raindrip 63100UB Professional Hole Punch FILTER Y ILN MNPT BLACK 3/4IN MANIFOLD 9-PORT BLACK 1/2IN
Designed for comfortable use. Punches holes 1/2 in, 5/8 in or 0.710 in hose to insert PC drippers or 1/4 in fittings. Rain Bird Inline Filter, MNPT Inlet Connection Type, MNPT Outlet Connection Type, 0.2 to 5 gpm Flow Rate, 150 psi Pressure, Black, 2-1/8 in Length, 6 in Width, 4-3/8 in Height Rain Bird Manifold, 1/2 x 1/4 in Connection, FPT x Barb Connection, 9 Ports, 25 psi Maximum, 1/4 in Tubing Size, ABS, Black
Rainbird T63-100 Drip Watering Tubing CUTTER-HOLE PUNCH LTPURP 8.4IN Raindrip R605DT Y-Filter/Fertilizer Applicator
1/2 in blank (distribution) tubing is used to run water from an outside faucet or other water source to the planting area. Kink-resistant materials help provide dependable water flow. Connect tubing sections and 1/2 in emitter tubing with Rain Bird 1/2 in barbed or compression fittings. To place watering devices near plants, add 1/4 in tubing runs by tapping into the side of this 1/2 in tubing with 1/4 in barbed couplings. Rain Bird Hole Punch and Tubing Cutter, Ergonomic Handle, Steel, Purple, Suitable for: Drippers, 1/4 in Fittings Removes dirt particles from water supply, feeds plants automatically as they are watered. Handles up to 720 GPH through 150 mesh (100 micron) stainless steel or poly screen element. Recommended for well water. Includes hose/pipe swivel coupling. Filter inlets and outlets are NPT.