|
|
|
|
|
|
|
|
|
|
|
|
|
|
1/4-20 male threads on both ends, 1/4 in rod Dia.
|
Allows ball to float free. Designed for use on exposed cattle watering systems. Cattle can nuzzle ball without harm to or activation of valve. Assembly consists of thumb screw, hooks, swivel joint and stem, threaded at one end. 1/4-20 thread on stem/thumb screw.
|
Corrosion-resistant, lightweight and suitable for a broad range of destructive fluids. Suitable for 175 deg F. For open tank service only. Orange for ultra-violet light protection. 1/4-20 spud connector, for 1/2 in and 3/4 in Robert or Flippen valves.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Use to convert tanks or barrels into automatic stock waterers. Requires little attention and keeps open tanks filled with freshwater. Adjustable to several heights. Install by hanging plated brackets over edge of tank. Designed to operate on pressure up to 70 psi or from gravity flow with optional special orifice. Outer housing molded of high impact resin. Withstands weather and abuse. Durable molded float. Two sets of brackets. Fits poly tanks and steel tanks. 300 gph.
|
Highly corrosion-resistant. Unaffected by salts and caustic fluids. All injection molded polyethylene construction. Resistant to sunlight deterioration. Maximum temperature 140 deg F.
|
Allows ball to float free. Designed for use on exposed cattle watering systems. Cattle can nuzzle ball without harm to or activation of valve. Assembly consists of thumb screw, hooks, swivel joint and stem threaded at one end.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Series ST750 standard duty mechanical float valves are used in commercial, industrial and agricultural applications for controlling water flow. It has a bronze body construction with 3/4 in male NPT threaded end connections, cotter pin pivot arm assembly, replaceable seals and replaceable plungers. This Series is ideal for use in air conditioning, refrigeration and irrigation systems.
|
Two tapered threads on inlet for mating with pipe and a straight thread for a locknut. Machined flange for support against tank wall. All bronze bodies. Serrated arms for quick and easy adjustment of water level (all sizes). High tensile manganese bronze long and short arms. Stainless steel pivot bolt assembly. No-jam, single lever action. Replaceable seals. Free discharge flow capacity. No R400-1/2 12 gpm at 35 psi, 22 gpm at 85 psi. No R400-3/4 21 gpm at 35 psi, 39.9 gpm at 85 psi.
|
The Rubbermaid Commercial stock tank drain plug kit built tough for superior performance and long-lasting durability in all kinds of weather extremes.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Use to convert tanks or barrels into automatic stock waterers. Requires little attention and keeps open tanks filled with freshwater. Adjustable to several heights. Install by hanging plated brackets over edge of tank. Designed to operate on pressure up to 70 psi or from gravity flow with optional special orifice. Precision die-cast outer housing. Durable molded float. Includes two sets of brackets. Fits poly tanks and steel tanks. 300 gph. Installation instructions included.
|
Fits all sizes Rubbermaid stock tanks.
|
Series ST1000 standard duty mechanical float valves are used in commercial, industrial and agricultural applications for controlling water flow. It has a bronze body construction with 1 in male NPT threaded end connections, cotter pin pivot arm assembly, replaceable seals and replaceable plungers. This Series is ideal for use in air conditioning, refrigeration and irrigation systems.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Use to convert tanks or barrels into automatic stock waterers. Requires little attention and keeps open tanks filled with freshwater. Adjustable to several heights. Install by hanging plated brackets over edge of tank. Designed to operate on pressure up to 70 psi or from gravity flow with optional special orifice. Precision die-cast, durable molded float and molded non-siphoning unit. Complies with basic anti-siphoning regulations. Has a replaceable non-siphoning unit. 300 gph.
|
Two tapered threads on inlet for mating with pipe and a straight thread for a locknut. Machined flange for support against tank wall. All bronze bodies. Serrated arms for quick and easy adjustment of water level (all sizes). High tensile manganese bronze long and short arms. Stainless steel pivot bolt assembly. No-jam, single lever action. Replaceable seals. Free discharge flow capacity. No R400-1/2 12 gpm at 35 psi, 22 gpm at 85 psi. No R400-3/4 21 gpm at 35 psi, 39.9 gpm at 85 psi.
|
Heats the water, keeps open an ice-free area of approximately 30 in Dia down to sub-zero temperatures. Thermostatically controlled to operate only when necessary. Heavy-duty float will not rust, corrode or leak. Special 10 in heating element. 6 ft heavy-duty grounded wire. For use in metal tanks only. Individually packed. Rated at 120 AC voltage and 1500 W power.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Thermostatically controlled to operate only when necessary. Designed to rest in the bottom of the tank unnoticed by livestock. Protective sturdy cage permits use in all tanks. Safe in plastic.
|
Designed for multiple uses around the farm. Constructed of cast aluminum for ultimate efficiency and safety. Thermostatically controlled to operate only when necessary. Safe in plastic. Extra watts for extremely cold climates or oversized bird baths. Good for use in containers up to 25 gal.
|
Freeland Stock Tank, 27 gal, Black, 20 in W, 42 in D, 12 in H
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Series ST2000 standard duty mechanical float valves are used in commercial, industrial and agricultural applications for controlling water flow. It has a bronze body construction with 2 in female NPT threaded end connections, cotter pin pivot arm assembly, replaceable seals and replaceable plungers. This Series is ideal for use in air conditioning, refrigeration and irrigation systems.
|
Series ST1250 standard duty mechanical float valves are used in commercial, industrial and agricultural applications for controlling water flow. It has a bronze body construction with 1-1/4 in female NPT threaded end connections, cotter pin pivot arm assembly, replaceable seals and replaceable plungers. This Series is ideal for use in air conditioning, refrigeration and irrigation systems.
|
The Rubbermaid Commercial stock tank, 50 gal, has a sleek appearance and smooth black color. This 50 gal stock tank features an easy-to-use drain and seamless structural foam construction that resists weathering and cracking for long use.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Behlen Country Stock Tank, 60 gal, Foam/Rigid Poly, Black, 31 in W, 52 in D, 14 in H
|
Freeland Stock Tank, 75 gal, 31 in W, 44 in D, 25 in H
|
The Rubbermaid Commercial stock tank is constructed of seamless structural foam for outstanding durability. This 100 gal water tank features 1-1/2 in oversized drain for easy cleaning. Built for long-lasting outdoor use, these stock tanks resist weathering and cracking.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
High-quality, heavy-duty, impact-resistant, virtually unbreakable oval containers. Environmental friendly, heat and cold-resistant, will not crack. Chemically neutral, holds fertilizers, oil solvents, animal feeds and more. UV-resistant, withstands years of outdoor exposure. Holds heavy materials, i.e. sand, cement, produce, scrap metal. No rust, no discoloration or maintenance, lightweight. Smooth edges, safe for animals and easy handling by people. Low cost, economical purchases and long performance time.
|
|
One piece molded all-poly tank. Extra heavy-duty, molded rim for additional strength. Poly is FDA food-grade approved, tested to -20 deg F, corrosion-free, impact-resistant and recyclable. Tank contains the proper amount of UV inhibitor to prevent deterioration from sunlight. Ideal for all watering needs.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Behlen Country Shallow Utility Tank with Handle, 28 gal, Steel, Galvanized, 18 in W, 35 in D, 12 in H
|
One-piece molded all-poly tank. Extra heavy-duty, molded rim for additional strength, with "sealed" top lip for easy dumping. Heavy-duty, molded-in aluminum drain fitting and 1-1/4 in poly drain plug. Poly is FDA food-grade approved, tested to -20 deg F, corrosion-free, impact-resistant and recyclable. Tank contains the proper amount of UV inhibitor to prevent deterioration from sunlight. Ideal for all watering needs.
|
Manufactured with premium, G90 galvanized, corrugated sidewalls and extra heavy (20 ga), galvanized tank bottoms. Features a heavy reinforced steel tube rolled into the top lip for added strength and durability. For dairy or beef cattle, hogs, sheep or horses. 1 ft deep.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
One-piece molded all-poly tank. Extra heavy-duty, molded rim for additional strength, with "sealed" top lip for easy dumping. Heavy-duty, molded-in aluminum drain fitting and 1-1/4 in poly drain plug. Poly is FDA food-grade approved, tested to -20 deg F, corrosion-free, impact-resistant and recyclable. Tank contains the proper amount of UV inhibitor to prevent deterioration from sunlight. Ideal for all watering needs.
|
Manufactured with premium, G90 galvanized, corrugated sidewalls and extra heavy (20 ga), galvanized tank bottoms. Features a heavy reinforced steel tube rolled into the top lip for added strength and durability. For dairy or beef cattle, hogs, sheep or horses. 2 ft deep.
|
Behlen Country Utility Tank with Handle, 55 gal, Steel, Galvanized, 18 in W, 35 in D, 24 in H
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Built tough for great performance and long-lasting durability in all kinds of weather extremes. Seamless construction. Oversize drain plug makes for easy drainage and cleaning of stock tank. 1-1/2 in oversize drain. No.4242-00 53 in L x 31 in W x 25 in H. No.4245-00 58 in L x 39 in W x 25 in H.
|
Freeland Stock Tank, 150 gal, Poly, 42 in W, 57 in D, 25 in H
|
Exciting new and fun stock tank size made from prime, heavy-duty galvanized steel. These galvanized tanks have unlimited uses and are made in the USA.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
The Behlen Country galvanized stock tanks are ideal for all your livestock watering needs. Built to endure the most severe farm and ranch conditions. Corrosion-resistant, heavy-zinc coating assures long life. Rigid sidewalls have both ribs and corrugations for maximum strength. Heavy galvanized tank bottoms (20 ga). Heavy, reinforced steel tube rolled into the top lip for added strength and durability.
|
Manufactured with premium, G90 galvanized, corrugated sidewalls and extra heavy (20 ga.), galvanized tank bottoms. Features a heavy reinforced steel tube rolled into the top lip for added strength and durability. For dairy or beef cattle, hogs, sheep, or horses. 2' deep. Great for locations where extreme weather conditions present a serious corrosion problem. The protective, heavy, shiny, zinc coating help tank last longer.
|
One-piece molded all-poly tank. Extra heavy-duty, molded rim for additional strength, with "sealed" top lip for easy dumping. Heavy-duty, molded-in aluminum drain fitting and 1-1/4 in poly drain plug. Poly is FDA food-grade approved, tested to -20 deg F, corrosion-free, impact-resistant and recyclable. Tank contains the proper amount of UV inhibitor to prevent deterioration from sunlight. Ideal for all watering needs.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Built tough for ideal performance and long lasting durability in all kinds of weather extremes. Oversize drain plug makes for easy drainage and cleaning of stock tank. Seamless construction for durability. High-density resin stock tank fits all your watering needs. 63-1/4 in outside length. 69 in outside width. 25 in outside height.
|
Behlen Country Stock Tank, 300 gal, Foam/Rigid Poly, Black, 48 in W, 82 in D, 26 in H
|
The Behlen Country galvanized stock tanks are ideal for all your livestock watering needs. Built to endure the most severe farm and ranch conditions. Corrosion-resistant, heavy-zinc coating assures long life. Rigid sidewalls have both ribs and corrugations for maximum strength. Heavy galvanized tank bottoms (20 ga). Heavy, reinforced steel tube rolled into the top lip for added strength and durability.
|
|
|
Headquarters Palm City, Jensen Beach, Stuart
