|
|
|
|
|
|
|
|
|
|
|
|
|
|
Fits the 10 Frame Langstroth hives and seamlessly integrate with all Harvest Lane Honey bottom boards. With a small and medium gap, the reducer can be used to completely close off your hive for transport or as a protection from pesticide spraying. Reducers are also used to reduce the entrance of a hive during new package introduction or to prevent the hive from having to much cold air during winter. Standard usage is one reducer per hive.
|
Smoker pellets are designed to be used in HLH smoker. The best way to light smoking pellets is to use a torch lighter. A small palm full is all you will require for one smoker per use.
|
Built from sturdy, food-grade plastic to make it resistant to wax moths and for easy acceptance in the hive. It features a text a textured cell pattern and 100% beeswax coating. Made in the USA of food grade plastic. Use with 9-1/8" Deep Brood Foundations with Groove Tops and Groove Bottoms and 9-1/2" Deep Brood Boxes.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Harvest Lane Honey Bee Hive Foundation, Plastic/Wood, Suitable for: 6-7/8 in Medium Honey Super Boxes
|
A plastic angled shaft with steel tines used to puncture capped honey prior to extraction. It allows you to open cells that an ordinary uncapping knife won't reach.
|
The Harvest Lane Honey 4% pollen feeding pattie stimulates growth and production. Feed in the spring, fall and winter. Great for new packages of bees.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Made of steel with a pry and crow bar. It's instrumental in prying open your hive. Separating frames from the hive and scraping off excess and wild comb.
|
Use with 10 frame Langstroth hives. Place the queen excluder between honey and brood chambers to prevent the queen from laying eggs in honey. The excluder will also allow you to find the queen easily on hive inspections. Do not add until the brood is established.
|
Helps you sweep bees away from your hive and gently remove bees from un-wanted spaces.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Harvest Lane Honey Bear Jar, Specifications: 8 oz Capacity
|
Ideal for feeding bees in Langstroth Top Bar or other non-traditional hives. Use outside the hive to refuel your hive. Simply fill and attach a standard canning jar for effortless external feeding. Not ideal for colder climates.
|
Used to help pull frames from the hive without crushing bees.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Ideal for feeding bees in Langstroth top bar or other non-traditional hives. Use outside the hive to refuel your hive. Simply fill and attach a standard canning jar for effortless external feeding. Not ideal for colder climates.
|
Use with 10 frame Langstroth hives. Place the queen excluder between honey and brood chambers to prevent the queen from laying eggs in honey. The excluder will also allow you to find the queen easily on hive inspections. Do not add until the brood is established.
|
Protect your clothing while extracting honey. Made extra long with ties to fit most sizes.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Includes Honey B feeding stimulant, feed to bees during the spring, winter and nectar dearths. Remove during honey flow. HLH Bee feed does not separate. It is pre-mixed and ready to pour into any feeder. Made up of only certified ingredients. Honey B Healthy aids in over wintering survival. If you notice robbing, switch to an inhive feeder.
|
Easily mounts to the side of beehive boxes for holding your frames as you inspect your hive.
|
Made of cotton/poly with mesh and drawstring tie at the neck. Use as a protective face covering when working with bees or wanting to keep bugs out of your face while in the yard. Fits all sizes. Collapses nicely for easy storage.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Should be used as your Honey Supers or add to your hive until you are ready to extract honey. Based on the 6-7/8 in 10 Frame Langstroth and made from USA Ponderosa Pine with minimal knots, grade 2 or better, this box works with any Langstroth hive. Handle grips on four sides facilitate easy handling. Frame rest lip included. Recommend assembly shortly after delivery to ensure product quality. Dimension of 16-1/4 x 19-7/8 x 6-7/8 in. Assembly required and assembly instructions enclosed.
|
Protect your hands while working with bees using these heavy-duty goatskin bee gloves. A canvas upper with mesh inserts for venting and goat leather protection for your hands provide the comfort and dexterity you need when handling the various jobs of beekeeping.
|
Protect your hands while working with bees using these heavy-duty goatskin bee gloves. A canvas upper with mesh inserts for venting and goat leather protection for your hands provide the comfort and dexterity you need when handling the various jobs of beekeeping.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Protect your hands while working with bees using these heavy-duty goatskin bee gloves. A canvas upper with mesh inserts for venting and goat leather protection for your hands provide the comfort and dexterity you need when handling the various jobs of beekeeping.
|
Protect your hands while working with bees using these heavy-duty goatskin bee gloves. A canvas upper with mesh inserts for venting and goat leather protection for your hands provide the comfort and dexterity you need when handling the various jobs of beekeeping.
|
Designed to fit 10 Frame Langstroth hives and lasts for up to 20 years. Spacing on the bottom allows for strapping your hive for transport or wind protection. Standard usage is one Bottom Board per hive to be used as a base for your boxes.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Ideal for use as Brood chambers in your hive. Standard use is two brood chambers per hive. Based on the Langstroth 10-frame design with standard 9-1/2 in frames made from USA Ponderosa Pine with minimal knots, grade 2 or better, this box works with any Langstroth hive. Handle grips on four sides facilitate easy handling. Frame rest included. Recommend assembly shortly after delivery to ensure product quality. Dimension of 16-1/4 x 19-7/8 x 9-1/2 in. Assembly required and assembly instructions are enclosed.
|
Harvest Lane Honey Angle/Cold Knife, Specifications: Serrated Blade, 2 in L, 4 in W, 17-1/2 in H, Wood
|
Harvest Lane Honey Bucket, Specifications: 5 gal Capacity, Dimensions: 12 x 12 x 15-1/2 in
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Smoking your hive makes managing the bees inside easier. Use to help soothe the colony, relax your hive and prevent aggressive bees. Includes a heat shield and side hook with leather bellows (sometimes referred to as 4X7). Recommend adding 1 Tablespoon of smoker pellets to the bottom of the smoker for each use.
|
Used to provide ventilation to the hive. The screened bottom board features a sliding solid bottom that allows the beekeeper to control the amount of ventilation without having to disturb the hive. Consists of a 45 deg slanted front landing board with the bottom board and solid constructed sides, along with a heavy-gauge galvanized steel mesh screened center and a solid sliding bottom for long-term use.
|
Constructed of galvanized steel stop a wooden base designed to fit across a standard 10 frame Langstroth hive and includes a drip edge to protect against the weather and pests. Engineered and designed to withstand pressure over 2500 lb. Use one top per hive.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Used to screen particles, wax and other impurities from harvested honey after extraction. Features fully adjustable sides to fit over most buckets and containers.
|
Constructed of galvanized steel stop a wooden base designed to fit across a standard 10 frame Langstroth hive and includes a drip edge to protect against the weather and pests. Engineered and designed to withstand pressure over 2500 lb. One top per hive stated as standard use.
|
Built from Ponderosa Pine and painted with two coats of white exterior latex paint, the box is ready to use as brood chambers in your Standard 6 7/8 in 10 Frame Langstroth hive or as honey supers as your hive builds up. Standard use is to continue to add honey supers until you are ready to extract. Based on the standard 10 Frame Langstroth design with handle grips on four sides for easy handling and frame rest lip included. This product is intended for use with Medium Honey 6 to 14 in frames and 5-5/8 in foundations. The plastic foundation has a beeswax coating. Dimension of 16-1/4 x 19-7/8 x 6-7/8 in. No assembly required. It comes fully assembled. Made in USA.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
The hooded bee jacket is a quick way to use protective clothing to allow you to inspect your hive and collect honey without the sting. Stretch elastic and covered zippers keep you protected and the full mesh hood is structured to keep the mesh and bees comfortably away from your face.
|
The hooded bee jacket is a quick way to use protective clothing to allow you to inspect your hive and collect honey without the sting. Stretch elastic and covered zippers keep you protected and the full mesh hood is structured to keep the mesh and bees comfortably away from your face.
|
The hooded bee jacket is a quick way to use protective clothing to allow you to inspect your hive and collect honey without the sting. Stretch elastic and covered zippers keep you protected and the full mesh hood is structured to keep the mesh and bees comfortably away from your face.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
The hooded bee jacket is a quick way to use protective clothing to allow you to inspect your hive and collect honey without the sting. Stretch elastic and covered zippers keep you protected and the full mesh hood is structured to keep the mesh and bees comfortably away from your face.
|
This kit includes an assembled and painted USA Ponderosa Pine Deep Broad bee box, as well as 10 9-1/2 in assembled and waxed deep honey frames with sturdy plastic foundations. Milled and assembled in the USA, the box is fully painted, then quality inspected to ensure a long-lasting hive. Designed to work with all 10 Frame Langstroth design hives. Recommend 2 deep brood boxes while starting a hive. Dimension of 16-14 x 19-7/8 x 9-1/2 in.
|
Use to raise any standard Langstroth hive off the ground to prevent water damage and hive invasions. One protective hive stand per hive stated as standard.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
The hooded bee suit allows beekeepers to collect honey without the sting. Stretch elastic and covered zippers keep you protected while you reap the rewards of your hive. The full mesh hood is structured to be breathable and keep bees away from your face. Side zippers on the ankles allow you to easily put your suit on over clothing and shoes. Machine wash delicate, air dry.
|
The hooded bee suit allows beekeepers to collect honey without the sting. Stretch elastic and covered zippers keep you protected while you reap the rewards of your hive. The full mesh hood is structured to be breathable and keep bees away from your face. Side zippers on the ankles allow you to easily put your suit on over clothing and shoes. Machine wash delicate, air dry.
|
The hooded bee suit allows beekeepers to collect honey without the sting. Stretch elastic and covered zippers keep you protected while you reap the rewards of your hive. The full mesh hood is structured to be breathable and keep bees away from your face. Side zippers on the ankles allow you to easily put your suit on over clothing and shoes. Machine wash delicate, air dry.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
The hooded bee suit allows beekeepers to collect honey without the sting. Stretch elastic and covered zippers keep you protected while you reap the rewards of your hive. The full mesh hood is structured to be breathable and keep bees away from your face. Side zippers on the ankles allow you to easily put your suit on over clothing and shoes. Machine wash delicate, air dry.
|
The hooded bee suit allows beekeepers to collect honey without the sting. Stretch elastic and covered zippers keep you protected while you reap the rewards of your hive. The full mesh hood is structured to be breathable and keep bees away from your face. Side zippers on the ankles allow you to easily put your suit on over clothing and shoes. Machine wash delicate, air dry.
|
Beekeeping is a safe, fun and rewarding experience that can be a hobby or a way of life. With Harvest Lane Honey's simple all-in-one kit anyone can begin beekeeping the moment the bees arrive. The hive components are 100% painted and assembled and ready to go. Includes outer cover, inner cover, one deep hive body, nine deep frames with plastic foundation, one bottom board, one entrance reducer, one in-hive feeder, one 3 x 6 smoker, 1 lb bag smoker fuel, one 9-1/2 in steel hive tool and one bee brush.
|
|
|
|
|
|
|
|
|
|
|
|
|
Harvest Lane Honey Extractor, 21 in L, 21 in W, 42 in H, Stainless Steel, Includes: Extractor Stand
|
|
|
Headquarters Palm City, Jensen Beach, Stuart