Home > HAND TOOLS > CLAMPS / FASTENING TOOLS > FASTENING > POWER HAMMER PINS
Sort By:
Page of 1
PIN DRIVE SHANK .145IN 3/4IN PIN DRIVE KNURLED.145IN 1/2IN PIN DRIVE SHANK .145IN STD 1IN
Blue Point Fasteners Drive Pin, Head Type: Flat, Head Diameter: 0.3 in, Shank Type: Smooth, Shank Diameter: 0.14 in, Plain, 3/4 in L, Suitable for: BP-307S 0.22 cal Powder-Actuated Tool Blue Point Fasteners Drive Pin with Plastic Washer, Head Diameter: 0.3 in, Shank Diameter: 0.14 in, Knurled, 1/2 in L, Suitable for: BP-307S 0.22 cal Powder-Actuated Tool Blue Point Fasteners Drive Pin, Head Type: Flat, Head Diameter: 0.3 in, Shank Type: Smooth, Shank Diameter: 0.14 in, Plain, 1 in L, Suitable for: BP-307S 0.22 cal Powder-Actuated Tool
PIN DRIVE 3/4IN L 0.3IN HEAD FASTENING PIN GALV 0.3 X 3/4IN PIN DRIVE SHANK .145IN 1-1/2IN
DEWALT Powder Actuated Pin, Head Diameter: 0.3 in, Shank Diameter: 0.145 in, Steel/Plastic, Silver, 3/4 in L, Suitable for: Powers PA3500EX and P3X Powder Actuated tools The PDPA is a hardened-steel, powder-actuated fastener designed to fasten building components to concrete, steel and CMU. The PDPA consists of a fastener with a 0.3 in Dia head and a 0.157 in Dia shank. The PDPA provides maximum jobsite productivity with fast installation. Blue Point Fasteners Drive Pin, Head Diameter: 0.3 in, Shank Type: Smooth, Shank Diameter: 0.14 in, Plain, 1-1/2 in L, Suitable for: BP-307S 0.22 cal Powder-Actuated Tool
PIN DRIVE 0.3IN HEAD 1IN L Ramset 00810 Washered Pin FASTENING PIN GALV 0.3 X 1IN
DEWALT Powder Actuated Pin, Head Diameter: 0.3 in, Shank Diameter: 0.145 in, 1 in L, Suitable for: Powers PA3500EX and P3X Powder Actuated tools With 7/8 in washer to prevent overdrive and to increase holding value when fastening wood or thin metal to concrete or structural steel. Fits all Ramset, hilti, Remington and most powder actuated tools that use 22 cal single shots, 27 cal 10 shot strips and 25 cal discs. Shank diameter of 0.145 in. The PDPA is a hardened-steel, powder-actuated fastener designed to fasten building components to concrete, steel and CMU. The PDPA consists of a fastener with a 0.3 in Dia head and a 0.157 in Dia shank. The PDPA provides maximum jobsite productivity with fast installation.
FASTENING PIN KNRLD GALV 1/2IN PIN DRIVE SHANK .145IN STD 2IN Ramset 1516A Drive Pin
The PDPA is a hardened-steel, powder-actuated fastener designed to fasten building components to concrete, steel and CMU. The PDPA consists of a fastener with a 0.3 in Dia head and a 0.157 in Dia shank. The PDPA provides maximum jobsite productivity with fast installation. Blue Point Fasteners Drive Pin, Head Diameter: 0.3 in, Shank Type: Smooth, Shank Diameter: 0.14 in, Plain, 2 in L, Suitable for: BP-307S 0.22 cal Powder-Actuated Tool Use with Ramset, hilti, Remington and most powder actuated tools that use 22 cal single shots, 27 cal. 10 strips and 25 cal discs. For models of low velocity powder actuated tools with 300 or larger barrel diameter. Knurled shank pins for fastening to structural steel. Diameter of 0.145 in.
PIN DRIVE 0.3IN HEAD 1-1/2IN Ramset 1506 Drive Pin FASTENING PIN GALV 0.3X1-1/4IN
Drive pins with a 0.3 in Dia head are designed for permanently fastening a fixture to concrete, concrete over steel deck, concrete masonry walls and A36 or A572/A992 structural steel. The fasteners are manufactured with a 0.145 in Dia shank in various lengths. Knurled shank designs are available for installations in thick steel base materials. A plastic flute is mounted on the pin shank to retain the drive pin in the barrel of the tool and provide guidance during the driving operation. Ramset Drive Pin, Head Diameter: 0.3 in, Shank Diameter: 0.145 in, Steel, Zinc, 3/4 in L, Suitable for: Remington, Bostitch, Hilti, Redhead, Ramset and Uniset Low Velocity Tools The PDPA is a hardened-steel, powder-actuated fastener designed to fasten building components to concrete, steel and CMU. The PDPA consists of a fastener with a 0.3 in Dia head and a 0.157 in Dia shank. The PDPA provides maximum jobsite productivity with fast installation.
FASTENING PIN GALV 0.3X1-1/2IN PIN DRIVE SHANK .145IN 2-1/2IN Ramset 1508 Drive Pin
The PDPA is a hardened-steel, powder-actuated fastener designed to fasten building components to concrete, steel and CMU. The PDPA consists of a fastener with a 0.3 in Dia head and a 0.157 in Dia shank. The PDPA provides maximum jobsite productivity with fast installation. Blue Point Fasteners Drive Pin, Head Diameter: 0.3 in, Shank Type: Smooth, Shank Diameter: 0.14 in, Plain, 2-1/2 in L, Suitable for: BP-307S 0.22 cal Powder-Actuated Tool Ramset Drive Pin, Head Diameter: 0.3 in, Shank Diameter: 0.145 in, Powder Plated, Suitable for: Powder Actuated Tools
PIN DRIVE SHANK .145IN 3IN PIN DRIVE HEAD 0.3X2-1/4IN Ramset 06171/1503K Knurled Drive Pin
Blue Point Fasteners Drive Pin, Head Type: Flat, Head Diameter: 0.3 in, Shank Type: Smooth, Shank Diameter: 0.14 in, Plain, 3 in L, Suitable for: BP-307S 0.22 cal Powder-Actuated Tool Drive pins with a 0.3 in Dia head are designed for permanently fastening a fixture to concrete, concrete over steel deck, concrete masonry walls and A36 or A572/A992 structural steel. The fasteners are manufactured with a 0.145 in Dia shank in various lengths. Knurled shank designs are available for installations in thick steel base materials. A plastic flute is mounted on the pin shank to retain the drive pin in the barrel of the tool and provide guidance during the driving operation. Use with Ramset, hilti, Remington and most powder actuated tools that use 22 cal single shots, 27 cal. 10 strips and 25 cal discs. For models of low velocity powder actuated tools with 300 or larger barrel diameter. Knurled shank pins for fastening to structural steel. Diameter of 0.145 in.
FASTENING PIN GALV 0.3 X 2IN PIN DRIVE WASHER .145IN 1IN PIN DRIVE WASHER.145IN 1-1/4IN
The PDPA is a hardened-steel, powder-actuated fastener designed to fasten building components to concrete, steel and CMU. The PDPA consists of a fastener with a 0.3 in Dia head and a 0.157 in Dia shank. The PDPA provides maximum jobsite productivity with fast installation. Blue Point Fasteners Drive Pin with Metal Round Washer, Head Diameter: 0.3 in, Shank Diameter: 0.14 in, 1 in L, Suitable for: BP-307S 0.22 cal Powder-Actuated Tool Blue Point Fasteners Drive Pin with Metal Round Washer, Head Diameter: 0.3 in, Shank Diameter: 0.14 in, 1-1/4 in L, Suitable for: BP-307S 0.22 cal Powder-Actuated Tool
PIN DRIVE HD W/WSHR 0.3X2.5IN PIN DRIVE HEAD W/WSHR 0.3X3IN Ramset 1512 Drive Pin
Drive pins with a 0.3 in Dia head are designed for permanently fastening a fixture to concrete, concrete over steel deck, concrete masonry walls and A36 or A572/A992 structural steel. The fasteners are manufactured with a 0.145 in Dia shank in various lengths. Knurled shank designs are available for installations in thick steel base materials. A plastic flute is mounted on the pin shank to retain the drive pin in the barrel of the tool and provide guidance during the driving operation. Drive pins with a 0.3 in Dia head are designed for permanently fastening a fixture to concrete, concrete over steel deck, concrete masonry walls and A36 or A572/A992 structural steel. The fasteners are manufactured with a 0.145 in Dia shank in various lengths. Knurled shank designs are available for installations in thick steel base materials. A plastic flute is mounted on the pin shank to retain the drive pin in the barrel of the tool and provide guidance during the driving operation. Use with Ramset, hilti, Remington and most powder actuated tools that use 22 cal single shots, 27 cal. 10 strips and 25 cal discs. For models of low velocity powder actuated tools with 300 or larger barrel diameter. Knurled shank pins for fastening to structural steel. Diameter of 0.145 in.
PIN DRIVE WASHER.145IN 1-1/2IN FASTENING PIN GALV 0.3X2-1/2IN PIN DRIVE WASHER.145IN 2-1/2IN
Blue Point Fasteners Drive Pin with Metal Round Washer, Head Diameter: 0.3 in, Shank Diameter: 0.14 in, 1-1/2 in L, Suitable for: BP-307S 0.22 cal Powder-Actuated Tool The PDPA is a hardened-steel, powder-actuated fastener designed to fasten building components to concrete, steel and CMU. The PDPA consists of a fastener with a 0.3 in Dia head and a 0.157 in Dia shank. The PDPA provides maximum jobsite productivity with fast installation. Blue Point Fasteners Drive Pin with Metal Round Washer, Head Diameter: 0.3 in, Shank Diameter: 0.14 in, 2-1/2 in L, Suitable for: BP-307S 0.22 cal Powder-Actuated Tool
PIN DRIVE WASHER .145IN 2IN PIN DRIVE WASHER .145IN 3IN FASTENING PIN GALV 0.3X2-7/8IN
Blue Point Fasteners Drive Pin with Metal Round Washer, Head Diameter: 0.3 in, Shank Diameter: 0.14 in, 2 in L, Suitable for: BP-307S 0.22 cal Powder-Actuated Tool Blue Point Fasteners Drive Pin with Metal Round Washer, Head Diameter: 0.3 in, Shank Diameter: 0.14 in, 3 in L, Suitable for: BP-307S 0.22 cal Powder-Actuated Tool The PDPA is a hardened-steel, powder-actuated fastener designed to fasten building components to concrete, steel and CMU. The PDPA consists of a fastener with a 0.3 in Dia head and a 0.157 in Dia shank. The PDPA provides maximum jobsite productivity with fast installation.
Ramset 1516E Ramguard Pin Ramset 1514 Drive Pin FASTENING PIN ZN GALV 1-1/2IN
Coated to improve corrosion resistance in treated lumber and other applications. Fits most powder actuated tools that use 22 cal. Features single shots of 27 cal. Shank diameter of 0.145 in. Ramset Drive Pin, Head Diameter: 0.3 in, Shank Diameter: 0.145 in, Plated The PDPAWL is a powder-actuated washered pin designed to fasten building components to concrete, steel and CMU. The PDPAWL consists of a hardened-steel PDPA pin preassembled with a 1? washer that provides additional bearing surface for enhanced upload resistance. The PDPAWL is designed for use with Simpson Strong-Tie? powder-actuated tool systems as well as other common tools.
FASTENING PIN ZINC GALV 1IN Ramset 1508SD Washered Pin FASTNING PIN GALV CL65 2-1/2IN
The PDPAWL is a powder-actuated washered pin designed to fasten building components to concrete, steel and CMU. The PDPAWL consists of a hardened-steel PDPA pin preassembled with a 1? washer that provides additional bearing surface for enhanced upload resistance. The PDPAWL is designed for use with Simpson Strong-Tie? powder-actuated tool systems as well as other common tools. With 7/8 in washer to prevent overdrive and to increase holding value when fastening wood or thin metal to concrete or structural steel. Fits all Ramset, hilti, Remington and most powder actuated tools that use 22 cal single shots, 27 cal 10 shot strips and 25 cal discs. Shank diameter of 0.145 in. The PDPA is a hardened-steel, powder-actuated fastener designed to fasten building components to concrete, steel and CMU. The PDPA consists of a fastener with a 0.3 in Dia head and a 0.157 in Dia shank. The PDPA provides maximum jobsite productivity with fast installation.
Ramset 1516 Drive Pin FASTENING PIN ZINC GALV 2IN 1-1/4IN WASHERED PIN
Use with Ramset, hilti, Remington and most powder actuated tools that use 22 cal single shots, 27 cal. 10 strips and 25 cal discs. For models of low velocity powder actuated tools with 300 or larger barrel diameter. Knurled shank pins for fastening to structural steel. Diameter of 0.145 in. The PDPAWL is a powder-actuated washered pin designed to fasten building components to concrete, steel and CMU. The PDPAWL consists of a hardened-steel PDPA pin preassembled with a 1? washer that provides additional bearing surface for enhanced upload resistance. The PDPAWL is designed for use with Simpson Strong-Tie? powder-actuated tool systems as well as other common tools. With 7/8 in washer to prevent overdrive and to increase holding value when fastening wood or thin metal to concrete or structural steel. Fits all Ramset, hilti, Remington and most powder actuated tools that use 22 cal single shots, 27 cal 10 shot strips and 25 cal discs. Shank diameter of 0.145 in.
FASTENING PIN ZN GALV 2-1/2IN FASTENING PIN ZN GALV 2-7/8IN FASTENING PIN GALV CLASS65 3IN
The PDPAWL is a powder-actuated washered pin designed to fasten building components to concrete, steel and CMU. The PDPAWL consists of a hardened-steel PDPA pin preassembled with a 1? washer that provides additional bearing surface for enhanced upload resistance. The PDPAWL is designed for use with Simpson Strong-Tie? powder-actuated tool systems as well as other common tools. The PDPAWL is a powder-actuated washered pin designed to fasten building components to concrete, steel and CMU. The PDPAWL consists of a hardened-steel PDPA pin preassembled with a 1? washer that provides additional bearing surface for enhanced upload resistance. The PDPAWL is designed for use with Simpson Strong-Tie? powder-actuated tool systems as well as other common tools. The PDPA is a hardened-steel, powder-actuated fastener designed to fasten building components to concrete, steel and CMU. The PDPA consists of a fastener with a 0.3 in Dia head and a 0.157 in Dia shank. The PDPA provides maximum jobsite productivity with fast installation.
Ramset 1524 Drive Pin 2IN WASHERED PIN Ramset 1516SDC Washered Pin
Ramset Drive Pin, 0.3 in Diameter Head, 0.145 in Shank Diameter, Plated, 3 in Length Ramset Drive Pin, Head Diameter: 0.3 in, Steel With 7/8 in washer to prevent overdrive and to increase holding value when fastening wood or thin metal to concrete or structural steel. Fits all Ramset, Hilti, Remington and most powder actuated tools that use 22 cal single shots, 27 cal 10 shot strips and 25 cal discs. Shank diameter of 0.145 in.
Ramset 1524SDP Washered Pin FASTNING PIN MECH GALV 2-1/2IN FASTNING PIN MECH GALV 2-7/8IN
Ramset Drive Pin, 0.3 in Diameter Head, 3 in Length The PDPAWL is a powder-actuated washered pin designed to fasten building components to concrete, steel and CMU. The PDPAWL consists of a hardened-steel PDPA pin preassembled with a 1? washer that provides additional bearing surface for enhanced upload resistance. The PDPAWL is designed for use with Simpson Strong-Tie? powder-actuated tool systems as well as other common tools. The PDPAWL is a powder-actuated washered pin designed to fasten building components to concrete, steel and CMU. The PDPAWL consists of a hardened-steel PDPA pin preassembled with a 1 in washer that provides additional bearing surface for enhanced upload resistance. The PDPAWL is designed for use with Simpson Strong-Tie? powder-actuated tool systems as well as other common tools.
PIN DRIVE HD W/WSHR 0.3X2-1/2 PIN DRIVE HEAD W/WSHR 0.3X3IN
Drive pins with a 0.3 in Dia head are designed for permanently fastening a fixture to concrete, concrete over steel deck, concrete masonry walls and A36 or A572/A992 structural steel. The fasteners are manufactured with a 0.145 in Dia shank in various lengths. Knurled shank designs are available for installations in thick steel base materials. A plastic flute is mounted on the pin shank to retain the drive pin in the barrel of the tool and provide guidance during the driving operation. The fasteners are also available in with a mechanically galvanized (MG) coating for use in treated lumber. Drive pins with a 0.3 in Dia head are designed for permanently fastening a fixture to concrete, concrete over steel deck, concrete masonry walls and A36 or A572/A992 structural steel. The fasteners are manufactured with a 0.145 in Dia shank in various lengths. Knurled shank designs are available for installations in thick steel base materials. A plastic flute is mounted on the pin shank to retain the drive pin in the barrel of the tool and provide guidance during the driving operation. The fasteners are also available in with a mechanically galvanized (MG) coating for use in treated lumber.