Home > POWER TOOLS & ACC > AIR COMPRESSORS, TOOLS & ACCES > COMPRESSORS & ACCESSORIES > AIR COMPRESSORS
Sort By:
Page of 1
Senco PC1010 Air Compressor Porter-Cable C2002 Air Compressor Stanley-Bostitch BTFP02011 Air Compressors
The PC1010 is ultra-quiet and ultra-light lube less pump compressor. Our 150 psi 6 gal oil-free pancake compressor is constructed with a pancake style tank for stability, with a water drain valve and tough rubber feet. The high-pressure design optimizes air tool performance, delivering 2.6 scfm at 90 psi for quick recovery time. The oil-free pump provides maintenance-free performance. Transporting is easy with the integrated cord wrap. This portable, lightweight pancake compressor has a an oil-free, maintenance-free pump that delivers 2.6 scfm at 90 psi and a maximum tank storage pressure of 150 psi. The 78.5 dBA rating is ideal for a quiet work environment.
COMPRESSOR QUITE 135PSI 1 GAL Senco PC1010N  Air Compressors COMPRESSOR AIR PANCAKE HIC 6GA
DEWALT Portable Electric Air Compressor, Tool Only/Battery Included: Tool Only, 120 V, 0.33 hp, 2.6 A, Frequency Rating: 60 Hz, Number of Stages: 1, Outlet Connection Size: 1/4 in, Tank Type: Hot Dog, Tank Capacity: 1 gal, 135 psi, Air Flow Rate: 1 cfm, 3100 rpm, Sound Level: 71 dBA, Motor Type: Induction, Pump Type: Oil-Free, Drive Type: Belt, Steel, Dimensions: 18.5 in L x 14.89 W x 11.75 in H, Includes: (1) Factory Installed Coupler, (2) Gauges Senco's 1 gal finish and trim air compressor is designed with the professional contractor in mind. The lightweight and compact design ensure easy portability combined with the ultra-quiet operation makes this the ideal finish and D6 trim unit. The long life induction motor and oil-free pump design eliminate the need for oil or regular maintenance. Metabo HPT is reinventing the jobsite compressor with The Tank?. With class leading psi and weighing only 41 lb, this lightweight compressor packs more pressure into a smaller body. It is engineered with the power to run a framing, roofing or siding crew and is versatile enough to run a team of five 18 ga nailers at a time. The Tank offers serious pros a next level compressor, which provides the most demanding framer no downtime while driving nails flush. The Tank? has the capacity and psi to simultaneously run two framing nailers or two siding nailers or two roofing nailers at the same rate of production as a traditional jobsite compressor. Finish crews can even run three 15 or 16 ga finish nailers or five 18 ga brad nailers. At 200 psi and 4 cfm at 90 psi, you can get more work done with less weight. The Tank? rolls through the toughest jobsites with the power and performance to get the job done!.
COMPRESOR PANCAKE 165 PSI 6GAL COMPRESSOR AIR ELEC 1/2HP 1GAL COMPRESSOR .75HP 125PSI HOTDOG
The heavy-duty 6 gal, 165 max psi, compressor is ideal for supporting a variety of pneumatic and air tool applications. The oil-free pump delivers 2.6 scfm at 90 psi for long tool runtime and quick recovery. The included cord wrap provides convenience and easy storage on the jobsite or in the garage. Compressors are workhorse tools on the jobsite and in the work shop. Makita? air compressors are favorites for their faster recovery time, lower noise, longer tool life and consistent performance. The Makita? 1/2 hp 1 gal compact, oil-free, electric air compressor (MAC100Q) features a QUIET series design, combining strong performance with lower noise. At only 58 dBA, it's ideal for indoor use during case and base installation, trim and finish carpentry, cabinet or furniture making, and more. The MAC100Q runs at a lower rpm, resulting in longer motor and pump life. It is powered by an efficient 1/2 hp induction motor that provides up to 135 psi. It also features a lightweight design (only 25.5 lb) for increased portability. The roll-cage construction provides added protection for the pump and motor assembly during transportation, in storage and on the jobsite. Additional features include a low-amp draw that reduces the incidents of tripped breakers at start-up, as well as an oil-free dual-piston pump designed for maintenance-free operation. 1 cfm at 100 psi. Maximum pressure of 125 psi. Power rating of 0.75 Peak hp. 1 gal air tank capacity. Dimension of 14.1 in L x 13.77 in W x 12.6 in H. Weighs 24.7 lb.
Makita MAC700 Air Compressor Hitachi EC12 Portable Air Compressor Senco PC1280  Air Compressors
Makita's 2 hp air compressor (MAC700) is equipped with Makita's Big Bore? engineered pump cylinder and piston for higher output, less noise and improved jobsite performance. The MAC700 delivers industrial power and results with improved durability for tough jobsite conditions. The MAC700 is powered by a 2 hp motor. The Makita Big Bore? engineered pump with cast iron cylinder has greater bore and stroke for increased compression, faster recovery and less noise. The cast iron construction is engineered for increased durability even under tough jobsite conditions. The MAC700 has an oil-lubricated pump and is equipped with a large automotive style filter for increased air intake and greater efficiency. The Big Bore? oil-lubricated pump is also more efficient: the MAC700 runs cooler and at half the rpm of most competitive units, resulting in greater motor and pump life and lower noise. The 2.6 gal tank sustains an operating pressure of 130 psi and delivers 40 psi (3.8 cfm) and 90 psi (3.3 cfm). The low-amp draw reduces instances of tripped breakers and voltage drop that can cause premature motor failure. The roll bar handle provides portability and additional protection, helping it withstand harsh jobsite environments. Additional features include a convenient oil drain and oil sight glass, a tank drain valve that supersedes standard petcock design for easier maintenance and finned discharge tubing that dissipates heat more efficiently. The MAC700 is engineered for low noise, high output and less maintenance, and delivers industrial power and results with improved durability under tough jobsite conditions. The EC99S twin stack compressor features an oil-lubricated cast iron pump and 15 A direct drive induction motor for longer life. The motor is protected by a thermal overload protection that stops the motor in a possible overheating situation. Weighing just 52.9 lb, the EC99S has an ergonomic carrying handle to make it easier to transport to any jobsite. A universal quick coupler and steel encased industrial gauges are factory installed on the unit so it is ready to go out of the box. Senco's 6 gal pancake air compressor is designed with the power and speed to handle all finish and trim applications. The compact, lightweight and balanced design allows for easy portability. The oil-free pump allows for maintenance-free operation.
Senco PC0968 Air Compressor COMPRESSOR HD 200 PSI 2-1/2GAL COMPRESSOR AIR 1HP 1.5GAL
Designed with the power and speed to handle all finish and trim applications. The PC0968 comes with an oil-less pump and weighing in at only 38 lb this compressor will not wear you down. This 2.5 gal, 200 max psi, compressor is ideal for supporting a variety of pneumatic and air tool applications. The oil-free pump delivers 3 scfm at 90 psi for long tool runtime and quick recovery. The compressor can be operated/stored in either the vertical/horizontal position for quick and easy space-saving around a garage or jobsite. Iron Horse Air Compressor, 1 hp, Tank Capacity: 1 gal
COMPRESSOR HANDCARRY 100PSI 4G Senco PC1131 Air Compressor COMPRESSOR CMPCT M18 FUEL 2GAL
DEWALT Electric Hand Carry Air Compressor, Tool Only/Battery Included: Tool Only, 120 VAC, 1.1 hp, 15 A, Frequency Rating: 60 Hz, Number of Phases: 1, Number of Stages: 1, Tank Type: Twin Stack, Tank Capacity: 4 gal, 125 psi, Air Flow Rate: 4 cfm, 3400 rpm, Sound Level: 78.5 dB, Motor Type: Induction, Pump Type: Oil-Lubricated, Drive Type: Direct, steel, Dimensions: 18 in L x 18-1/2 in W x 16-3/4 in H, Includes: DeWALT Compressor Oil Senco's PC1131 workhorse compressor generates 4.4 cfm which provides power for all types of applications, from finish to framing. The oil splash design and induction motor provides the durability expected for professional contractors. Our M18 FUEL? 2 gal compact quiet compressor is designed for the professional carpenter and remodeler. This quiet air compressor is only 68 dBA, making it the quietest cordless compressor on the market and quieter than most corded options. We've designed this 2 gal air compressor to be high performing while reducing the noise professionals deal with on jobsites. Its low-profile and stackable design allow our portable air compressor to be easily stored and transported on, around and back off the jobsite. It has run time professionals need to stay productive, giving you up to 1600 18 ga brad nails per charge. It is compatible with all Milwaukee? M18? REDLITHIUM? batteries making it easy to swap packs and keep running to finish your job.
COMPRESSOR AIR ELE1-1/2HP 3GAL COMPRESSOR AIR 2.5 HP         COMPRESSOR WHEEL 200PSI 4-1/2G
Compressors are workhorse tools on the jobsite and in the work shop. Makita? air compressors are favorites for their faster recovery time, lower noise, longer tool life and consistent performance. The Makita? QUIET series 1-1/2 hp, 3 gal, oil-free, electric air compressor (MAC320Q) features a QUIET series design, combining strong performance with lower noise. At only 60 dBA, it's ideal for indoor use during case and base installation, trim and finish carpentry, cabinet or furniture making, and more. The MAC320Q runs at a lower rpm, resulting in longer motor and pump life. It is powered by an efficient 1-1/2 hp induction motor that provides up to 90 psi. It also features a lightweight design (only 52.5 lb) for increased portability. The roll-cage construction provides added protection for the pump and motor assembly during transportation, in storage, and on the jobsite. Additional features include a low-amp draw that reduces the incidents of tripped breakers at start-up, an oil-free dual-piston pump designed for maintenance-free operation, and hooks for convenient AC power cord storage. Makita's 2.5 hp air compressor is equipped with Makita's Big Bore? engineered pump cylinder and piston for higher output for two nailers, with less noise and improved jobsite performance. The MAC2400 delivers industrial power and results with improved durability for tough jobsite conditions. The MAC2400 is powered by a 2.5 hp motor. The Makita Big Bore? engineered pump with cast iron cylinder has greater bore and stroke for increased compression, faster recovery and less noise. The cast iron construction is engineered for increased durability even under tough jobsite conditions. The MAC2400 has an oil-lubricated pump and is equipped with a large automotive style filter for increased air intake and greater efficiency. The Big Bore? oil-lubricated pump is also more efficient and the MAC2400 runs cooler and at half the rpm of most competitive units, resulting in greater motor and pump life and lower noise. The 4.2 gal twin-stacked tank sustains an operating pressure of 130 psi and delivers 40 psi (4.8 cfm) and 90 psi (4.2 cfm), enough for two nailers. The low-amp draw reduces instances of tripped breakers and voltage drop that can cause premature motor failure. The roll bar handle provides portability and additional protection, helping it withstand harsh jobsite environments. Additional features include a convenient oil drain and oil sight glass, a tank drain valve that supersedes standard petcock design for easier maintenance and finned discharge tubing that dissipates heat more efficiently. The MAC2400 is engineered for low noise, high output and less maintenance and delivers industrial power and results with improved durability under tough jobsite conditions. DEWALT Portable Electric Air Compressor, Tool Only/Battery Included: Tool Only, 120 V, 1.6 hp, 15 A, Frequency Rating: 60 Hz, Number of Stages: 1, Outlet Connection Size: 1/4 in, Tank Type: Hot Dog, Tank Capacity: 4.5 gal, 225 psi, Air Flow Rate: 6.5 cfm, 1750 rpm, Sound Level: 78 dBA, Pump Type: Oil-Free, Drive Type: Belt, Steel, Wheel Type: Pneumatic, Dimensions: 33 in L x 23 in W x 15-1/2 in H
COMPRESSSOR AIR TROLLEY 8GA   Ingersoll-Rand P1IU-A9 Air Compressor COMPRESSOR AIR 3.0 HP
The TANK? 8 gal trolley air compressor (EC1315S) has a top of its class psi and weighs only 93 lb. This compressor packs high-pressure into an easily portable package. It is engineered with the power to run a framing, roofing, or siding crew and is versatile enough to run a team of finish nailers simultaneously. The TANK? 8 gal offers serious pros a next level compressor, which provides the most demanding framer no downtime while driving nails flush. The TANK? 8 gal has the capacity and psi to simultaneously run (3) framing nailers or (4) siding nailers or (4) roofing nailers at the same rate of production as a traditional jobsite compressor. Finish crews can even run (5) 15 ga or 16 ga finish nailers. At 225 psi and 5 cfm at 90 psi, you can get more work done with less weight. The TANK? 8 gal rolls through the toughest jobsites with the power and performance to get the job done. The Ingersoll Rand oil-lubricated twin-stack reciprocating air compressor is designed to provide power, durability and portability on the jobsite or for DIY projects. From interior trim and finish to roofing and decking, the twin-stack can do the job. Built to last, the compressor features a durable cast-iron cylinder designed for the toughest 100% continuous-duty applications. The twin-stack compressor package comes standard with two 1/4 in universal couplers, front panel-mounted regulator and pressure gauge, 4 gal twin tanks, all season select lubricant and a power cord. Makita's 3 hp air compressor is equipped with Makita's Big Bore? engineered pump cylinder and piston for higher output for two nailers, with less noise and improved jobsite performance. The MAC5200 delivers industrial power and results with improved durability and includes rugged wheels and folding handle for easy transport. The MAC5200 is powered by a 3 hp motor with built-in thermal overload for additional protection. The Makita Big Bore? engineered pump with cast iron cylinder has greater bore and stroke for increased compression, faster recovery and less noise. The cast iron construction is engineered for increased durability even under tough jobsite conditions. The MAC5200 has an oil-lubricated pump and is equipped with a large automotive style filter for increased air intake and greater efficiency. The 5.2 gal tank sustains an operating pressure of 140 psi and delivers 40 psi (6.9 cfm) and 90 psi (6.5 cfm), enough for two nailers. The oil-lubricated pump runs cooler and the finned discharge tubing dissipates heat more efficiently. The roll-cage construction is built for extra protection for the pump and motor assembly, helping it withstand harsh jobsite environments. Ease-of-use and convenience features include tool hangers, a built-in storage compartment for air fittings and accessories and an air hose wrap to store 50 ft of 3/8 in air hose with handle folded or upright. Other features include a convenient oil drain and oil sight glass and a tank drain valve that supersedes standard petcock design for easier maintenance.
COMPRESSOR WORKSHOP 200PSI 15G COMPRESSOR 1.5HP 125PSI STACK COMPRESSOR 2HP 125PSI S-STACK
5.0 SCFM at 90 psi allows for quick compressor recovery times. 200 psi max tank storage pressure allows for longer air tool run times. 78 dBA (tested per ISO3744) operational noise level for a quieter work environment. EHP efficient high pressure technology delivers exceptional air-tool run times. Oil free, maintenance free pump for convenient use. Efficient high pressure motor allows the compressor to be run with an extension cord (12 ga. or heavier, 50 ft or less) due to consistent amp draw requirements of the compressor. Compact design allows for the compressor to be easily moved, transported and stored. Robust dual purpose handle provides additional protection to the compressor along with serving as a hose wrap. Metal console panel protects the gauge, coupler and regulator. High flow air regulator and high flow coupler allows for maximum air tool run time. 2 inch gauges allow for an easy to read surface. Wide track, semi-pneumatic tires allow for additional stability, easy movement and no tire maintenance. 1,750 rpm pump speed. 120 volts power supply. "2.5 CFM at 90 psi. 1.5 (Peak) horsepower. 125 psi max. 47 dB @25 ft. 4 gallon air tank capacity. Dimensions: 16.93""L x 16.54""W x 16.54""H. Weighs 68.5 lbs." "5.0 CFM at 90 psi. 125 max psi. 2.0 (Peak) horsepower. 49 dB @25 ft. 5 gallon air tank capacity. Dimensions: 28.35""L x 20.08""W x 20.08""H. Weighs 86.3 lbs."
Ingersoll-Rand P1.5IU-A9 Air Compressor Hitachi EC2510E Air Compressor Ingersoll-Rand SS3J5.5GH-WB Air Compressor
Designed for professionals and serious do-it-yourselfers, the versatile garage mate is ideal for the home, shop or jobsite. Delivering maximum air, the garage mate can power impact guns, ratchets, grinders, drills, nailers, paint sprayers, sanders and more. The garage mate features a cast-iron, oil-lubricated pump for solid, reliable performance. Belt-driven for quiet operation (75 to 80 dBA), all models are equipped with a pressure switch, pressure gauge, regulator, safety valve, manual drain and 6 ft power cord. The EC2510E 8 gal gas-powered wheeled air compressor combines contractor-grade quality with simplified operation. Designed to work day-in and day-out, this compressor provides plenty of air and cycles from 116 psi to a maximum of 145 psi so it turns on well before tools requirements are compromised. Ingersoll Rand gas engine wheelbarrow air compressors are lightweight with a low-profile design providing maximum maneuverability on the jobsite. Built to last, these cast-iron, oil-lube compressors are designed for the toughest 100% continuous duty applications. The wheelbarrow compressor package includes pressure switch, regulator and gauge, two quick disconnects to power multiple tools and twin 8 gal capacity tanks. These gas-driven models are powered by an easy-starting 5.5 hp Honda or Kohler high-performance engine.
IronHorse IHD6160V1 Air Compressor Woods/Iron Horse IHD7180V1 Iron Horse Air Compressors
Iron Horse Air Compressor, Tool Only/Battery Included: Tool Only, 208/230 V, 6.5 hp, Tank Capacity: 60 gal, 150 psi, Air Flow Rate: 11.2 cfm, Iron, Dimensions: 27 in L x 20 in W x 65 in H Features a 3-piston "V" style cast iron pump for longer life. Produces 16.5 cfm at 90 psi with a max pressure of 150 psi. No magnetic starter required. Oil sight glass. Enclosed belt guard. Heavy-duty pressure switch. ASME certified tank that meets the national pressure vessel certifications.