Home > PLUMBING > ROUGH PLUMBING SUPPLIES > PUMPS (NON-WELL)
Choose a sub category:
SUMP PUMPS - SUBMERSIBLE SUMP PUMPS - PEDESTAL SUMP PUMPS - BACK UP
PUMP SWITCHES & FLOATS SUMP PUMP WELLS / BASINS UTILITY PUMPS - SUBMERSIBLE
UTILIY PUMPS - ELEC SPRINKLER PUMPS TRANSFER PUMPS - ELECTRIC
TRANSFER PUMPS - 12V TRANSFER PUMPS - GAS TRASH PUMPS
UNDER SINK PUMPS SEWAGE PUMPS MISC NON-WELL PUMPS
DISCHARGE & SUCTION HOSES SUMP PUMP CHECK VALVES DRILL & HAND PUMPS
Sort By:
Page of 2
Sump Check Valve PUMP DRILL 3/4IN GHT          Sta-Rite FP0026-6D-P2 Sump Pump Check Valve
Durable sonic welded thermo-plastic body. Works with most drills. Easy to install, thermoplastic construction, corrosion-resistant steel shaft. Connects to garden hose, 3/4 in suction and discharge, maximum drill speed 1200 rpm, recommended drill chuck size 3/8 in or larger. Drill and garden hose sold separately. Double-threaded for use with 1-1/4 in or 1-1/2 in sump pump discharges, Discharge side designed to allow discharge hose to clamp directly in place, built-in anti-airlock hole.
PEDESTAL SWITCH REPLACEMENT   HOSE KIT SUMP PUMP UNIVERSAL  Sta-Rite FPDMP21SA Parts2O
Universal design replaces most external pedestal pump float switches. Durable metal switch arm. Includes wire leads and mounting hardware. 120V, 15 amp. Work with all pumps with a discharge size of 1-1/4 in or 1-1/2 in. For permanent or temporary use. 24 ft poly drainage tubing. Includes 1-1/4 in and 1-1/2 in adapters with rust-resistant hose clamps. Thermoplastic drill pump works with electric drills. Ideal to pump water or change oil with your electric drill as a power source.
Sta-Rite FP0012-6U-P2 Pump Discharge Hose Kit American Granby SPDK15OMHD Discharge Hose Kit Wayne 66005-WYN Check Valve
For use with pedestal and submersible sump pumps. 24 ft x 1-1/4 in flexible drain tubing, 1-1/4 in and 1-1/2 in high-impact NPT barbed adapters, hose clamp included. Heavy-duty flexible hose for suction or discharge. For permanent or temporary use. Includes 1-1/2 in corrugated hose, 1-1/2 in male adapter and stainless steel hose clamp. 24 ft length. 1-1/2 in pump thread with 1-1/4 in or 1-1/2 in pipe connection.
Plumb Pak PP855-50 Drill Powered Pump Wayne 57028-001 Check Valve Kit With Rubber Boot and Metal Collars Sta-Rite Industries FP0026-10 Flotec
Attaches to electric drill. Standard hose threads. Includes 2 convertible fittings and 4 hose clamps. Durable thermoplastic valve body and poppet designed to resist corrosion and to stop noise. Handles either 1-1/4 in or 1-1/2 in OD pipe. Prevents water backflow into sump basin. Accept 1-1/4 in or 1-1/2 in discharge lines. Corrosion-resistant construction. Non-threaded, in-line check valve with rubber sleeve and hose clamps.
Hancor 1537ADH Sump Pump Well Lid Superior Pump 92000 Replacement Tethered Float Switch Wayne 56395 Pump Switch Kit
High-density polyethylene constructed. Meets ASTM D3350. CSA approved. Non-mercury tethered float switch, 10 ft cord with piggyback plug, flexible wire construction. Run current of 13 A. Start current of 90 A. Liquid temperature of 140 deg F. For SSF33, SSF50, CDU790 and CDU800 models.
Gt Water WP-25 Pump-A-Lot Sta-Rite FP212-257 Flotec Sewage Check Valves PUMP UTIL W/FLEX HOSE 36X72IN
Includes one water pump model WP10, with 12 ft, 1-1/4 in discharge hose. Powered by water, uses no electricity. There are no moving parts and no motors to burn out. Power is regulated by hose bib which pumps to within 1/8 in of surface. Non-corrosive and uses 1-1/4 or 1-1/2 in discharge hose. Pumps approximately 800 gal of water per hour. Safe and easy to use. Boxed. Economy check valve with stainless steel hose clamp fittings. King Innovation Utility Pump, Discharge Tube Length: 72 in, Dimensions: 36 in L, Includes: (6) Utility Pumps
Hancor 1524ADH Sump Pump Well Superior Pump 92010 Replacement Vertical Float Switch PUMP HAND MANUAL MULTI PURPOSE
SUMP PUMP WELL 18X24
Our Price: $51.19
"High density polyethylene construction. Includes three pre-formed inlet collars sized to fit 4"" corrugated polyethylene drainage lines. Molded side panel is designed lines. Molded side panel is designed to accept outside basement perimeter line at any elevation along well wall. Meets ASTM D3350. 18"" Dia. x 24"" Length. CSA approved. Lid not included." 10 ft power cord, flexible wire construction, pump bracket sold separately. Run current of 13 A. Start current of 90 A. Liquid temperature of 140 deg F. Superior Pump Multi-Purpose Hand Pump, Outlet Connection Size: 1-1/2 in, 18, 36 in OAL, Thermoplastic
Sta-Rite FP18-15BD-P2 Tethered Float Switch PUMP CONDENSATE 115V          Superior Pump 91250 Continuous Duty Submersible Utility Pump
Replaces most standard float switches. Ideal for 14 in Dia or larger sump basins. Piggy-back style plug with 10 ft cord. Mounting strap included. Designed for automatic collection and removal of condensate from air conditioning, refrigeration and dehumidification equipment when gravity drainage is not possible or practical. Also, suitable for high efficiency oil and gas-fired condensing furnace and condensing boiler equipment. 1/4 hp split capacitor motor, high efficiency, low amp draw, 10 ft grounded waterproof power cord, pumps up to 30 gpm, 1800 gph, side and bottom intake provides for clog-resistant suction, cooler operating 115 V motor provides continuous duty, pump will lift water over 25 ft. vertical height, 1-1/4 in male iron pipe discharge thread, standard hose adapter included. 1 year warranty from Superior Pump Co.
Franklin Electric RL-MP16 Submersible Utility Pumps Wayne VIP15 Submersible Utility Pumps Sta-Rite FP0S1250X-08 Flotec
Manual, submersible pump. Ideal for dewatering applications. Reinforced thermoplastic construction will not rust or corrode. Screened bottom intake design removes water to within 3/16 in of surface. Rated at 1300 gph. 1/3 hp reinforced thermoplastic submersible multi-use pump. Good, dependable performance marks this product as the solution for many home de-watering applications.
Sta-Rite FPOS1300X Flotec PUMP SUBMERSIBLE UTIL 1/3HP   Wayne RUP Portable Submersible Sump Pump
The Tempest? is a multi-purpose pump for a variety of household dewatering tasks including sump draining, emptying ponds and aquariums. Continuous duty, thermally protected split capacitor motor. Pumps will lift water up to 25 ft of vertical height. Tough thermoplastic construction, Large 1-1/4 in top discharge for high capacity pumping. Garden hose adapter included. Can be used as a sump pump by adding an optional float switch. 4.1 A, handles 1/8 in solids. Pumps up to 40 gpm/2400 gph. 1 year warranty from Superior Pump. This portable, submersible utility pump is designed for non-automatic use in water. The units are equipped with a 9 ft. 3-prong grounding type power cord. The discharge fitting is designed for convenient attachment to a garden hose, in a temporary application.
Superior Pump 92330 Sump Pumps Superior Pump 92333 Pedestal Sump Pumps Sta-Rite 2305 Simer
1/3 hp split capacitor motor, high efficiency low Amp draw, 10 ft grounded waterproof cord, pumps up to 40 gpm, 2400 gph, side and bottom intake provides for clog-resistant suction, tethered float switch with piggy back plug included, cooler operating 115 V motor provides continuous duty, pump will lift water over 25 ft. vertical height, 1-1/4 in male iron pipe discharge thread, 1-1/4 in female pipe adapter and 1-1/2 in male iron pipe adapter included. 1 year warranty from Superior Pump Co. For use in sump basins 12 in or larger. Thermoplastic base, fully adjustable automatic switch, steel drive shaft, metal switch arm, 1-1/4 in discharge. Current rating of 2.76 A, 10 ft cord. Pumps up to 50 gpm/3000 gph. 1 year warranty from Superior Pump. Whether you need to remove water from a window well, basement or rooftop, this portable pump is versatile enough for the job.
Superior Pump 92370 Submersible Sump Pumps Wayne PC2 Transfer Pump Kits Wayne PC1 Transfer Pump Kits
1/3 hp split capacitor motor, high efficiency, low Amp draw, corrosion-resistant plastic, 10 ft grounded water proof power cord, pumps up to 48 gpm, 2880 gph, side and bottom intake provides for clog-resistant suction, tethered float switch with piggy back plug included, cooler operating 115 V motor provides continuous duty, pump will lift water over 25 ft. vertical height, handles 3/8 in solids, 1-1/2 in female iron pipe discharge thread. 1 year warranty from Superior Pump Co. These self-priming transfer pumps are designed to easily transfer water from one point to another. Model PC2, 120 V transfer pump is great for household usage. Typical applications include removing water from waterbeds, clogged sinks, basements and more. Do not use PC2 in pool areas. The motors on both models PC1 and PC2 are non-submersible. These self-priming transfer pumps are designed to easily transfer water from one point to another. Model PC1, 12 V transfer pump is convenient when normal power is not readily available. Typical applications include removing water from pool covers, clogged drains, stock tanks, water basins, boats, cisterns, etc.
Little Giant RL-SP25T Submersible Sump Pump With Tethered Float Switch Superior Pump 92331 Sump Pumps Superior Pump 92372 Submersible Sump Pumps
Automatic submersible sump pump. Ideal for use in basins 14 in Dia or greater with light water removal needs. Reinforced thermoplastic pump housing and base are corrosion and rust-resistant. Tethered float switch provides reliable automatic operation. 2900 gph. 1/3 hp split capacitor motor, high efficiency, low Amp draw, rugged cast iron construction, 10 ft grounded water proof power cord, pumps up to 46gpm, 2760 gph, side and bottom intake provides for clog-resistant suction, tethered float switch with piggy back plug included, cooler operating 115V motor provides continuous duty, pump will lift water over 25 ft vertical height, handles 3/8 in solids, 1-1/2 in female iron pipe discharge thread. Stainless steel impeller. 3 years warranty from Superior Pump Co. 1/3 hp split capacitor motor, high efficiency, low amp draw, corrosion-resistant plastic, 10 ft grounded waterproof power cord, pumps up to 48 gpm, 2880 gph, side and bottom intake provides for clog-resistant suction, vertical float switch with piggy back plug included, cooler operating 115V motor provides continuous duty, pump will lift water over 25 ft vertical height, handles 3/8 in solids, 1-1/2 in female iron pipe discharge thread. 1 year warranty from Superior Pump Co.
Sta-Rite M40P Simer Superior Pump 92301 Pedestal Sump Pumps PUMP PLASTIC PEDESTAL 1/2HP
Non-submersible, multi-purpose pump designed for emergency dewatering, draining aquariums, waterbeds and clogged sinks. Pumps up to 350 gph. Pumps down to 1/8 in. Corrosion-resistant compact construction maximizes pump life. Self-priming at 6 ft vertically, pump will push water 40 ft high. Easy to use. Includes 6 ft power cord, 6 ft garden hose and suction attachment. CSA certified. For use with sump basins 12 in or larger. Cast iron base, metal switch arm, 1-1/2 in discharge, stainless steel drive shaft, impeller and float ball. Will handle liquids up to 180 deg F. Current rating of 2.76 A, 10 ft cord. Pumps up to 50 gpm/3000 gph. 3 years warranty from Superior Pump. Thermoplastic base, fully adjustable automatic switch, non-corrosive steel drive shaft. Metal switch arm for strength and durability. 1-1/2 in discharge for high capacity pumping. For use in sump basins 12 in or larger. 10 ft cord, stainless steel impeller. 3.06 amp. Pumps up to 60 gpm/3600 gph. 1year warranty from Superior Pump.
PUMP UTILITY SUBMERSIBLE 1/6HP Sta-Rite 2300 Simer Wayne SPF33 Submersible Sump Pumps
The Wayne WWB WaterBUG? submersible water removal pump with multi-flow technology, is the tool for you, our patent pending multi-flo technology is key and allows the user, easy selection of the appropriate discharge for the water removal application. The top discharge should be used to drain water from confined spaces, a window well, laundry tub, even from 5 gal buckets. Side discharge should be selected for easy water removal from open areas, flat roofs, flooded basements, shower stalls, flooded yard. Our patent pending multi ring suction strainer filters debris, keeping it clear from the suction intake which minimizes clogging. This powerful tool pumps up to 1350 gal/Hr, connects to a standard garden hose and removes water down to a 1/16 in of the surface, making the area virtually dry, for quality you can trust. Stop allowing water to bug you. Remove it with WaterBUG? Wayne's WaterBUG? submersible water removal pump with multi-flo technology, is the water removal tool for every home. Wayne WaterBUG's? patent pending multi-flo technology is key and allows the user, easy selection of the appropriate discharge for any water removal application. Our easy to clean, multi ring suction strainer removes water down to virtually dry at 1/16 of an in. Proudly assembled in the USA, for quality you can trust. The Simer? Geyser? classic is one of the most durable, heavy-duty constructed utility pumps in the market today. 1/3 hp coated steel and reinforced thermoplastic submersible sump pump. Assembled in the US with foreign and domestic parts. Float switch tested to 1 million cycles. Top suction design eliminates air locks and clogging from debris in bottom of sump pit. Epoxy-coated steel motor housing and corrosion-resistant, thermoplastic pump base. Fully submersible. 1/3 hp max flow rate is 3600 gph at 0 ft. 1 1/2 NPT discharge. For use in 11 in Dia or larger sump basins.
Superior Pump 92341 Sump Pumps Flotec FPZS25T Submersible Sump Pump With Tethered Float Switch PUMP SUBMERSIBLE UTIL 1/2HP
1/3 hp split capacitor motor, high efficiency, low draw, rugged cast iron construction, 10 ft grounded water proof power cord, pumps up to 46 gpm, 2760 gph, side and bottom intake provides for clog-resistant suction, vertical float switch with piggy back plug included, cooler operating 115 V motor provides continuous duty, pump will lift water over 25 ft vertical height, handles 3/8 in solids, 1-1/2 in female pipe discharge thread. Stainless steel impeller. 3 years warranty from Superior Pump Co. Flotec's 1/4 hp sump pump with energy efficient design that produces high output performance. Constructed from engineered composites providing dependable, corrosion-resistant service for years to come. Tethered On/Off float switch. Continuous duty, thermally protected split capacitor motor. Pumps will lift water up to 25 ft of vertical height. Tough thermoplastic construction. Large 1-1/2 in discharge for high capacity pumping. Garden hose adapter included. Can be used as a sump pump by adding an optional float switch. 4.9 A, side discharge, stainless steel impeller, handles 3/8 in solids, 10 ft cord. Pumps up to 55 gpm/3300 gph. 3 years warranty from Superior Pump.
Sta-Rite BW85P Non-Submersible Utility Pump Superior Pump 92572 Submersible Sump Pumps Simer 2905 Submersible Sump Pump With Tethered Switch
Non-submersible, multi-purpose pump designed for a variety of applications: emergency draining, emptying water-logged septic systems, water garden supply and water transferring. Pumps up to 450 gph. Pumps down to 1/8 in. Corrosion-resistant, compact construction maximizes pump life. Easy to use. Includes 6 ft garden hose, 6 ft battery clamp motor cord and suction attachment. 1/2 hp heavy-duty split capacitor motor high efficiency low Amp draw, corrosion-resistant plastic, 10 ft grounded waterproof power cord, pumps up to 55 gpm, 3300 gph, side and bottom intake provides for clog-resistant suction, vertical float switch with piggy back plug included, cooler operating 115V motor provides continuous duty, pump will lift water over 25 ft. vertical height, handles 3/8 in solids, 1-1/2 female iron pipe discharge thread. Stainless steel impeller. 3 years warranty from Superior Pump Co. Durable thermoplastic resists corrosion. Automatic operation, designed for minimum 14 in sump basins. Pumps up to 3200 gph. Dependable motor and float switch for automatic or manual operation. 1-1/2 in discharge and 8 ft power cord. Self-cleaning screen reduces maintenance. CSA certified.
Wayne SPF50 Submersible Sump Pumps Superior Pump 92501 Sump Pumps PED PUMP 1/2 HP SS/CAST IRON
1/2 hp coated steel and reinforced thermoplastic submersible sump pump. Assembled in the US with foreign and domestic parts. Float switch tested to 1 million cycles. Top suction pump design eliminates air locks and clogging from debris in bottom of sump pit. Epoxy-coated steel motor housing and corrosion-resistant, thermoplastic pump base. Fully submersible. 1/2 hp, max flow rate is 3900 at 0 ft 1-1/2 in NPT discharge. For use in 11 in. diameter or larger sump basins. 1/2 hp heavy-duty split capacitor motor, high efficiency, low Amp draw, rugged cast iron construction, 10 ft grounded waterproof power cord, pumps up to 70 gpm, 4200 gph, side and bottom intake provides for clog-resistant suction, tethered float switch with piggy back plug included, pump will lift water over 25 ft. vertical height, handles 1/2 in solids, 1-1/2 in female iron pipe discharge thread. 3 years warranty from Superior Pump Co. Cast iron base, fully adjustable automatic switch, metal switch arm, for use with sump basins 12 in or larger, 1-1/2 in discharge, non-corrosive stainless steel drive shaft, impeller and float ball. Will handle liquids up to 180 deg F. Cord size of 10 ft. Rated at 3.06 A.
PUMP SUMP 1/2HP CAST IRON     Superior Pump 90050 Transfer Pump Pacer P-58-0206 Quick Connect
Continuous duty, thermally protected split capacitor motor. Pumps will lift water up to 25 ft of vertical height. Large 1-1/2 in discharge for high capacity pumping. Can be used as a utility pump by removing the float switch. 4.9 AMP, 10 ft cord, stainless steel impeller. Pumps up to 55 gpm/3300 gph. 3 years warranty from Superior Pump. Rugged cast iron construction, 3/4 in NPT suction and discharge, 10 ft power cord, built-in carrying handle. Includes brass garden hose adapters, suction strainer and an additional set of motor brushes. Uses drain water heaters, fill radiant heating systems, as a pressure booster, water transfer. Not recommended for use as a sprinkler pump. 8.4 A, pumps up to 25 gpm/1500 gph, 1 year warranty from Superior Pump. Pacer Pumps hose accessories kits include 20 ft PVC suction hose, 25 ft PVC discharge hose, with either threaded connections or Camelot? polypropylene quick-connect couplers. Also included in each kit is a polypropylene discharge elbow, polyethylene suction strainer and a roll of Teflon tape to seal connections. Hose Kit available in 1-1/2, 2 or 3 in with threaded connections or quick-connect couplers.
Flotec FPZS33T Submersible Sump Pump With Tethered Float Switch Simer 2957 Submersible Sump Pump With Vertical Side Switch Simer 2955 Submersible Sump Pump With Tethered Switch
Flotec's 1/3 hp sump pump with energy efficient design that produces high output performance. Constructed from engineered composites providing dependable, corrosion-resistant service for years to come. Tethered On/Off float switch. Durable thermoplastic resists corrosion. Automatic operation, designed for minimum 10 in sump basins. Pumps up to3600 gph. Powerful motor with automatic thermal overload protection. 1-1/2 in discharge and 8 ft power cord. Self-cleaning screen reduces maintenance. CSA certified. Durable thermoplastic resists corrosion. Automatic operation, designed for minimum 14 in sump basins. Pumps up to 3600 gph. Powerful motor with automatic thermal overload protection. 1-1/2 in discharge and 8 ft power cord. Self-cleaning screen reduces maintenance. CSA certified.
Superior Pump 92372RTG-P Ready To Go Simer 2975PC Submersible Sump Pump With Tethered Float Switch PUMP SUMP 1/3HP HI-FLOW CAST
Thermoplastic construction, continuous duty, thermally protected, split capacitor motor, will lift water up to 25 ft of vertical height, 1-1/2 discharge, 4.1 A, 10 ft cord. 3/8 in solids handling, pump is mounted to base to prevent clogging and switch malfunction. Vertical float switch, pre-plumbed with check valve and discharge pipe. 1 year warranty from Superior Pump. Automatic submersible sump pump. Maximum pumping capacity to 400 gph. Rugged thermoplastic body resists corrosion, impact, stress and heat. Tethered float switch designed for minimum 14 in Dia sump basin. 1-1/2 in NPT discharge, coupling included. Easy installation, replaced pedestal or submersible sump pumps. CSA certified. Continuous duty, thermally protected split capacitor motor. Pumps will lift water up to 25 ft of vertical height. Rugged cast iron construction. Large 1-1/2 in discharge for high capacity pumping. Can be used as a utility pump by removing the float switch. 10 ft cord, handles up to 1/2 in solids, 7.6 A, Pumps up to 60 gpm/3600 gph. 3 years warranty from Superior Pump.
PUMP HYDROPONIC 1200 GPH      Wayne CDU Submersible Sump Pump SUMP P PUMP 1/2 HP SS/CAST
Pumps 1200 gph at 1 ft. Quiet operation for a better indoor experience. Corrosion and rust-resistant epoxy-coated cast aluminum pump housing. Removes water to within 1/8 in of surface. Bottom intake design with pre-screen to protect against debris. 1/3 hp cast iron and coated steel submersible sump pump. Assembled in the US with foreign and domestic parts. Float switch tested to 1 million cycles. Top suction pump design eliminates air locks and clogging from debris in bottom of sump pit. Epoxy-coated steel motor housing and rugged, cast iron pump base. Fully submersible. 1/3 hp, max flow rate is 3800 gph at 0 ft 1-1/2 in. NPT discharge. For use in 11 in. diameter or larger sump basins, 9 in ON level and 4 in OFF level. Continuous duty, thermally protected - split capacitor motor. Will lift water up to 25 ft of vertical height. Cast iron construction. Large 1-1/2 in discharge. Can be used as a utility pump by removing float switch. 4.9 A, 10 ft cord, side discharge, handles 3/8 in solids, stainless steel impeller.
PUMP LAWN PORT 1HP STAINLESS  Superior Pump 92511 Submersible Sump Pumps Superior Pump 93501 Continuous Duty Sewage Pump
Powerful 1 hp fan cooled, 115 V motor. Corrosion-resistant stainless steel housing. Integral carry handle for portability. Convenient on/off switch. 1 in NPT Suction and discharge. 165 ft total dynamic head. Pressure up to 72 psi. Garden hose adapters included. Rated at 115 V, 5.2 A. Maximum pressure rating of 72 psi. Maximum flow rate of 830 gph. 1 year warranty from Superior Pump. Continuous duty thermally protected split capacitor motor, lifts water up to 25 ft of vertical height, cast iron construction, 1-1/2 in discharge, 7.6 amp, 10 ft cord. Vertical float switch, side discharge, 3 years warranty, pumps up to 70 gpm, 4200 gph. 1/2 hp heavy-duty split capacitor motor, high efficiency, low Amp draw, rugged cast iron construction, 10 ft grounded waterproof power cord, pumps up to 80 gpm, 4800 gph, bottom intake provides for clog-resistant suction, clog-free metal vortex impeller, tethered float switch with piggy back plug included, pump will lift water over 25 ft vertical height, handles 2 in solids, 2 in female iron pipe discharge thread. Cast aluminum, non-clogging vortex impeller. 1 year warranty from Superior Pump Co.
Sta-Rite FPOS1775A Flotec Flotec FPZS50T Submersible Sump Pump With Tethered Float Switch PUMP HYDROPONIC AUTO 1200 GPH
The IntelliPump?, just plug this pump in and it automatically checks for traces of water, whether you are pumping basements or draining puddles. Flotec's 1/2 hp sump pump with energy efficient design that produces high output performance. Constructed from engineered composites providing dependable, corrosion-resistant service for years to come. Tethered On/Off float switch. Pumps 1200 gph at 1 ft. Quiet operation for a better indoor experience. Corrosion and rust-resistant epoxy-coated cast aluminum pump housing. Removes water to within 1/8 in of surface. Bottom intake design with pre-screen to protect against debris.
Wayne CDU800 Submersible Sump Pumps Flotec FPSC3350A Submersible Sump Pump Superior Pump 92751 Sump Pump
1/2 hp cast iron and coated steel submersible sump pump. Assembled in the US with foreign and domestic parts. Float switch tested to 1 million cycles. Top suction design eliminates air locks and clogging from debris in bottom of sump pit. Epoxy-coated steel motor housing and rugged, cast iron base. Fully submersible. 1/2 hp, max flow rate is 4200 gph at 0 ft 1-1/2 in NPT discharge. For use in 11 in Dia or larger sump basins. 9 in ON level and 4 in OFF level. This rugged cast iron sump pump is designed with a recessed vortex impeller virtually resist clogs and is designed to handle 1/2 in solids. Ideal for light effluent applications such as dishwashers, wet bars, showers and more. Continuous duty, thermally protected split capacitor motor, lifts water up to 25 ft vertical height, rugged stainless steel and cast iron construction, 2 in discharge for high capacity pumping, 1-1/2 in NPT adapter included, clog-resistant thermoplastic vortex impeller. Can be used as a utility pump by removing the float switch. Pumps up to 80 gpm to 4800 gph, handles 1/2 in solids, 3 years warranty from Superior Pump.
Flotec FPZT7350 High Output Submersible Sump Pump SUMP PUMP CAST IRON 3/4HP     Wayne RPP50 Sewage Pumps
Rugged stainless steel and zinc construction. Heavy-duty high efficiency motor. Piggy-back style switch for automatic or manual operation, for minimum 10 in sump diameter. Pumps up to 6000 gph. 8 ft grounded power cord. 1-1/2 in NPT discharge. CSA Certified. 3/4 hp cast iron and stainless steel submersible sump pump. Assembled in the US with foreign and domestic parts. Top suction design eliminates air locks and clogging from debris in bottom of sump pit. Stainless steel motor housing and rugged, cast iron pump base. Fully submersible. 3/4 hp, max flow rate is 4600 gph at 0 ft 1-1/12 in NPT discharge. For use in 11 in Dia or larger sump basins. 9 in ON level and 4 in OFF level. 1/2 hp cast iron submersible sewage pump. Maximum flow rate is 4800 gph at 0 ft. Durable, cast iron submersible sewage pump. Size of 2 in. NPT discharge capable of handling up to 2 in. solids. Ideal for basement- or below-grade installations.
BATTERY 75AMP SEALD LEAD ACID Flotec FPZT7450 High Output Submersible Sump Pump Superior Pump 92900 Battery Back Up Kit
Superior Pump Sealed Lead Acid Pump Battery, Specifications: 12 V, 75 Ah, Dimensions: 10-1/4 in L x 6-1/2 in W x 9-1/2 in H Rugged stainless steel and cast iron construction. Heavy-duty high efficiency motor. Piggy-back style switch for automatic or manual operation, for minimum 10 in sump diameter. Pumps up to 6300 gph. 8 ft grounded power cord. 1-1/2 in NPT discharge. CSA Certified. Superior Pump Battery Back Up Kit, Suitable For Use With: Sump Pumps, 12 VDC, Tethered Switch, 10 ft Cord, 1-1/4 in Discharge Size, Thermoplastic. Works with 12 V lead-acid, deep-cycle marine/RV and AGM batteries. Recommended minimum 40 Ah rating. Example Orgill SKU 7151525, Superior Pump number 99717.
Wayne PC4 Electric Non-Submersible Utility Pump Flotec FPZT7550 High Output Submersible Sump Pump Flotec E50VLT Professional Submersible Sump Pump
This self-priming portable utility pump is designed to be used as a transfer pump for such applications as emptying water heaters, livestock tanks and more. Pump can also be used for an intermittent pressure boost for applications such as washing cars, cleaning driveways and more. The motor is air cooled, it is not designed to operate under water. Corrosion-resistant zinc construction, dissipates heat quickly and extends motor life, uni-body motor housing eliminates leak points, stainless steel fasteners, Quadra-Seal? technology provides excellent motor protection, smooth flow hydraulics delivers excellent performance, vertical float switch operates in a 10 in or larger sump basin, pumps up to 6660 gph maximum lift of 29 ft. Vertical switch, 115 V, 10 ft cord, CSA and CUS listed, energy-efficient PSC motor, rustproof impeller, 1-1/2 in FNPT discharge pipe, 3/8 in maximum solid handling.
Sta-Rite FPOS1800LTS Sink Pump System Tsurumi HS Agitator Trash Pump Wayne CSE50TE Sewage Pumps
Under-sink basin system with 1/3 hp sump pump, pumps up to 3600 gph. Ideal for pumping washing machine, wet bar and air conditioning drainage without an in-ground basin. Heavy-duty 6 gal structural foam drainage tank. Easy installation, eliminates need for expensive plumbing renovation. CSA certified. Handles up to 20% of sand, solids, leaves and debris without clogging. Semi-vortex urethane rubber impeller with shaft mounted agitator suspends solids and allows for pumping of sand and stringy material. Continuous duty, air filled copper wound motor with class B insulation. Built-in thermal protection prevents motor failure due to overloading, accidental run-dry and single phasing in three phase units. Double inside mechanical seals with silicon carbide faces (both top and bottom) run in an oil filled chamber. Double shielded, permanently lubricated, high temperature C3 ball bearings rated for a B-10 life or 60,000 hrs provide for extended operational life. 2 years commercial warranty. Designed for residential and light commercial sewage applications. Ideal for basement- or below-grade installations. Maximum pumping capacity of 7680 gph. Cast iron motor and pump housing. Automatic operation with replaceable piggyback tether float switch. 2 in discharge and capable of handling 2 in NPT solids. Designed for 18 in Dia or larger basins.
Simer 2825SS Non-Submersible Utility Pump Superior Pump 93015 Pre-Plumbed Sewage Pump Kit Pacer SE2PLE550 Centrifugal Pumps
Use as a portable sprinkler or water transfer pump. Ideal for boosting pressure to wash cars, boats and lawn sprinkling. Supports multiple lawn sprinklers pumping from lakes, streams or ponds. Maximum pumping capacity to 10 gpm. Pressures to 80 psi, suction lifts to 20 ft. Continuous duty rated, 1 hp, 115 V motor. Stainless steel pump housing with excellent self-priming capability. 1 in threaded suction and discharge, garden hose fitting and 6 ft power cord included. 1/2 hp, 7.6 A sewage pump (93501) features cast iron, tethered, 2 in discharge, cast aluminum vortex impeller and 10 ft cord. Includes 18 in x 30 in basin, 18 in cover, check valve and snap-in plug. Basin features are structural foam construction, air tight molded reusable PVC, corrosion-resistant, 4 in inlet hub, 2 in discharge and vent, 30 gal capacity, built-in torque stops. Check valve features: heavy-duty rubber boots, stainless steel clamps, full flow design, 2 in connections. Snap-in hub features heavy-duty stainless steel clamp, water and vapor tight seal. Fits 4 in DWV SCH 40/80 pipe. Pacer's S Series self-priming centrifugal pumps are light-weight and chemically resistant for general service on water, salt water, waste water, mild acids and bases. This is our most popular pump across multiple markets. They feature stainless steel internal fasteners, Viton?, EPDM or Buna O-ring with stainless steel external fasteners. There is a non-metallic option which minimizes solution contact with internal metal parts. The pumps are molded of tough, glass-reinforced polyester, polypropylene or Ryton?. Polyester models are available with or without lined volute for abrasion resistance.